diff mbox series

[RFC,4/6] arm64: dts: armada-cp11x: add pwm support to GPIO blocks

Message ID E1jIVUK-0005hJ-33@rmk-PC.armlinux.org.uk
State Not Applicable
Headers show
Series PWM fan support on Clearfog gt8k | expand

Commit Message

Russell King (Oracle) March 29, 2020, 10:48 a.m. UTC 
Add PWM support to the GPIO blocks.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 024073edfc1c..dfd251acc194 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -311,6 +311,7 @@ 
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
 				interrupt-controller;
 				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
@@ -319,6 +320,8 @@ 
 					<83 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
 				status = "disabled";
+				clock-names = "core";
+				clocks = <&CP11X_LABEL(clk) 1 21>;
 			};
 
 			CP11X_LABEL(gpio2): gpio@140 {
@@ -327,6 +330,7 @@ 
 				ngpios = <31>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
 				interrupt-controller;
 				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
@@ -335,6 +339,8 @@ 
 					<79 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
 				status = "disabled";
+				clock-names = "core";
+				clocks = <&CP11X_LABEL(clk) 1 21>;
 			};
 		};