Message ID | 20241024085922.133071-9-tmyu0@nuvoton.com |
---|---|
State | Changes Requested |
Headers | show |
Series | Add Nuvoton NCT6694 MFD devices | expand |
Hello, On Thu, Oct 24, 2024 at 04:59:21PM +0800, Ming Yu wrote: > This driver supports PWM functionality for NCT6694 MFD device > based on USB interface. > > Signed-off-by: Ming Yu <tmyu0@nuvoton.com> > --- > MAINTAINERS | 1 + > drivers/pwm/Kconfig | 10 ++ > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-nct6694.c | 245 ++++++++++++++++++++++++++++++++++++++ > 4 files changed, 257 insertions(+) > create mode 100644 drivers/pwm/pwm-nct6694.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 5c350eac187d..4d5a5eded3b9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -16444,6 +16444,7 @@ F: drivers/iio/adc/nct6694_adc.c > F: drivers/i2c/busses/i2c-nct6694.c > F: drivers/mfd/nct6694.c > F: drivers/net/can/nct6694_canfd.c > +F: drivers/pwm/pwm-nct6694.c > F: drivers/watchdog/nct6694_wdt.c > F: include/linux/mfd/nct6694.h > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig > index 0915c1e7df16..00b5eb13f99d 100644 > --- a/drivers/pwm/Kconfig > +++ b/drivers/pwm/Kconfig > @@ -471,6 +471,16 @@ config PWM_NTXEC > controller found in certain e-book readers designed by the original > design manufacturer Netronix. > > +config PWM_NCT6694 > + tristate "Nuvoton NCT6694 PWM support" > + depends on MFD_NCT6694 > + help > + If you say yes to this option, support will be included for Nuvoton > + NCT6694, a USB device to PWM controller. > + > + This driver can also be built as a module. If so, the module > + will be called pwm-nct6694. > + > config PWM_OMAP_DMTIMER > tristate "OMAP Dual-Mode Timer PWM support" > depends on OF > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile > index 9081e0c0e9e0..5c5602b79402 100644 > --- a/drivers/pwm/Makefile > +++ b/drivers/pwm/Makefile > @@ -42,6 +42,7 @@ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o > obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o > obj-$(CONFIG_PWM_MXS) += pwm-mxs.o > obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o > +obj-$(CONFIG_PWM_NCT6694) += pwm-nct6694.o > obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o > obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o > obj-$(CONFIG_PWM_PXA) += pwm-pxa.o > diff --git a/drivers/pwm/pwm-nct6694.c b/drivers/pwm/pwm-nct6694.c > new file mode 100644 > index 000000000000..915a2ab50834 > --- /dev/null > +++ b/drivers/pwm/pwm-nct6694.c > @@ -0,0 +1,245 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Nuvoton NCT6694 PWM driver based on USB interface. > + * > + * Copyright (C) 2024 Nuvoton Technology Corp. > + */ > + > +#include <linux/slab.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/pwm.h> > +#include <linux/platform_device.h> > +#include <linux/mfd/nct6694.h> > + > +#define DRVNAME "nct6694-pwm" > + > +#define NR_PWM 10 > +#define MAX_PERIOD_NS 40000 /* PWM Maximum Frequency = 25kHz */ Please use a prefix for your defines, otherwise they make a more general impression than justified. > +#define PERIOD_NS_CONST 10200000 /* Period_ns to Freq_reg */ What is Freq_reg? > +/* Host interface */ > +#define