diff mbox

ARM: tegra: add Tegra Note 7 device tree

Message ID 1398928217-32629-1-git-send-email-acourbot@nvidia.com
State Superseded, archived
Headers show

Commit Message

Alexandre Courbot May 1, 2014, 7:10 a.m. UTC 
Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM
and a 720p panel.

The following features are enabled by this device tree: UART, eMMC, USB
(needs external power), PMIC, backlight, DSI panel, keys.

SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not
yet supported but might be by future patches (likely in that order).

Touch panel, sensors & cameras will probably never be supported.

Pinctrl is not set yet, as the bootloader-provided values allow us to
use the currently supported hardware.

A default kernel command-line as well as initrd addresses are hardcoded
to match the static values the bootloader is known to use. This allows
booting from an appended DTB without having to alter it at boot time,
since the bootloader has no Device Tree support.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[treding@nvidia.com: DT fixes, DSI panel support]
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
DT for SHIELD (roth) is to follow, but I would like to get all reviews on
this one first and apply them to SHIELD for a (hopefully) smooth submission.

SD card not working yet is quite weird. I am investigating this as well as
HDMI, but would like to get this DT secured for 3.16 first and send the
rest as incremental follow-up patches.

Thanks!

 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/tegra114-tn7.dts | 390 +++++++++++++++++++++++++++++++++++++
 2 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra114-tn7.dts

Comments

Stephen Warren May 1, 2014, 5:33 p.m. UTC | #1 
On 05/01/2014 01:10 AM, Alexandre Courbot wrote:
> Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM
> and a 720p panel.
> 
> The following features are enabled by this device tree: UART, eMMC, USB
> (needs external power), PMIC, backlight, DSI panel, keys.
> 
> SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not
> yet supported but might be by future patches (likely in that order).

> diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts

> +	chosen {
> +		/* TN7's bootloader's arguments need to be overridden */
> +		bootargs = "console=ttyS0,115200n8 console=tty1 gpt cma=128M fbcon=rotate:2";

Do we still need the cma argument at all now? The default is now 64M in
tegra_defconfig, and 128M seems quite large.

> +	host1x@50000000 {
> +		hdmi@54280000 {
> +			status = "okay";
> +
> +			hdmi-supply = <&vdd_5v0_hdmi>;
> +			vdd-supply = <&vdd_3v3_hdmi>;
> +			pll-supply = <&vdd_1v05_pll>;
> +
> +			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
> +			nvidia,hpd-gpio =
> +				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
> +		};

If HDMI doesn't work yet (per commit description), should we leave it
out of the DT for now?

> +	serial@70006300 {
> +		status = "okay";
> +	};

Is there actually an accessible UART on the board? I guess this is for
people lucky enough to have internal boards with the debug connector. If
so, this is probably fine.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alexandre Courbot May 2, 2014, 5:37 a.m. UTC | #2 
On Fri, May 2, 2014 at 2:33 AM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 05/01/2014 01:10 AM, Alexandre Courbot wrote:
>> Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM
>> and a 720p panel.
>>
>> The following features are enabled by this device tree: UART, eMMC, USB
>> (needs external power), PMIC, backlight, DSI panel, keys.
>>
>> SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not
>> yet supported but might be by future patches (likely in that order).
>
>> diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
>
>> +     chosen {
>> +             /* TN7's bootloader's arguments need to be overridden */
>> +             bootargs = "console=ttyS0,115200n8 console=tty1 gpt cma=128M fbcon=rotate:2";
>
> Do we still need the cma argument at all now? The default is now 64M in
> tegra_defconfig, and 128M seems quite large.

I have omitted that parameter and my TN7 seems to be happy about it,
so removed as you suggested.

>
>> +     host1x@50000000 {
>> +             hdmi@54280000 {
>> +                     status = "okay";
>> +
>> +                     hdmi-supply = <&vdd_5v0_hdmi>;
>> +                     vdd-supply = <&vdd_3v3_hdmi>;
>> +                     pll-supply = <&vdd_1v05_pll>;
>> +
>> +                     nvidia,ddc-i2c-bus = <&hdmi_ddc>;
>> +                     nvidia,hpd-gpio =
>> +                             <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
>> +             };
>
> If HDMI doesn't work yet (per commit description), should we leave it
> out of the DT for now?

Indeed.

>
>> +     serial@70006300 {
>> +             status = "okay";
>> +     };
>
> Is there actually an accessible UART on the board? I guess this is for
> people lucky enough to have internal boards with the debug connector. If
> so, this is probably fine.

Yes, you need to rework your tablet to get access to a serial line. It
is possible though, and as you mentioned the dev boards we use
internally have this rework already which makes debugging much easier.
I'd keep that one if you don't mind.

Thanks,
Alex.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 49717b2db19a..fb662207a504 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -369,6 +369,7 @@  dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
+	tegra114-tn7.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
new file mode 100644
index 000000000000..065d88759291
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -0,0 +1,390 @@ 
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt cma=128M fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_1v05_pll>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v05_pll: ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_hdmi: ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* FIXME: output of BQ24192 */
+		vs_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VS_SYS";
+			regulator-min-microvolt = <4200000>;
+			regulator-max-microvolt = <4200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lcd_bl_en: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_LCD_BL";
+			regulator-min-microvolt = <16500000>;
+			regulator-max-microvolt = <16500000>;
+			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vs_sys>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VD_LCD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_hdmi: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "VDD_5V_HDMI_CONN";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_smps10_out1>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};