@@ -35,14 +35,13 @@ struct sprd_pwm_chn {
struct sprd_pwm_chip {
void __iomem *base;
struct device *dev;
- struct pwm_chip chip;
int num_pwms;
struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM];
};
static inline struct sprd_pwm_chip* sprd_pwm_from_chip(struct pwm_chip *chip)
{
- return container_of(chip, struct sprd_pwm_chip, chip);
+ return pwmchip_priv(chip);
}
/*
@@ -215,65 +214,66 @@ static const struct pwm_ops sprd_pwm_ops = {
.get_state = sprd_pwm_get_state,
};
-static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
+static int sprd_pwm_clk_init(struct device *dev,
+ struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM])
{
struct clk *clk_pwm;
int ret, i;
for (i = 0; i < SPRD_PWM_CHN_NUM; i++) {
- struct sprd_pwm_chn *chn = &spc->chn[i];
int j;
for (j = 0; j < SPRD_PWM_CHN_CLKS_NUM; ++j)
- chn->clks[j].id =
+ chn[i].clks[j].id =
sprd_pwm_clks[i * SPRD_PWM_CHN_CLKS_NUM + j];
- ret = devm_clk_bulk_get(spc->dev, SPRD_PWM_CHN_CLKS_NUM,
- chn->clks);
+ ret = devm_clk_bulk_get(dev, SPRD_PWM_CHN_CLKS_NUM,
+ chn[i].clks);
if (ret) {
if (ret == -ENOENT)
break;
- return dev_err_probe(spc->dev, ret,
+ return dev_err_probe(dev, ret,
"failed to get channel clocks\n");
}
- clk_pwm = chn->clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;
- chn->clk_rate = clk_get_rate(clk_pwm);
+ clk_pwm = chn[i].clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;
+ chn[i].clk_rate = clk_get_rate(clk_pwm);
}
if (!i)
- return dev_err_probe(spc->dev, -ENODEV, "no available PWM channels\n");
+ return dev_err_probe(dev, -ENODEV, "no available PWM channels\n");
- spc->num_pwms = i;
-
- return 0;
+ return i;
}
static int sprd_pwm_probe(struct platform_device *pdev)
{
+ struct pwm_chip *chip;
struct sprd_pwm_chip *spc;
+ struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM];
int ret;
- spc = devm_kzalloc(&pdev->dev, sizeof(*spc), GFP_KERNEL);
- if (!spc)
- return -ENOMEM;
+ ret = sprd_pwm_clk_init(&pdev->dev, chn);
+ if (ret < 0)
+ return ret;
+
+ chip = devm_pwmchip_alloc(&pdev->dev, ret, sizeof(*spc));
+ if (IS_ERR(chip))
+ return PTR_ERR(chip);
+ spc = sprd_pwm_from_chip(chip);
spc->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(spc->base))
return PTR_ERR(spc->base);
spc->dev = &pdev->dev;
+ memcpy(spc->chn, chn, sizeof(chn));
- ret = sprd_pwm_clk_init(spc);
- if (ret)
- return ret;
+ chip->ops = &sprd_pwm_ops;
+ chip->npwm = spc->num_pwms;
- spc->chip.dev = &pdev->dev;
- spc->chip.ops = &sprd_pwm_ops;
- spc->chip.npwm = spc->num_pwms;
-
- ret = devm_pwmchip_add(&pdev->dev, &spc->chip);
+ ret = devm_pwmchip_add(&pdev->dev, chip);
if (ret)
dev_err(&pdev->dev, "failed to add PWM chip\n");
This prepares the pwm-sprd driver to further changes of the pwm core outlined in the commit introducing devm_pwmchip_alloc(). There is no intended semantical change and the driver should behave as before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/pwm/pwm-sprd.c | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-)