diff mbox

[v2,5/6] ARM: tegra: USB_ULPI needs USB

Message ID 1330721919-8800-1-git-send-email-alan@signal11.us
State Superseded, archived
Headers show

Commit Message

Alan Ott March 2, 2012, 8:58 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

The USB_ULPI driver is selected by tegra, but can only be
built if at least one of USB or USB_GADGET is enabled.
The kernel fails to link if both are off.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Ott <alan@signal11.us>
---
 arch/arm/mach-tegra/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

Comments

Olof Johansson March 4, 2012, 6:40 p.m. UTC | #1 
On Fri, Mar 02, 2012 at 03:58:39PM -0500, Alan Ott wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The USB_ULPI driver is selected by tegra, but can only be
> built if at least one of USB or USB_GADGET is enabled.
> The kernel fails to link if both are off.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Alan Ott <alan@signal11.us>
> ---
>  arch/arm/mach-tegra/Kconfig |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index 60f3e4b..9bb8a37 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -10,6 +10,7 @@ config ARCH_TEGRA_2x_SOC
>  	select USB_ARCH_HAS_EHCI if USB_SUPPORT
>  	select USB_ULPI if USB_SUPPORT
>  	select USB_ULPI_VIEWPORT if USB_SUPPORT
> +	select USB_GADGET if USB_SUPPORT && !USB
>  	select CPU_FREQ_TABLE if CPU_FREQ
>  	help
>  	  Support for NVIDIA Tegra AP20 and T20 processors, based on the

This is another patch that needs the same change for T30.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alan Ott March 4, 2012, 7:46 p.m. UTC | #2 
On 3/4/12 1:40 PM, Olof Johansson wrote:
> On Fri, Mar 02, 2012 at 03:58:39PM -0500, Alan Ott wrote:
>> From: Arnd Bergmann<arnd@arndb.de>
>>
>> The USB_ULPI driver is selected by tegra, but can only be
>> built if at least one of USB or USB_GADGET is enabled.
>> The kernel fails to link if both are off.
>>
>> Signed-off-by: Arnd Bergmann<arnd@arndb.de>
>> Signed-off-by: Alan Ott<alan@signal11.us>
>> ---
> This is another patch that needs the same change for T30.
>
>
> -Olof

It is in v3. It looks like you took (or at least replied to) v2 for all 
these.

Alan.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 60f3e4b..9bb8a37 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,7 @@  config ARCH_TEGRA_2x_SOC
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_SUPPORT
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
+	select USB_GADGET if USB_SUPPORT && !USB
 	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the