REQUEST_RPT_MOD 0xFF > +#define REQUEST_HWMON_MOD 0x00 > +#define REQUEST_PWM_MOD 0x01 > + > +/* Report Channel */ > +#define HWMON_PWM_IDX(x) (0x70 + (x)) > + > +/* Message Channel -HWMON */ > +/* Command 00h */ > +#define REQUEST_HWMON_CMD0_LEN 0x40 > +#define REQUEST_HWMON_CMD0_OFFSET 0x0000 /* OFFSET = SEL|CMD */ > +#define HWMON_PWM_EN(x) (0x06 + (x)) > +#define HWMON_PWM_PP(x) (0x08 + (x)) > +#define HWMON_PWM_FREQ_IDX(x) (0x30 + (x)) > + > +/* Message Channel -FAN */ > +/* Command 00h */ > +#define REQUEST_PWM_CMD0_LEN 0x08 > +#define REQUEST_PWM_CMD0_OFFSET 0x0000 /* OFFSET = SEL|CMD */ > +#define PWM_CH_EN(x) (x ? 0x00 : 0x01) > +/* Command 01h */ > +#define REQUEST_PWM_CMD1_LEN 0x20 > +#define REQUEST_PWM_CMD1_OFFSET 0x0001 /* OFFSET = SEL|CMD */ > +#define PWM_MAL_EN(x) (x ? 0x00 : 0x01) > +#define PWM_MAL_VAL(x) (0x02 + (x)) > + > +/* > + * Frequency <-> Period > + * (10^9 * 255) / (25000 * Freq_reg) = Period_ns > + * 10200000 / Freq_reg = Period_ns > + * > + * | Freq_reg | Freq_Hz | Period_ns | > + * | 1 (01h | 98.039 | 10200000 | missing ) > + * | 2 (02h) | 196.078 | 5100000 | > + * | 3 (03h) | 294.117 | 3400000 | > + * | ... | > + * | ... | > + * | ... | Better use spaces for indention here. > + * | 253 (FDh)| 24803.9 | 40316.20 | > + * | 254 (FEh)| 24901.9 | 40157.48 | > + * | 255 (FFh)| 25000 | 40000 | Is this table useful? I'd just write: The emitted period P depends on the value F configured in the freq register: P = 255 s / (25000 * F) = 10200000 ns / F I wonder what happens if F == 0? > + */ > + > +struct nct6694_pwm_data { > + struct nct6694 *nct6694; > + unsigned char hwmon_cmd0_buf[REQUEST_HWMON_CMD0_LEN]; > + unsigned char pwm_cmd0_buf[REQUEST_PWM_CMD0_LEN]; > + unsigned char pwm_cmd1_buf[REQUEST_PWM_CMD1_LEN]; What are these arrays? register caches? > +}; > + > +static inline struct nct6694_pwm_data *to_nct6694_pwm_data(struct pwm_chip *chip) > +{ > + return pwmchip_get_drvdata(chip); > +} > + > +static int nct6694_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) > +{ > + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); > + unsigned char ch_enable = data->pwm_cmd0_buf[PWM_CH_EN(pwm->hwpwm / 8)]; > + unsigned char mal_enable = data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)]; > + bool ch_en = ch_enable & BIT(pwm->hwpwm % 8); > + bool mal_en = mal_enable & BIT(pwm->hwpwm % 8); What is "mal"? > + > + if (!(ch_en && mal_en)) { > + pr_err("%s: PWM(%d) is running in other mode!\n", > + __func__, pwm->hwpwm); > + return -EINVAL; > + } No error messages after .probe() please. dev_dbg() is fine however. > + return 0; > +} > + > +static int nct6694_pwm_get_state(struct pwm_chip *chip, > + struct pwm_device *pwm, > + struct pwm_state *state) > +{ > + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); > + unsigned char freq_reg, duty; > + > + /* Get pwm device initial state */ > + state->enabled = true; > + > + freq_reg = data->hwmon_cmd0_buf[HWMON_PWM_FREQ_IDX(pwm->hwpwm)]; > + state->period = PERIOD_NS_CONST / freq_reg; I doubt you extensively tested your driver with PWM_DEBUG enabled. Hint: You should probably use DIV_ROUND_UP here. > + duty = data->pwm_cmd1_buf[PWM_MAL_VAL(pwm->hwpwm)]; > + state->duty_cycle = duty * state->period / 0xFF; > + > + return 0; > +} > + > +static int nct6694_pwm_apply(struct pwm_chip *chip, > + struct pwm_device *pwm, > + const struct pwm_state *state) > +{ > + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); > + unsigned char freq_reg, duty; > + int ret; > + > + if (state->period < MAX_PERIOD_NS) > + return -EINVAL; > + > + /* (10^9 * 255) / (25000 * Freq_reg) = Period_ns */ This could be less irritating if the formula included units. See above. > + freq_reg = (unsigned char)(PERIOD_NS_CONST / state->period); No need for the cast. If state->period is bigger than PERIOD_NS_CONST, freq_reg ends up being zero. That's related to the question above about F == 0. > + data->hwmon_cmd0_buf[HWMON_PWM_FREQ_IDX(pwm->hwpwm)] = freq_reg; > + ret = nct6694_write_msg(data->nct6694, REQUEST_HWMON_MOD, > + REQUEST_HWMON_CMD0_OFFSET, > + REQUEST_HWMON_CMD0_LEN, > + data->hwmon_cmd0_buf); > + if (ret) > + return -EIO; return ret;? > + > + /* Duty = duty * 0xFF */ I don't understand that. > + duty = (unsigned char)(state->duty_cycle * 0xFF / state->period); Please use the actual period implemented and not state->period. > + data->pwm_cmd1_buf[PWM_MAL_VAL(pwm->hwpwm)] = duty; > + if (state->enabled) > + data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)] |= BIT(pwm->hwpwm % 8); > + else > + data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)] &= ~BIT(pwm->hwpwm % 8); s/ / / > + ret = nct6694_write_msg(data->nct6694, REQUEST_PWM_MOD, > + REQUEST_PWM_CMD1_OFFSET, REQUEST_PWM_CMD1_LEN, > + data->pwm_cmd1_buf); > + if (ret) > + return -EIO; return ret; > + return 0; > +} > + > +static const struct pwm_ops nct6694_pwm_ops = { > + .request = nct6694_pwm_request, > + .apply = nct6694_pwm_apply, > + .get_state = nct6694_pwm_get_state, > +}; > + > +static int nct6694_pwm_init(struct nct6694_pwm_data *data) > +{ > + struct nct6694 *nct6694 = data->nct6694; > + int ret; > + > + ret = nct6694_read_msg(nct6694, REQUEST_HWMON_MOD, > + REQUEST_HWMON_CMD0_OFFSET, > + REQUEST_HWMON_CMD0_LEN, 0, > + REQUEST_HWMON_CMD0_LEN, > + data->hwmon_cmd0_buf); > + if (ret) > + return ret; > + > + ret = nct6694_read_msg(nct6694, REQUEST_PWM_MOD, > + REQUEST_PWM_CMD0_OFFSET, > + REQUEST_PWM_CMD0_LEN, 0, > + REQUEST_PWM_CMD0_LEN, > + data->pwm_cmd0_buf); > + if (ret) > + return ret; > + > + ret = nct6694_read_msg(nct6694, REQUEST_PWM_MOD, > + REQUEST_PWM_CMD1_OFFSET, > + REQUEST_PWM_CMD1_LEN, 0, > + REQUEST_PWM_CMD1_LEN, > + data->pwm_cmd1_buf); > + return ret; > +} > + > +static int nct6694_pwm_probe(struct platform_device *pdev) > +{ > + struct pwm_chip *chip; > + struct nct6694_pwm_data *data; > + struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent); > + int ret; > + > + chip = devm_pwmchip_alloc(&pdev->dev, NR_PWM, sizeof(*data)); > + if (IS_ERR(chip)) > + return PTR_ERR(chip); > + > + data = to_nct6694_pwm_data(chip); > + > + data->nct6694 = nct6694; > + chip->ops = &nct6694_pwm_ops; > + > + ret = nct6694_pwm_init(data); > + if (ret) > + return -EIO; return dev_err_probe(dev, ret, "....