[5/6] dt-bindings: Add Tegra PMC pad configuration bindings

Document the pinctrl bindings used by the PMC driver for performing pad
configuration. Both nvidia,tegra186-pmc.txt and nvidia,tegra20-pmc.txt
are modified as they both cover SoC generations for which these bindings
apply.

Add a header defining Tegra PMC pad voltage configurations.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
 .../bindings/arm/tegra/nvidia,tegra186-pmc.txt     | 84 +++++++++++++++++++
 .../bindings/arm/tegra/nvidia,tegra20-pmc.txt      | 95 ++++++++++++++++++++++
 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h | 18 ++++
 3 files changed, 197 insertions(+)
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h

On 10/07/18 13:54, Aapo Vienamo wrote:
> Document the pinctrl bindings used by the PMC driver for performing pad
> configuration. Both nvidia,tegra186-pmc.txt and nvidia,tegra20-pmc.txt
> are modified as they both cover SoC generations for which these bindings
> apply.
> 
> Add a header defining Tegra PMC pad voltage configurations.
> 
> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
> ---
>  .../bindings/arm/tegra/nvidia,tegra186-pmc.txt     | 84 +++++++++++++++++++
>  .../bindings/arm/tegra/nvidia,tegra20-pmc.txt      | 95 ++++++++++++++++++++++
>  include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h | 18 ++++
>  3 files changed, 197 insertions(+)
>  create mode 100644 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
> 
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> index 5a3bf7c..baa31f7 100644
> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
> @@ -34,3 +34,87 @@ Board DTS:
>  	pmc@c360000 {
>  		nvidia,invert-interrupt;
>  	};
> +
> +== Pad Control Nodes ==
> +
> +The PMC can be used to set pad power state and voltage configuration.
> +The pad configuration is done via the pinctrl framework. The driver
> +implements power-source, low-power-enable, and low-power-disable pinconf
> +pin configuration node properties. Each pinctrl pin corresponds to a
> +single Tegra PMC pad. Thus, in the following sections of this document
> +pin refers to the pinctrl frameworks notion of a Tegra PMC pad.
> +
> +The pad configuration state nodes are placed under the pmc node and they
> +are referred to by the pinctrl client device properties. For more
> +information see the examples presented later and
> +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
> +
> +The values accepted by power-source property are
> +TEGRA_IO_PAD_VOLTAGE_1V8 and TEGRA_IO_PAD_VOLTAGE_3V3, which are defined
> +in dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
> +
> +Following pinctrl pin name strings are present on Tegra186:
> +csia		csib		dsi		mipi-bias
> +pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
> +usb0		usb1		usb2		usb-bias
> +uart		audio		hsic		dbg
> +hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
> +sdmmc4		cam		dsib		dsic
> +dsid		csic		csid		csie
> +dsif		spi		ufs		dmic-hv
> +edp		sdmmc1-hv	sdmmc3-hv	conn
> +audio-hv
> +
> +All of the listed Tegra186 pins support the low-power-enable and
> +low-power-disable properties. The power-source property is supported
> +following Tegra210 pins: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, and
> +audio-hv.
> +
> +Pad configuration state example:
> +	pmc: pmc@7000e400 {
> +		compatible = "nvidia,tegra186-pmc";
> +		reg = <0 0x0c360000 0 0x10000>,
> +		      <0 0x0c370000 0 0x10000>,
> +		      <0 0x0c380000 0 0x10000>,
> +		      <0 0x0c390000 0 0x10000>;
> +		reg-names = "pmc", "wake", "aotag", "scratch";
> +
> +		...
> +
> +		sdmmc1_3v3: sdmmc1-3v3 {
> +			pins = "sdmmc1-hv";
> +			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
> +		};
> +
> +		sdmmc1_1v8: sdmmc1-1v8 {
> +			pins = "sdmmc1-hv";
> +			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
> +		};
> +
> +		hdmi_off: hdmi-off {
> +			pins = "hdmi";
> +			low-power-enable;
> +		}
> +
> +		hdmi_on: hdmi-on {
> +			pins = "hdmi";
> +			low-power-disable;
> +		}
> +	};
> +
> +Pinctrl client example:
> +	sdmmc1: sdhci@3400000 {
> +		...
> +		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
> +		pinctrl-0 = <&sdmmc1_3v3>;
> +		pinctrl-1 = <&sdmmc1_1v8>;
> +	};
> +
> +	...
> +
> +	sor0: sor@15540000 {
> +		...
