| Message ID | 20221128152336.133953-1-luca.ceresoli@bootlin.com |
|---|---|
| Headers | show |
| Series | Add Tegra20 parallel video input capture | expand |
28.11.2022 18:23, Luca Ceresoli пишет: > Tegra20 and other Tegra SoCs have a video input (VI) peripheral that can > receive from either MIPI CSI-2 or parallel video (called respectively "CSI" > and "VIP" in the documentation). The kernel currently has a staging driver > for Tegra210 CSI capture. This patch set adds support for Tegra20 VIP > capture. > > Unfortunately I had no real documentation available to base this work on. > I only had a working downstream 3.1 kernel, so I started with the driver > found there and heavily reworked it to fit into the mainline tegra-video > driver structure. The existing code appears written with the intent of > being modular and allow adding new input mechanisms and new SoCs while > keeping a unique VI core module. However its modularity and extensibility > was not enough to add Tegra20 VIP support, so I added some hooks to turn > hard-coded behaviour into per-SoC or per-bus customizable code. There are > also a fix, some generic cleanups and DT bindings. > > Quick tour of the patches: > > * Device tree bindings and minor DTS improvements > > 01. dt-bindings: display: tegra: add Tegra20 VIP > 02. dt-bindings: display: tegra: vi: add 'vip' property and example This series adds the new DT node, but there are no board DTs in upstream that will use VIP? Will we see the board patches? In any case, given that you're likely the only one here who has access to hardware with VIP, you should promote yourself to the tegra-video driver maintainers and confirm that you will be able to maintain and test this code for years to come.
Hello Dmitry, thanks for your review. On Tue, 20 Dec 2022 23:21:49 +0300 Dmitry Osipenko <digetx@gmail.com> wrote: > 28.11.2022 18:23, Luca Ceresoli пишет: > > Tegra20 and other Tegra SoCs have a video input (VI) peripheral that can > > receive from either MIPI CSI-2 or parallel video (called respectively "CSI" > > and "VIP" in the documentation). The kernel currently has a staging driver > > for Tegra210 CSI capture. This patch set adds support for Tegra20 VIP > > capture. > > > > Unfortunately I had no real documentation available to base this work on. > > I only had a working downstream 3.1 kernel, so I started with the driver > > found there and heavily reworked it to fit into the mainline tegra-video > > driver structure. The existing code appears written with the intent of > > being modular and allow adding new input mechanisms and new SoCs while > > keeping a unique VI core module. However its modularity and extensibility > > was not enough to add Tegra20 VIP support, so I added some hooks to turn > > hard-coded behaviour into per-SoC or per-bus customizable code. There are > > also a fix, some generic cleanups and DT bindings. > > > > Quick tour of the patches: > > > > * Device tree bindings and minor DTS improvements > > > > 01. dt-bindings: display: tegra: add Tegra20 VIP > > 02. dt-bindings: display: tegra: vi: add 'vip' property and example > > This series adds the new DT node, but there are no board DTs in upstream > that will use VIP? Will we see the board patches? I'm afraid I have no such plan. I don't have any public hardware with Tegra20, with or without a parallel sensor. I have a custom board. > In any case, given that you're likely the only one here who has access > to hardware with VIP, Likely indeed. > you should promote yourself to the tegra-video > driver maintainers and confirm that you will be able to maintain and > test this code for years to come. I can definitely add myself as a maintainer of this driver and join the maintenance effort, I'm adding that in v3. I also have a board that I can permanently use for testing.
