[v5,7/8] ata: Add support for the Tegra124 SATA controller

This adds support for the integrated AHCI-compliant Serial ATA
controller present on the NVIDIA Tegra124 system-on-chip.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
v5: let ahci_platform handle sata clock and also handle it ourselves.
  this allows use of ahci_platform while having a special sequence
  for the clock.

 drivers/ata/Kconfig      |   9 ++
 drivers/ata/Makefile     |   1 +
 drivers/ata/ahci_tegra.c | 377 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 387 insertions(+)
 create mode 100644 drivers/ata/ahci_tegra.c

Hi,

On 07/18/2014 09:12 AM, Mikko Perttunen wrote:
> This adds support for the integrated AHCI-compliant Serial ATA
> controller present on the NVIDIA Tegra124 system-on-chip.
> 
> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
> ---
> v5: let ahci_platform handle sata clock and also handle it ourselves.
>   this allows use of ahci_platform while having a special sequence
>   for the clock.

Thanks, I like this one, much better then what we had before.

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans



> 
>  drivers/ata/Kconfig      |   9 ++
>  drivers/ata/Makefile     |   1 +
>  drivers/ata/ahci_tegra.c | 377 +++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 387 insertions(+)
>  create mode 100644 drivers/ata/ahci_tegra.c
> 
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index b0d5b5a..e1b9278 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -142,6 +142,15 @@ config AHCI_SUNXI
>  
>  	  If unsure, say N.
>  
> +config AHCI_TEGRA
> +	tristate "NVIDIA Tegra124 AHCI SATA support"
> +	depends on ARCH_TEGRA
> +	help
> +	  This option enables support for the NVIDIA Tegra124 SoC's
> +	  onboard AHCI SATA.
> +
> +	  If unsure, say N.
> +
>  config AHCI_XGENE
>  	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
>  	depends on PHY_XGENE
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 5a02aee..ae41107 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_MVEBU)	+= ahci_mvebu.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_ST)		+= ahci_st.o libahci.o libahci_platform.o
> +obj-$(CONFIG_AHCI_TEGRA)	+= ahci_tegra.o libahci.o libahci_platform.o
>  obj-$(CONFIG_AHCI_XGENE)	+= ahci_xgene.o libahci.o libahci_platform.o
>  
>  # SFF w/ custom DMA
> diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
> new file mode 100644
> index 0000000..d30bb21
> --- /dev/null
> +++ b/drivers/ata/ahci_tegra.c
> @@ -0,0 +1,377 @@
> +/*
> + * drivers/ata/ahci_tegra.c
> + *
> + * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * Author:
> + *	Mikko Perttunen <mperttunen@nvidia.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/ahci_platform.h>
> +#include <linux/reset.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/tegra-powergate.h>
> +#include <linux/regulator/consumer.h>
> +#include "ahci.h"
> +
> +#define SATA_CONFIGURATION_0				0x180
> +#define SATA_CONFIGURATION_EN_FPCI			BIT(0)
> +
> +#define SCFG_OFFSET					0x1000
> +
> +#define T_SATA0_CFG_1					0x04
> +#define T_SATA0_CFG_1_IO_SPACE				BIT(0)
> +#define T_SATA0_CFG_1_MEMORY_SPACE			BIT(1)
> +#define T_SATA0_CFG_1_BUS_MASTER			BIT(2)
> +#define T_SATA0_CFG_1_SERR				BIT(8)
> +
> +#define T_SATA0_CFG_9					0x24
> +#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT		13
> +
> +#define SATA_FPCI_BAR5					0x94
> +#define SATA_FPCI_BAR5_START_SHIFT			4
> +
> +#define SATA_INTR_MASK					0x188
> +#define SATA_INTR_MASK_IP_INT_MASK			BIT(16)
> +
> +#define T_SATA0_AHCI_HBA_CAP_BKDR			0x300
> +
> +#define T_SATA0_BKDOOR_CC				0x4a4
> +
> +#define T_SATA0_CFG_SATA				0x54c
> +#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN		BIT(12)
> +
> +#define T_SATA0_CFG_MISC				0x550
> +
> +#define T_SATA0_INDEX					0x680
> +
> +#define T_SATA0_CHX_PHY_CTRL1_GEN1			0x690
> +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK		0xff
> +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT		0
> +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK		(0xff << 8)
> +#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT	8
> +
> +#define T_SATA0_CHX_PHY_CTRL1_GEN2			0x694
> +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK		0xff
> +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT		0
> +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK		(0xff << 12)
> +#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT	12
> +
> +#define T_SATA0_CHX_PHY_CTRL2				0x69c
> +#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1		0x23
> +
> +#define T_SATA0_CHX_PHY_CTRL11				0x6d0
> +#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ		(0x2800 << 16)
> +
> +#define FUSE_SATA_CALIB					0x124
> +#define FUSE_SATA_CALIB_MASK				0x3
> +
> +struct sata_pad_calibration {
> +	u8 gen1_tx_amp;
