diff mbox

ARM: tegra: Use consistent indentation for SATA node

Message ID 1443081605-17146-1-git-send-email-thierry.reding@gmail.com
State Accepted
Headers show

Commit Message

Thierry Reding Sept. 24, 2015, 8 a.m. UTC
From: Thierry Reding <treding@nvidia.com>

The indentation for properties in the SATA device tree node on Tegra124
deviates from the rest of the device tree file. Restore consistency and
get rid of a couple of gratuitous blank lines while at it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ac8a6a567935..ee0cf9e99772 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -624,28 +624,21 @@ 
 
 	sata@0,70020000 {
 		compatible = "nvidia,tegra124-ahci";
-
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
-			<0x0 0x70020000 0x0 0x7000>; /* SATA */
-
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			<&tegra_car TEGRA124_CLK_SATA_OOB>,
-			<&tegra_car TEGRA124_CLK_CML1>,
-			<&tegra_car TEGRA124_CLK_PLL_E>;
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
 		resets = <&tegra_car 124>,
-			<&tegra_car 123>,
-			<&tegra_car 129>;
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-
 		power-domains = <&pmc TEGRA_POWERGATE_SATA>;
-
 		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
 		phy-names = "sata-phy";
-
 		status = "disabled";
 	};