Tegra20 and other Tegra SoCs have a video input (VI) peripheral that can receive from either MIPI CSI-2 or parallel video (called respectively "CSI" and "VIP" in the documentation). The kernel currently has a staging driver for Tegra210 CSI capture. This patch set adds support for Tegra20 VIP capture. Unfortunately I had no real documentation available to base this work on. I only had a working downstream 3.1 kernel, so I started with the driver found there and heavily reworked it to fit into the mainline tegra-video driver structure. The existing code appears written with the intent of being modular and allow adding new input mechanisms and new SoCs while keeping a unique VI core module. However its modularity and extensibility was not enough to add Tegra20 VIP support, so I added some hooks to turn hard-coded behaviour into per-SoC or per-bus customizable code. There are also a fix, some generic cleanups and DT bindings. Quick tour of the patches: * Device tree bindings and minor DTS improvements 01. dt-bindings: display: tegra: add Tegra20 VIP 02. dt-bindings: display: tegra: vi: add 'vip' property and example * A fix 03. staging: media: tegra-video: fix .vidioc_enum_fmt_vid_cap to return all formats * Minor improvements to logging, comments, cleanups 04. staging: media: tegra-video: improve documentation of tegra_video_format fields 05. staging: media: tegra-video: document tegra_channel_get_remote_source_subdev 06. staging: media: tegra-video: fix typos in comment 07. staging: media: tegra-video: improve error messages 08. staging: media: tegra-video: slightly simplify cleanup on errors 09. staging: media: tegra-video: move private struct declaration to C file 10. staging: media: tegra-video: remove unneeded include * Preparation to make the VI module generic enough to host Tegra20 and VIP 11. staging: media: tegra-video: Kconfig: allow TPG only on Tegra210 12. staging: media: tegra-video: move tegra_channel_fmt_align to a per-soc op 13. staging: media: tegra-video: move default format to soc-specific data 14. staging: media: tegra-video: move MIPI calibration calls from VI to CSI 15. staging: media: tegra-video: add a per-soc enable/disable op 16. staging: media: tegra-video: move syncpt init/free to a per-soc op 17. staging: media: tegra-video: add syncpts for Tegra20 to struct tegra_vi 18. staging: media: tegra-video: add hooks for planar YUV and H/V flip 19. staging: media: tegra-video: add H/V flip controls * Implementation of VIP and Tegra20 20. staging: media: tegra-video: add support for VIP (parallel video input) 21. staging: media: tegra-video: add tegra20 variant Enjoy! Changed in v2: - improved dt-bindings patches based on reviews - removed patches 3 and 4 adding DT labels without a mainline user - two small fixes to the last patch [v1] https://lore.kernel.org/linux-tegra/20221124155634.5bc2a423@booty/T/#t Luca Luca Ceresoli (21): dt-bindings: display: tegra: add Tegra20 VIP dt-bindings: display: tegra: vi: add 'vip' property and example staging: media: tegra-video: fix .vidioc_enum_fmt_vid_cap to return all formats staging: media: tegra-video: improve documentation of tegra_video_format fields staging: media: tegra-video: document tegra_channel_get_remote_source_subdev staging: media: tegra-video: fix typos in comment staging: media: tegra-video: improve error messages staging: media: tegra-video: slightly simplify cleanup on errors staging: media: tegra-video: move private struct declaration to C file staging: media: tegra-video: remove unneeded include staging: media: tegra-video: Kconfig: allow TPG only on Tegra210 staging: media: tegra-video: move tegra_channel_fmt_align to a per-soc op staging: media: tegra-video: move default format to soc-specific data staging: media: tegra-video: move MIPI calibration calls from VI to CSI staging: media: tegra-video: add a per-soc enable/disable op staging: media: tegra-video: move syncpt init/free to a per-soc op staging: media: tegra-video: add syncpts for Tegra20 to struct tegra_vi staging: media: tegra-video: add hooks for planar YUV and H/V flip staging: media: tegra-video: add H/V flip controls staging: media: tegra-video: add support for VIP (parallel video input) staging: media: tegra-video: add tegra20 variant .../display/tegra/nvidia,tegra20-vi.yaml | 68 ++ .../display/tegra/nvidia,tegra20-vip.yaml | 63 ++ MAINTAINERS | 10 + drivers/staging/media/tegra-video/Kconfig | 1 + drivers/staging/media/tegra-video/Makefile | 2 + drivers/staging/media/tegra-video/csi.c | 44 ++ drivers/staging/media/tegra-video/tegra20.c | 661 ++++++++++++++++++ drivers/staging/media/tegra-video/tegra210.c | 97 ++- drivers/staging/media/tegra-video/vi.c | 321 ++------- drivers/staging/media/tegra-video/vi.h | 76 +- drivers/staging/media/tegra-video/video.c | 5 + drivers/staging/media/tegra-video/video.h | 2 +- drivers/staging/media/tegra-video/vip.c | 298 ++++++++ drivers/staging/media/tegra-video/vip.h | 72 ++ 14 files changed, 1434 insertions(+), 286 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml create mode 100644 drivers/staging/media/tegra-video/tegra20.c create mode 100644 drivers/staging/media/tegra-video/vip.c create mode 100644 drivers/staging/media/tegra-video/vip.h