diff mbox series

[v3,1/2] pwm: Add PWM driver for Intel Keem Bay

Message ID 1597334646-21087-2-git-send-email-vineetha.g.jaya.kumaran@intel.com
State Changes Requested
Headers show
Series Add PWM support for Intel Keem Bay SoC | expand

Commit Message

G Jaya Kumaran, Vineetha Aug. 13, 2020, 4:04 p.m. UTC
From: "Lai, Poey Seng" <poey.seng.lai@intel.com>

Enable PWM support for the Intel Keem Bay SoC.

Signed-off-by: Lai, Poey Seng <poey.seng.lai@intel.com>
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
---
 drivers/pwm/Kconfig       |   9 ++
 drivers/pwm/Makefile      |   1 +
 drivers/pwm/pwm-keembay.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 246 insertions(+)
 create mode 100644 drivers/pwm/pwm-keembay.c

Comments

Andy Shevchenko Aug. 13, 2020, 7:24 p.m. UTC | #1
On Fri, Aug 14, 2020 at 12:04:05AM +0800, vineetha.g.jaya.kumaran@intel.com wrote:
> From: "Lai, Poey Seng" <poey.seng.lai@intel.com>
> 
> Enable PWM support for the Intel Keem Bay SoC.

...

> +static inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
> +					   u32 val, u32 offset)
> +{
> +	u32 buff, tmp;

> +	void __iomem *address;

No need to have this. Just use calc in place.

> +	address = priv->base + offset;

> +	buff = readl(address);

> +	tmp = buff & ~mask;
> +	tmp |= FIELD_PREP(mask, val);

One line and one variable less:

	buff = (buff & ~mask) | FIELD_PREP(...);

But shouldn't be u32_replace_bits() instead?

> +	writel(tmp, address);
> +}

...

> +	 * high time = clock rate * duty cycle / NSEC_PER_SEC
> +	 * low time =  clock rate * (period - duty cycle) / NSEC_PER_SEC

> +	 * e.g. For period 50000ns, duty cycle 30000ns, and clock rate 500MHz:
> +	 * high time = (500000000 * 30000) / 1000000000 = 0x3A98
> +	 * low time = (500000000 * 20000) / 1000000000 = 0x2710

Please, replace all multipliers to physical units
	... 50us ... 30us ...
	... 500MHz * 30us = 0x3a98
	...and so on.

> +	 * Value written to KMB_PWM_HIGHLOW_OFFSET = 0x3A982710

...

> +	priv->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->clk)) {

> +		if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get clock: %pe", priv->clk);
> +
> +		return PTR_ERR(priv->clk);

return dev_err_probe(...);

> +	}

...

> +	ret = pwmchip_add(&priv->chip);
> +	if (ret < 0) {

' < 0' makes any sense?

> +		dev_err(dev, "Failed to add PWM chip: %pe\n", ERR_PTR(ret));
> +		return ret;
> +	}
G Jaya Kumaran, Vineetha Aug. 14, 2020, 11:20 a.m. UTC | #2
> -----Original Message-----
> From: Shevchenko, Andriy <andriy.shevchenko@intel.com>
> Sent: Friday, August 14, 2020 3:24 AM
> To: G Jaya Kumaran, Vineetha <vineetha.g.jaya.kumaran@intel.com>
> Cc: thierry.reding@gmail.com; u.kleine-koenig@pengutronix.de;
> robh+dt@kernel.org; linux-pwm@vger.kernel.org;
> devicetree@vger.kernel.org; Wan Mohamad, Wan Ahmad Zainie
> <wan.ahmad.zainie.wan.mohamad@intel.com>; Raja Subramanian, Lakshmi
> Bai <lakshmi.bai.raja.subramanian@intel.com>
> Subject: Re: [PATCH v3 1/2] pwm: Add PWM driver for Intel Keem Bay
> 
> On Fri, Aug 14, 2020 at 12:04:05AM +0800,
> vineetha.g.jaya.kumaran@intel.com wrote:
> > From: "Lai, Poey Seng" <poey.seng.lai@intel.com>
> >
> > Enable PWM support for the Intel Keem Bay SoC.
> 
> ...
> 
> > +static inline void keembay_pwm_update_bits(struct keembay_pwm
> *priv, u32 mask,
> > +					   u32 val, u32 offset)
> > +{
> > +	u32 buff, tmp;
> 
> > +	void __iomem *address;
> 
> No need to have this. Just use calc in place.
> 

OK, will remove this.