\n"); > + /* Register pwm device to PWM framework */ > + ret = devm_pwmchip_add(&pdev->dev, chip); > + if (ret) { > + dev_err(&pdev->dev, "Failed to register pwm device!\n"); > + return ret; > + } Please use dev_err_probe(). > + > + return 0; > +} > + > +static struct platform_driver nct6694_pwm_driver = { > + .driver = { > + .name = DRVNAME, DRVNAME is only used once (and a too generic name). Please just put the string here directly. > + }, > + .probe = nct6694_pwm_probe, > +}; I don't like your aligning choices. Why do you intend the = for .probe but not for .driver? My preferred style is a single space before the =. While aligning the = is a subjective choice, a relevant downside is that if later a longer member should get initialized you have to realign all the otherwise unaffected lines to restore the alignment. > +static int __init nct6694_init(void) > +{ > + int err; > + > + err = platform_driver_register(&nct6694_pwm_driver); > + if (!err) { > + if (err) Huh? > + platform_driver_unregister(&nct6694_pwm_driver); > + } > + > + return err; > +} > +subsys_initcall(nct6694_init); Do you really need this to be at subsys init time? > +static void __exit nct6694_exit(void) > +{ > + platform_driver_unregister(&nct6694_pwm_driver); > +} > +module_exit(nct6694_exit); > + > +MODULE_DESCRIPTION("USB-PWM driver for NCT6694"); > +MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>"); > +MODULE_LICENSE("GPL"); Best regards Uwe
diff --git a/MAINTAINERS b/MAINTAINERS index 5c350eac187d..4d5a5eded3b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16444,6 +16444,7 @@ F: drivers/iio/adc/nct6694_adc.c F: drivers/i2c/busses/i2c-nct6694.c F: drivers/mfd/nct6694.c F: drivers/net/can/nct6694_canfd.c +F: drivers/pwm/pwm-nct6694.c F: drivers/watchdog/nct6694_wdt.c F: include/linux/mfd/nct6694.h diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 0915c1e7df16..00b5eb13f99d 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -471,6 +471,16 @@ config PWM_NTXEC controller found in certain e-book readers designed by the original design manufacturer Netronix. +config PWM_NCT6694 + tristate "Nuvoton NCT6694 PWM support" + depends on MFD_NCT6694 + help + If you say yes to this option, support will be included for Nuvoton + NCT6694, a USB device to PWM controller. + + This driver can also be built as a module. If so, the module + will be called pwm-nct6694. + config PWM_OMAP_DMTIMER tristate "OMAP Dual-Mode Timer PWM support" depends on OF diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 9081e0c0e9e0..5c5602b79402 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o obj-$(CONFIG_PWM_MXS) += pwm-mxs.o obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o +obj-$(CONFIG_PWM_NCT6694) += pwm-nct6694.o obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o obj-$(CONFIG_PWM_PXA) += pwm-pxa.o diff --git a/drivers/pwm/pwm-nct6694.c b/drivers/pwm/pwm-nct6694.c new file mode 100644 index 000000000000..915a2ab50834 --- /dev/null +++ b/drivers/pwm/pwm-nct6694.