diff mbox series

[v6,3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks

Message ID 20201021201224.3430546-4-bjorn.andersson@linaro.org
State Not Applicable
Headers show
Series [v6,1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding | expand

Commit Message

Bjorn Andersson Oct. 21, 2020, 8:12 p.m. UTC
The pm8994 contains a 6 LPG channels and the pmi8994 contains 4 MPP
channels and a 4 channel LPG, with TRILED and LUT blocks.

Add nodes for these blocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v5:
- None

 arch/arm64/boot/dts/qcom/pm8994.dtsi  |  9 +++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 20 ++++++++++++++++++++
 2 files changed, 29 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7e4f777746cb..b5bef687aa3c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -86,6 +86,15 @@  pmic@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8994_lpg: lpg {
+			compatible = "qcom,pm8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pm8994_spmi_regulators: regulators {
 			compatible = "qcom,pm8994-regulators";
 		};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28ab9b2d..23f41328d191 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,17 @@  pmi8994_gpios: gpios@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
 	};
 
 	pmic@3 {
@@ -27,6 +38,15 @@  pmic@3 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8994_lpg: lpg@b100 {
+			compatible = "qcom,pmi8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pmi8994_spmi_regulators: regulators {
 			compatible = "qcom,pmi8994-regulators";
 			#address-cells = <1>;