| Message ID | 1373439643-16633-1-git-send-email-ldewangan@nvidia.com |
|---|---|
| State | Accepted, archived |
| Headers | show |
On 07/10/2013 01:00 AM, Laxman Dewangan wrote: > Dalmore have the keys mounted on board which are connected > to different pins of Tegra. > > Add the keys entry in DTS file to enable key functionality. > This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and > KEY_VOLUMEDOWN. I have applied this to Tegra's for-3.12/dt branch. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index cb640eb..a42bfa4 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -883,6 +883,35 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + linux,code = <102>; /* KEY_HOME */ + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>;
Dalmore have the keys mounted on board which are connected to different pins of Tegra. Add the keys entry in DTS file to enable key functionality. This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and KEY_VOLUMEDOWN. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> --- Changes from V1: - Reorder the nodes Changes from V2: - Remove unwanted line insertion. - Rename VolumeUP/Volume down lables. arch/arm/boot/dts/tegra114-dalmore.dts | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+), 0 deletions(-)