> > +	address = priv->base + offset;
> 
> > +	buff = readl(address);
> 
> > +	tmp = buff & ~mask;
> > +	tmp |= FIELD_PREP(mask, val);
> 
> One line and one variable less:
> 
> 	buff = (buff & ~mask) | FIELD_PREP(...);
> 
> But shouldn't be u32_replace_bits() instead?
> 

Thanks, I will try to switch to this instead.

> > +	writel(tmp, address);
> > +}
> 
> ...
> 
> > +	 * high time = clock rate * duty cycle / NSEC_PER_SEC
> > +	 * low time =  clock rate * (period - duty cycle) / NSEC_PER_SEC
> 
> > +	 * e.g. For period 50000ns, duty cycle 30000ns, and clock rate 500MHz:
> > +	 * high time = (500000000 * 30000) / 1000000000 = 0x3A98
> > +	 * low time = (500000000 * 20000) / 1000000000 = 0x2710
> 
> Please, replace all multipliers to physical units
> 	... 50us ... 30us ...
> 	... 500MHz * 30us = 0x3a98
> 	...and so on.
> 

Noted, will fix this in V4.

> > +	 * Value written to KMB_PWM_HIGHLOW_OFFSET = 0x3A982710
> 
> ...
> 
> > +	priv->clk = devm_clk_get(&pdev->dev, NULL);
> > +	if (IS_ERR(priv->clk)) {
> 
> > +		if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
> > +			dev_err(dev, "Failed to get clock: %pe", priv->clk);
> > +
> > +		return PTR_ERR(priv->clk);
> 
> return dev_err_probe(...);
> 
> > +	}
> 
> ...
> 
> > +	ret = pwmchip_add(&priv->chip);
> > +	if (ret < 0) {
> 
> ' < 0' makes any sense?
> 

OK, will change this to just use 'if (ret)' instead.

> > +		dev_err(dev, "Failed to add PWM chip: %pe\n",
> ERR_PTR(ret));
> > +		return ret;
> > +	}
> 
> --
> With Best Regards,
> Andy Shevchenko
> 

Thanks for the comments, Andy - will make the changes and resubmit for V4.
diff mbox series

Patch

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index cb8d739..2b0419b 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -569,4 +569,13 @@  config PWM_ZX
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-zx.
 
