diff mbox series

[v2,2/4] pwm: pca9685: Set full OFF bits in probe

Message ID 20201123163622.166048-2-clemens.gruber@pqgruber.com
State Superseded
Headers show
Series [v2,1/4] pwm: pca9685: Switch to atomic API | expand

Commit Message

Clemens Gruber Nov. 23, 2020, 4:36 p.m. UTC 
The full OFF bits are set by default in the PCA9685 LEDn_OFF_H
registers at POR. LEDn_ON_L/H and LEDn_OFF_L default to 0.

The datasheet states that LEDn_OFF and LEDn_ON should never be both set
to the same values.

This patch removes the clearing of the full OFF bit in the probe
function. We still clear the rest of the OFF regs but now we set the
full OFF bit to avoid having both OFF and ON registers set to 0 and
start up in a safe default state.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---

Changes since v1:
- Rebased

 drivers/pwm/pwm-pca9685.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 47a69ee7951f..eaeadfa853cf 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -494,9 +494,9 @@  static int pca9685_pwm_probe(struct i2c_client *client,
 	reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
 	regmap_write(pca->regmap, PCA9685_MODE1, reg);
 
-	/* Clear all "full off" bits */
+	/* Reset OFF registers to HW default (only full OFF bit is set) */
 	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
-	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
+	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, LED_FULL);
 
 	pca->chip.ops = &pca9685_pwm_ops;
 	/* Add an extra channel for ALL_LED */