diff mbox

[1/5] i2c: tegra: use readl_poll_timeout after config_load reg programmed

Message ID 1472650254799.24331@nvidia.com
State Deferred
Headers show

Commit Message

Shardar Shariff Md Aug. 31, 2016, 1:30 p.m. UTC 
Sorry ignore this series, forgot to mention patch series version.
Pushed v11 series, please review v11 series.

Thanks,
Shardar
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d86a993..e93c72a 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -30,6 +30,7 @@ 
 #include <linux/reset.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/iopoll.h>

 #include <asm/unaligned.h>

@@ -112,6 +113,8 @@ 
 #define I2C_CLKEN_OVERRIDE                     0x090
 #define I2C_MST_CORE_CLKEN_OVR                 BIT(0)

+#define I2C_CONFIG_LOAD_TIMEOUT                        1000000
+
 /*
  * msg_end_type: The bus control which need to be send at end of transfer.
  * @MSG_END_STOP: Send stop pulse at end of transfer.
@@ -448,7 +451,6 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
        u32 val;
        int err;
        u32 clk_divisor;
-       unsigned long timeout = jiffies + HZ;

        err = pm_runtime_get_sync(i2c_dev->dev);
        if (err < 0) {
@@ -497,15 +499,18 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
                i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);

        if (i2c_dev->hw->has_config_load_reg) {
+               unsigned long reg_offset;
+               void __iomem *addr;
+
+               reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
+               addr = i2c_dev->base + reg_offset;
                i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
-               while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
-                       if (time_after(jiffies, timeout)) {
-                               dev_warn(i2c_dev->dev,
-                                       "timeout waiting for config load\n");
-                               err = -ETIMEDOUT;
-                               goto err;
-                       }
-                       msleep(1);
+               err = readl_poll_timeout(addr, val, val == 0, 1000,
+                                        I2C_CONFIG_LOAD_TIMEOUT);
+               if (err) {
+                       dev_warn(i2c_dev->dev,
+                                "timeout waiting for config load\n");
+                       goto err;
                }
        }