> +	u8 gen1_tx_peak;
> +	u8 gen2_tx_amp;
> +	u8 gen2_tx_peak;
> +};
> +
> +static const struct sata_pad_calibration tegra124_pad_calibration[] = {
> +	{0x18, 0x04, 0x18, 0x0a},
> +	{0x0e, 0x04, 0x14, 0x0a},
> +	{0x0e, 0x07, 0x1a, 0x0e},
> +	{0x14, 0x0e, 0x1a, 0x0e},
> +};
> +
> +struct tegra_ahci_priv {
> +	struct platform_device	   *pdev;
> +	void __iomem		   *sata_regs;
> +	struct reset_control	   *sata_rst;
> +	struct reset_control	   *sata_oob_rst;
> +	struct reset_control	   *sata_cold_rst;
> +	/* Needs special handling, cannot use ahci_platform */
> +	struct clk		   *sata_clk;
> +	struct regulator_bulk_data supplies[5];
> +};
> +
> +static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
> +{
> +	struct tegra_ahci_priv *tegra = hpriv->plat_data;
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
> +				    tegra->supplies);
> +	if (ret)
> +		return ret;
> +
> +	ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
> +						tegra->sata_clk,
> +						tegra->sata_rst);
> +	if (ret)
> +		goto disable_regulators;
> +
> +	reset_control_assert(tegra->sata_oob_rst);
> +	reset_control_assert(tegra->sata_cold_rst);
> +
> +	ret = ahci_platform_enable_resources(hpriv);
> +	if (ret)
> +		goto disable_power;
> +
> +	reset_control_deassert(tegra->sata_cold_rst);
> +	reset_control_deassert(tegra->sata_oob_rst);
> +
> +	return 0;
> +
> +disable_power:
> +	clk_disable_unprepare(tegra->sata_clk);
> +
> +	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
> +
> +disable_regulators:
> +	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
> +
> +	return ret;
> +}
> +
> +static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
> +{
> +	struct tegra_ahci_priv *tegra = hpriv->plat_data;
> +
> +	ahci_platform_disable_resources(hpriv);
> +
> +	reset_control_assert(tegra->sata_rst);
> +	reset_control_assert(tegra->sata_oob_rst);
> +	reset_control_assert(tegra->sata_cold_rst);
> +
> +	clk_disable_unprepare(tegra->sata_clk);
> +	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
> +
> +	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
> +}
> +
> +static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
> +{
> +	struct tegra_ahci_priv *tegra = hpriv->plat_data;
> +	int ret;
> +	unsigned int val;
> +	struct sata_pad_calibration calib;
> +
> +	ret = tegra_ahci_power_on(hpriv);
> +	if (ret) {
> +		dev_err(&tegra->pdev->dev,
> +			"failed to power on AHCI controller: %d\n", ret);
> +		return ret;
> +	}
> +
> +	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
> +	val |= SATA_CONFIGURATION_EN_FPCI;
> +	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
> +
> +	/* Pad calibration */
> +
> +	/* FIXME Always use calibration 0. Change this to read the calibration
> +	 * fuse once the fuse driver has landed. */
> +	val = 0;
> +
> +	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
> +
> +	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
> +
> +	val = readl(tegra->sata_regs +
> +		SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
> +	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
> +	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
> +	val |= calib.gen1_tx_amp <<
> +			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
> +	val |= calib.gen1_tx_peak <<
> +			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
> +	writel(val, tegra->sata_regs + SCFG_OFFSET +
> +		T_SATA0_CHX_PHY_CTRL1_GEN1);
> +
> +	val = readl(tegra->sata_regs +
> +			SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
> +	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
> +	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
> +	val |= calib.gen2_tx_amp <<
> +			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
> +	val |= calib.gen2_tx_peak <<
> +			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
> +	writel(val, tegra->sata_regs + SCFG_OFFSET +
> +		T_SATA0_CHX_PHY_CTRL1_GEN2);
> +
> +	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
> +		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
> +	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
> +		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
> +
> +	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
> +
> +	/* Program controller device ID */
> +
> +	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
> +	val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
> +	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
> +
> +	writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
> +
> +	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
> +	val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
> +	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
> +
> +	/* Enable IO & memory access, bus master mode */
> +
> +	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