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nuvoton NCT6694 PWM driver based on USB interface. + * + * Copyright (C) 2024 Nuvoton Technology Corp. + */ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pwm.h> +#include <linux/platform_device.h> +#include <linux/mfd/nct6694.h> + +#define DRVNAME "nct6694-pwm" + +#define NR_PWM 10 +#define MAX_PERIOD_NS 40000 /* PWM Maximum Frequency = 25kHz */ +#define PERIOD_NS_CONST 10200000 /* Period_ns to Freq_reg */ + +/* Host interface */ +#define REQUEST_RPT_MOD 0xFF +#define REQUEST_HWMON_MOD 0x00 +#define REQUEST_PWM_MOD 0x01 + +/* Report Channel */ +#define HWMON_PWM_IDX(x) (0x70 + (x)) + +/* Message Channel -HWMON */ +/* Command 00h */ +#define REQUEST_HWMON_CMD0_LEN 0x40 +#define REQUEST_HWMON_CMD0_OFFSET 0x0000 /* OFFSET = SEL|CMD */ +#define HWMON_PWM_EN(x) (0x06 + (x)) +#define HWMON_PWM_PP(x) (0x08 + (x)) +#define HWMON_PWM_FREQ_IDX(x) (0x30 + (x)) + +/* Message Channel -FAN */ +/* Command 00h */ +#define REQUEST_PWM_CMD0_LEN 0x08 +#define REQUEST_PWM_CMD0_OFFSET 0x0000 /* OFFSET = SEL|CMD */ +#define PWM_CH_EN(x) (x ? 0x00 : 0x01) +/* Command 01h */ +#define REQUEST_PWM_CMD1_LEN 0x20 +#define REQUEST_PWM_CMD1_OFFSET 0x0001 /* OFFSET = SEL|CMD */ +#define PWM_MAL_EN(x) (x ? 0x00 : 0x01) +#define PWM_MAL_VAL(x) (0x02 + (x)) + +/* + * Frequency <-> Period + * (10^9 * 255) / (25000 * Freq_reg) = Period_ns + * 10200000 / Freq_reg = Period_ns + * + * | Freq_reg | Freq_Hz | Period_ns | + * | 1 (01h | 98.039 | 10200000 | + * | 2 (02h) | 196.078 | 5100000 | + * | 3 (03h) | 294.117 | 3400000 | + * | ... | + * | ... | + * | ... | + * | 253 (FDh)| 24803.9 | 40316.20 | + * | 254 (FEh)| 24901.9 | 40157.48 | + * | 255 (FFh)| 25000 | 40000 | + * + */ + +struct nct6694_pwm_data { + struct nct6694 *nct6694; + unsigned char hwmon_cmd0_buf[REQUEST_HWMON_CMD0_LEN]; + unsigned char pwm_cmd0_buf[REQUEST_PWM_CMD0_LEN]; + unsigned char pwm_cmd1_buf[REQUEST_PWM_CMD1_LEN]; +}; + +static inline struct nct6694_pwm_data *to_nct6694_pwm_data(struct pwm_chip *chip) +{ + return pwmchip_get_drvdata(chip); +} + +static int nct6694_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); + unsigned char ch_enable = data->pwm_cmd0_buf[PWM_CH_EN(pwm->hwpwm / 8)]; + unsigned char mal_enable = data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)]; + bool ch_en = ch_enable & BIT(pwm->hwpwm % 8); + bool mal_en = mal_enable & BIT(pwm->hwpwm % 8); + + if (!(ch_en && mal_en)) { + pr_err("%s: PWM(%d) is running in other mode!\n", + __func__, pwm->hwpwm); + return -EINVAL; + } + + return 0; +} + +static int nct6694_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); + unsigned char freq_reg, duty; + + /* Get pwm device initial state */ + state->enabled = true; + + freq_reg = data->hwmon_cmd0_buf[HWMON_PWM_FREQ_IDX(pwm->hwpwm)]; + state->period = PERIOD_NS_CONST / freq_reg; + + duty = data->pwm_cmd1_buf[PWM_MAL_VAL(pwm->hwpwm)]; + state->duty_cycle = duty * state->period / 0xFF; + + return 0; +} + +static int nct6694_pwm_apply(struct pwm_chip *chip, + struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct nct6694_pwm_data *data = to_nct6694_pwm_data(chip); + unsigned char freq_reg, duty; + int ret; + + if (state->period < MAX_PERIOD_NS) + return -EINVAL; + + /* (10^9 * 255) / (25000 * Freq_reg) = Period_ns */ + freq_reg = (unsigned char)(PERIOD_NS_CONST / state->period); + data->hwmon_cmd0_buf[HWMON_PWM_FREQ_IDX(pwm->hwpwm)] = freq_reg; + ret = nct6694_write_msg(data->nct6694, REQUEST_HWMON_MOD, + REQUEST_HWMON_CMD0_OFFSET, + REQUEST_HWMON_CMD0_LEN, + data->hwmon_cmd0_buf); + if (ret) + return -EIO; + + /* Duty = duty * 0xFF */ + duty = (unsigned char)(state->duty_cycle * 0xFF / state->period); + data->pwm_cmd1_buf[PWM_MAL_VAL(pwm->hwpwm)] = duty; + if (state->enabled) + data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)] |= BIT(pwm->hwpwm % 8); + else + data->pwm_cmd1_buf[PWM_MAL_EN(pwm->hwpwm / 8)] &= ~BIT(pwm->hwpwm % 8); + ret = nct6694_write_msg(data->nct6694, REQUEST_PWM_MOD, + REQUEST_PWM_CMD1_OFFSET, REQUEST_PWM_CMD1_LEN, + data->pwm_cmd1_buf); + if (ret) + return -EIO; + + return 0; +} + +static const struct pwm_ops nct6694_pwm_ops = { + .request = nct6694_pwm_request, + .apply = nct6694_pwm_apply, + .get_state = nct6694_pwm_get_state, +}; + +static int nct6694_pwm_init(struct nct6694_pwm_data *data) +{ + struct nct6694 *nct6694 = data->nct6694; + int ret; + + ret = nct6694_read_msg(nct6694, REQUEST_HWMON_MOD, + REQUEST_HWMON_CMD0_OFFSET, + REQUEST_HWMON_CMD0_LEN, 0, + REQUEST_HWMON_CMD0_LEN, + data->hwmon_cmd0_buf); + if (ret) + return ret; + + ret = nct6694_read_msg(nct6694, REQUEST_PWM_MOD, + REQUEST_PWM_CMD0_OFFSET, + REQUEST_PWM_CMD0_LEN, 0, + REQUEST_PWM_CMD0_LEN, + data->pwm_cmd0_buf); + if (ret) + return ret; + + ret = nct6694_read_msg(nct6694, REQUEST_PWM_MOD, + REQUEST_PWM_CMD1_OFFSET, + REQUEST_PWM_CMD1_LEN, 0, + REQUEST_PWM_CMD1_LEN, + data->pwm_cmd1_buf); + return ret; +} + +static int nct6694_pwm_probe(struct platform_device *pdev) +{ + struct pwm_chip *chip; + struct nct6694_pwm_data *data; + struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent); + int ret; + + chip = devm_pwmchip_alloc(&pdev->dev, NR_PWM, sizeof(*data)); + if (IS_ERR(chip)) + return PTR_ERR(chip); + + data = to_nct6694_pwm_data(chip); + + data->nct6694 = nct6694; + chip->ops = &nct6694_pwm_ops; + + ret = nct6694_pwm_init(data); + if (ret) + return -EIO; + + /* Register pwm device to PWM framework */ + ret = devm_pwmchip_add(&pdev->dev, chip); + if (ret) { + dev_err(&pdev->dev, "Failed to register pwm device!\n"); + return ret; + } + + return 0; +} + +static struct platform_driver nct6694_pwm_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = nct6694_pwm_probe, +}; + +static int __init nct6694_init(void) +{ + int err; + + err = platform_driver_register(&nct6694_pwm_driver); + if (!err) { + if (err) + platform_driver_unregister(&nct6694_pwm_driver); + } + + return err; +} +subsys_initcall(nct6694_init); + +static void __exit nct6694_exit(void) +{ + platform_driver_unregister(&nct6694_pwm_driver); +} +module_exit(nct6694_exit); + +MODULE_DESCRIPTION("USB-PWM driver for NCT6694"); +MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>"); +MODULE_LICENSE("GPL");
This driver supports PWM functionality for NCT6694 MFD device based on USB interface. Signed-off-by: Ming Yu <tmyu0@nuvoton.com> --- MAINTAINERS | 1 + drivers/pwm/Kconfig | 10 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-nct6694.c | 245 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 257 insertions(+) create mode 100644 drivers/pwm/pwm-nct6694.c