@@ -248,19 +248,18 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
}
}
- spin_lock(&sun4i_pwm->ctrl_lock);
- ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
-
ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
&bypass);
if (ret) {
dev_err(chip->dev, "period exceeds the maximum value\n");
- spin_unlock(&sun4i_pwm->ctrl_lock);
if (!cstate.enabled)
clk_disable_unprepare(sun4i_pwm->clk);
return ret;
}
+ spin_lock(&sun4i_pwm->ctrl_lock);
+ ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
if (sun4i_pwm->data->has_direct_mod_clk_output) {
if (bypass) {
ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
pwm_calculate() calls clk_get_rate() while holding a spin_lock(). This create an issue as clk_get_rate() may sleep. Move pwm_calculate() out of this spin_lock(). Fixes: c32c5c50d4fe ("pwm: sun4i: Switch to atomic PWM") Reported-by: Alexander Finger <alex.mobigo@gmail.com> Sugested-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Alexander Finger <alex.mobigo@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> --- Changes since v1: - Fix Alexander in Reported-by tag - Add Uwe reviewed tag and Alex Tested-by tag drivers/pwm/pwm-sun4i.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)