diff mbox series

[v17,7/9] arm64: dts: qcom: ipq5018: add pwm node

Message ID 20251008-ipq-pwm-v17-7-9bd43edfc7f7@outlook.com
State Superseded
Headers show
Series Add PWM support for IPQ chipsets | expand

Commit Message

George Moussalem via B4 Relay Oct. 8, 2025, 3:32 p.m. UTC 
From: George Moussalem <george.moussalem@outlook.com>

Describe the PWM block on IPQ5018.

Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index f024b3cba33f6100ac3f4d45598ff2356e026dcf..d4bdf2884aa7f73711cf8a37b7a4c4e7e54c503c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -453,6 +453,16 @@  tcsr: syscon@1937000 {
 			reg = <0x01937000 0x21000>;
 		};
 
+		pwm: pwm@1941010 {
+			compatible = "qcom,ipq5018-pwm", "qcom,ipq6018-pwm";
+			reg = <0x01941010 0x20>;
+			clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			assigned-clock-rates = <100000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;