Message ID | 20201207134556.25217-4-uwe@kleine-koenig.org |
---|---|
State | Accepted |
Headers | show |
Series | pwm: get rid of pwmchip_add_with_polarity() | expand |
On Mon, Dec 07, 2020 at 02:45:56PM +0100, Uwe Kleine-König wrote: > pwmchip_add() only calls pwmchip_add_with_polarity() and nothing else. All > other users of pwmchip_add_with_polarity() are gone. So drop > pwmchip_add_with_polarity() and move the code instead to pwmchip_add(). > > The initial assignment to pwm->state.polarity is dropped. In every correct > usage of the PWM API this value is overwritten later anyhow. > > Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> > --- > drivers/pwm/core.c | 25 +++---------------------- > include/linux/pwm.h | 2 -- > 2 files changed, 3 insertions(+), 24 deletions(-) There was a conflict between this and patch "pwm: Always allocate PWM chip base ID dynamically", but it was fairly trivial to resolve. Let me know if you think I didn't resolve it correctly. Thierry
Hi Thierry, On 3/22/21 12:32 PM, Thierry Reding wrote: > On Mon, Dec 07, 2020 at 02:45:56PM +0100, Uwe Kleine-König wrote: >> pwmchip_add() only calls pwmchip_add_with_polarity() and nothing else. All >> other users of pwmchip_add_with_polarity() are gone. So drop >> pwmchip_add_with_polarity() and move the code instead to pwmchip_add(). >> >> The initial assignment to pwm->state.polarity is dropped. In every correct >> usage of the PWM API this value is overwritten later anyhow. >> >> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> >> --- >> drivers/pwm/core.c | 25 +++---------------------- >> include/linux/pwm.h | 2 -- >> 2 files changed, 3 insertions(+), 24 deletions(-) > > There was a conflict between this and patch "pwm: Always allocate PWM > chip base ID dynamically", but it was fairly trivial to resolve. Let me > know if you think I didn't resolve it correctly. You did it in the same way I did it on my next branch. (Actually I had the patch order reversed, but the result is the same.) Best regards Uwe
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 1f16f5365d3c..78611487d887 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -260,18 +260,15 @@ static bool pwm_ops_check(const struct pwm_chip *chip) } /** - * pwmchip_add_with_polarity() - register a new PWM chip + * pwmchip_add() - register a new PWM chip * @chip: the PWM chip to add - * @polarity: initial polarity of PWM channels * * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base - * will be used. The initial polarity for all channels is specified by the - * @polarity parameter. + * will be used. * * Returns: 0 on success or a negative error code on failure. */ -int pwmchip_add_with_polarity(struct pwm_chip *chip, - enum pwm_polarity polarity) +int pwmchip_add(struct pwm_chip *chip) { struct pwm_device *pwm; unsigned int i; @@ -303,7 +300,6 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip, pwm->chip = chip; pwm->pwm = chip->base + i; pwm->hwpwm = i; - pwm->state.polarity = polarity; radix_tree_insert(&pwm_tree, pwm->pwm, pwm); } @@ -326,21 +322,6 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip, return ret; } -EXPORT_SYMBOL_GPL(pwmchip_add_with_polarity); - -/** - * pwmchip_add() - register a new PWM chip - * @chip: the PWM chip to add - * - * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base - * will be used. The initial polarity for all channels is normal. - * - * Returns: 0 on success or a negative error code on failure. - */ -int pwmchip_add(struct pwm_chip *chip) -{ - return pwmchip_add_with_polarity(chip, PWM_POLARITY_NORMAL); -} EXPORT_SYMBOL_GPL(pwmchip_add); /** diff --git a/include/linux/pwm.h b/include/linux/pwm.h index e4d84d4db293..8f4eefd129aa 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -392,8 +392,6 @@ int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result, int pwm_set_chip_data(struct pwm_device *pwm, void *data); void *pwm_get_chip_data(struct pwm_device *pwm); -int pwmchip_add_with_polarity(struct pwm_chip *chip, - enum pwm_polarity polarity); int pwmchip_add(struct pwm_chip *chip); int pwmchip_remove(struct pwm_chip *chip); struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
pwmchip_add() only calls pwmchip_add_with_polarity() and nothing else. All other users of pwmchip_add_with_polarity() are gone. So drop pwmchip_add_with_polarity() and move the code instead to pwmchip_add(). The initial assignment to pwm->state.polarity is dropped. In every correct usage of the PWM API this value is overwritten later anyhow. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> --- drivers/pwm/core.c | 25 +++---------------------- include/linux/pwm.h | 2 -- 2 files changed, 3 insertions(+), 24 deletions(-)