> +		pinctrl-0 = <&hdmi_off>;
> +		pinctrl-1 = <&hdmi_on>;
> +		pinctrl-names = "hdmi-on", "hdmi-off";
> +	};
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
> index a74b37b..d50a505 100644
> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
> @@ -195,3 +195,98 @@ Example:
>  		power-domains = <&pd_audio>;
>  		...
>  	};
> +
> +== Pad Control Nodes ==
> +
> +The PMC can be used to set pad power state and voltage configuration.
> +This functionality is present on SoCs from Tegra124 onwards. The pad
> +configuration is done via the pinctrl framework. The driver implements
> +power-source, low-power-enable, and low-power-disable pinconf pin
> +configuration node properties. Each pinctrl pin corresponds to a single
> +Tegra PMC pad. Thus, in the following sections of this document pin
> +refers to the pinctrl frameworks notion of a Tegra PMC pad.
> +
> +The pad configuration state nodes are placed under the pmc node and they
> +are referred to by the pinctrl client device properties. For more
> +information see the examples presented later and
> +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
> +
> +The values accepted by power-source property are
> +TEGRA_IO_PAD_VOLTAGE_1V8 and TEGRA_IO_PAD_VOLTAGE_3V3, which are defined
> +in dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
> +
> +Following pinctrl pin name strings are present on Tegra124 and Tegra132:
> +audio		bb		cam		comp
> +csia		csb		cse		dsi
> +dsib		dsic		dsid		hdmi
> +hsic		hv		lvds		mipi-bias
> +nand		pex-bias	pex-clk1	pex-clk2
> +pex-cntrl	sdmmc1		sdmmc3		sdmmc4
> +sys_ddc		uart		usb0		usb1
> +usb2		usb_bias
> +
> +All of the listed Tegra124 and Tegra132 pins support the
> +low-power-enable and low-power-disable properties. None of the pins
> +support the power-source property.
> +
> +Following pinctrl pin name strings are present on Tegra210:
> +audio		audio-hv	cam		csia
> +csib		csic		csid		csie
> +csif		dbg		debug-nonao	dmic
> +dp		dsi		dsib		dsic
> +dsid		emmc		emmc2		gpio
> +hdmi		hsic		lvds		mipi-bias
> +pex-bias	pex-clk1	pex-clk2	pex-cntrl
> +sdmmc1		sdmmc3		spi		spi-hv
> +uart		usb0		usb1		usb2
> +usb3		usb-bias
> +
> +All of the listed Tegra210 pins except pex-cntrl support the
> +low-power-enable and low-power-disable properties. The power-source
> +property is supported following Tegra210 pins: audio, audio-hv, cam,
> +dbg, dmic, gpio, pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
> +
> +Pad configuration state example:
> +	pmc: pmc@7000e400 {
> +		compatible = "nvidia,tegra210-pmc";
> +		reg = <0x0 0x7000e400 0x0 0x400>;
> +		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
> +		clock-names = "pclk", "clk32k_in";
> +
> +		...
> +
> +		sdmmc1_3v3: sdmmc1-3v3 {
> +			pins = "sdmmc1";
> +			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
> +		};
> +
> +		sdmmc1_1v8: sdmmc1-1v8 {
> +			pins = "sdmmc1";
> +			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
> +		};
> +
> +		hdmi_off: hdmi-off {
> +			pins = "hdmi";
> +			low-power-enable;
> +		}
> +
> +		hdmi_on: hdmi-on {
> +			pins = "hdmi";
> +			low-power-disable;
> +		}
> +	};
> +
> +Pinctrl client example:
> +	sdmmc1: sdhci@700b0000 {
> +		...
> +		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
> +		pinctrl-0 = <&sdmmc1_3v3>;
> +		pinctrl-1 = <&sdmmc1_1v8>;
> +	};
> +	...
> +	sor@54540000 {
> +		...
> +		pinctrl-0 = <&hdmi_off>;
> +		pinctrl-1 = <&hdmi_on>;
> +		pinctrl-names = "hdmi-on", "hdmi-off";
> +	};
> diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h b/include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
> new file mode 100644
> index 0000000..20f4340
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * pinctrl-tegra-io-pad.h: Tegra I/O pad source voltage configuration constants
> + * pinctrl bindings.
> + *
> + * Copyright (c) 2018, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * Author: Aapo Vienamo <avienamo@nvidia.com>
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
> +#define _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
> +
> +/* Voltage levels of the I/O pad's source rail */
> +#define TEGRA_IO_PAD_VOLTAGE_1V8	0
> +#define TEGRA_IO_PAD_VOLTAGE_3V3	1
> +
> +#endif

Looks good to me.

Acked-by: Jon Hunter <jonathanh@nvidia.com>

Cheers
Jon