> +	val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
> +		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
> +	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
> +
> +	/* Program SATA MMIO */
> +
> +	writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
> +	       tegra->sata_regs + SATA_FPCI_BAR5);
> +
> +	writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
> +	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
> +
> +	/* Unmask SATA interrupts */
> +
> +	val = readl(tegra->sata_regs + SATA_INTR_MASK);
> +	val |= SATA_INTR_MASK_IP_INT_MASK;
> +	writel(val, tegra->sata_regs + SATA_INTR_MASK);
> +
> +	return 0;
> +}
> +
> +static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv)
> +{
> +	tegra_ahci_power_off(hpriv);
> +}
> +
> +static void tegra_ahci_host_stop(struct ata_host *host)
> +{
> +	struct ahci_host_priv *hpriv = host->private_data;
> +
> +	tegra_ahci_controller_deinit(hpriv);
> +}
> +
> +static struct ata_port_operations ahci_tegra_port_ops = {
> +	.inherits	= &ahci_ops,
> +	.host_stop	= tegra_ahci_host_stop,
> +};
> +
> +static const struct ata_port_info ahci_tegra_port_info = {
> +	.flags		= AHCI_FLAG_COMMON,
> +	.pio_mask	= ATA_PIO4,
> +	.udma_mask	= ATA_UDMA6,
> +	.port_ops	= &ahci_tegra_port_ops,
> +};
> +
> +static const struct of_device_id tegra_ahci_of_match[] = {
> +	{ .compatible = "nvidia,tegra124-ahci" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
> +
> +static int tegra_ahci_probe(struct platform_device *pdev)
> +{
> +	struct ahci_host_priv *hpriv;
> +	struct tegra_ahci_priv *tegra;
> +	struct resource *res;
> +	int ret;
> +
> +	hpriv = ahci_platform_get_resources(pdev);
> +	if (IS_ERR(hpriv))
> +		return PTR_ERR(hpriv);
> +
> +	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
> +	if (!tegra)
> +		return -ENOMEM;
> +
> +	hpriv->plat_data = tegra;
> +
> +	tegra->pdev = pdev;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(tegra->sata_regs))
> +		return PTR_ERR(tegra->sata_regs);
> +
> +	tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
> +	if (IS_ERR(tegra->sata_rst)) {
> +		dev_err(&pdev->dev, "Failed to get sata reset\n");
> +		return PTR_ERR(tegra->sata_rst);
> +	}
> +
> +	tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
> +	if (IS_ERR(tegra->sata_oob_rst)) {
> +		dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
> +		return PTR_ERR(tegra->sata_oob_rst);
> +	}
> +
> +	tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
> +	if (IS_ERR(tegra->sata_cold_rst)) {
> +		dev_err(&pdev->dev, "Failed to get sata-cold reset\n");
> +		return PTR_ERR(tegra->sata_cold_rst);
> +	}
> +
> +	tegra->sata_clk = devm_clk_get(&pdev->dev, "sata");
> +	if (IS_ERR(tegra->sata_clk)) {
> +		dev_err(&pdev->dev, "Failed to get sata clock\n");
> +		return PTR_ERR(tegra->sata_clk);
> +	}
> +
> +	tegra->supplies[0].supply = "avdd";
> +	tegra->supplies[1].supply = "hvdd";
> +	tegra->supplies[2].supply = "vddio";
> +	tegra->supplies[3].supply = "target-5v";
> +	tegra->supplies[4].supply = "target-12v";
> +
> +	ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
> +				      tegra->supplies);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to get regulators\n");
> +		return ret;
> +	}
> +
> +	ret = tegra_ahci_controller_init(hpriv);
> +	if (ret)
> +		return ret;
> +
> +	ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info,
> +				      0, 0, 0);
> +	if (ret)
> +		goto deinit_controller;
> +
> +	return 0;
> +
> +deinit_controller:
> +	tegra_ahci_controller_deinit(hpriv);
> +
> +	return ret;
> +};
> +
> +static struct platform_driver tegra_ahci_driver = {
> +	.probe = tegra_ahci_probe,
> +	.remove = ata_platform_remove_one,
> +	.driver = {
> +		.name = "tegra-ahci",
> +		.of_match_table = tegra_ahci_of_match,
> +	},
> +	/* LP0 suspend support not implemented */
> +};
> +module_platform_driver(tegra_ahci_driver);
> +
> +MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
> +MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
> +MODULE_LICENSE("GPL v2");
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Thanks!

- Mikko

On 18/07/14 13:26, Hans de Goede wrote:
> Hi,
>
> On 07/18/2014 09:12 AM, Mikko Perttunen wrote:
>> This adds support for the integrated AHCI-compliant Serial ATA
>> controller present on the NVIDIA Tegra124 system-on-chip.
>>
>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
>> ---
>> v5: let ahci_platform handle sata clock and also handle it ourselves.
>>    this allows use of ahci_platform while having a special sequence
>>    for the clock.
>
> Thanks, I like this one, much better then what we had before.
>
> Acked-by: Hans de Goede <hdegoede@redhat.com>
>
> Regards,
>
> Hans
>
>
>
 >> ...

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html