+config PWM_KEEMBAY
+	tristate "Intel Keem Bay PWM driver"
+	depends on ARM64 || COMPILE_TEST
+	help
+	  The platform driver for Intel Keem Bay PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-keembay.
+
 endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index a59c710..0c84ff2 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -55,3 +55,4 @@  obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
 obj-$(CONFIG_PWM_ZX)		+= pwm-zx.o
+obj-$(CONFIG_PWM_KEEMBAY)	+= pwm-keembay.o
diff --git a/drivers/pwm/pwm-keembay.c b/drivers/pwm/pwm-keembay.c
new file mode 100644
index 00000000..4e3d2e1
--- /dev/null
+++ b/drivers/pwm/pwm-keembay.c
@@ -0,0 +1,236 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Keem Bay PWM driver
+ *
+ * Copyright (C) 2020 Intel Corporation
+ * Authors: Lai Poey Seng <poey.seng.lai@intel.com>
+ *          Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+ *
+ * Limitation:
+ * - Upon disabling a channel, the currently running
+ *   period will not be completed. However, upon
+ *   reconfiguration of the duty cycle/period, the
+ *   currently running period will be completed first.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define KMB_TOTAL_PWM_CHANNELS		6
+#define KMB_PWM_COUNT_MAX		0xffff
+#define KMB_PWM_EN_BIT			BIT(31)
+
+/* Mask */
+#define KMB_PWM_HIGH_MASK		GENMASK(31, 16)
+#define KMB_PWM_LOW_MASK		GENMASK(15, 0)
+#define KMB_PWM_COUNT_MASK		GENMASK(31, 0)
+
+/* PWM Register offset */
+#define KMB_PWM_LEADIN_OFFSET(ch)	(0x00 + 4 * (ch))
+#define KMB_PWM_HIGHLOW_OFFSET(ch)	(0x20 + 4 * (ch))
+
+struct keembay_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct keembay_pwm, chip);
+}
+
+static inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
+					   u32 val, u32 offset)
+{
+	u32 buff, tmp;
+	void __iomem *address;
+
+	address = priv->base + offset;
+	buff = readl(address);
+	tmp = buff & ~mask;
+	tmp |= FIELD_PREP(mask, val);
+	writel(tmp, address);
+}
+
+static void keembay_pwm_enable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
+{
+	keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0,
+				KMB_PWM_LEADIN_OFFSET(ch));
+}
+
+static void keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				  struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	unsigned long long pwm_h_count, pwm_l_count;
+	unsigned long clk_rate;
+	u32 buff;
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/* Read channel enabled status */
+	buff = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
+	if (buff & KMB_PWM_EN_BIT)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	/* Read period and duty cycle */
+	buff = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+	pwm_l_count = FIELD_GET(KMB_PWM_LOW_MASK, buff) * NSEC_PER_SEC;
+	pwm_h_count = FIELD_GET(KMB_PWM_HIGH_MASK, buff) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_UP_ULL(pwm_h_count, clk_rate);
+	state->period = DIV_ROUND_UP_ULL(pwm_h_count + pwm_l_count, clk_rate);
+}
+
+static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			     const struct pwm_state *state)
+{
+	struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
+	struct pwm_state current_state;
+	u16 pwm_h_count, pwm_l_count;
+	unsigned long long div;
+	unsigned long clk_rate;
+	u32 pwm_count = 0;
+
+	keembay_pwm_get_state(chip, pwm, &current_state);
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -ENOSYS;
+
+	if (!state->enabled && current_state.enabled) {
+		keembay_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	/*
+	 * The upper 16 bits of the KMB_PWM_HIGHLOW_OFFSET register contain
+	 * the high time of the waveform, while the last 16 bits contain
+	 * the low time of the waveform, in terms of clock cycles.
+	 *
+	 * high time = clock rate * duty cycle / NSEC_PER_SEC
+	 * low time =  clock rate * (period - duty cycle) / NSEC_PER_SEC
+	 *
+	 * e.g. For period 50000ns, duty cycle 30000ns, and clock rate 500MHz:
+	 * high time = (500000000 * 30000) / 1000000000 = 0x3A98
+	 * low time = (500000000 * 20000) / 1000000000 = 0x2710
+	 * Value written to KMB_PWM_HIGHLOW_OFFSET = 0x3A982710
+	 */
+
+	clk_rate = clk_get_rate(priv->clk);
+
+	/* Configure waveform high time */
+	div = clk_rate * state->duty_cycle;
+	div = DIV_ROUND_CLOSEST_ULL(div, NSEC_PER_SEC);
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	pwm_h_count = div;
+
+	/* Configure waveform low time */
+	div = clk_rate * (state->period - state->duty_cycle);
+	div = DIV_ROUND_CLOSEST_ULL(div, NSEC_PER_SEC);
+	if (div > KMB_PWM_COUNT_MAX)
+		return -ERANGE;
+
+	pwm_l_count = div;
+
+	pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, pwm_h_count) |
+		    FIELD_PREP(KMB_PWM_LOW_MASK, pwm_l_count);
+
+	writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
+
+	if (state->enabled && !current_state.enabled)
+		keembay_pwm_enable(priv, pwm->hwpwm);
+
+	return 0;
+}
+
+static const struct pwm_ops keembay_pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = keembay_pwm_apply,
+	.get_state = keembay_pwm_get_state,
+};
+
+static int keembay_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_pwm *priv;
+	int ret, ch;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get clock: %pe", priv->clk);
+
+		return PTR_ERR(priv->clk);
+	}
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->chip.base = -1;
+	priv->chip.dev = dev;
+	priv->chip.ops = &keembay_pwm_ops;
+	priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add PWM chip: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	/* Ensure enable bit for each channel is cleared at boot */
+	for (ch = 0; ch < KMB_TOTAL_PWM_CHANNELS; ch++)
+		keembay_pwm_disable(priv, ch);
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int keembay_pwm_remove(struct platform_device *pdev)
+{
+	struct keembay_pwm *priv = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id keembay_pwm_of_match[] = {
+	{ .compatible = "intel,keembay-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
+
+static struct platform_driver keembay_pwm_driver = {
+	.probe	= keembay_pwm_probe,
+	.remove	= keembay_pwm_remove,
+	.driver	= {
+		.name = "pwm-keembay",
+		.of_match_table = keembay_pwm_of_match,
+	},
+};
+module_platform_driver(keembay_pwm_driver);
+
+MODULE_ALIAS("platform:pwm-keembay");
+MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
+MODULE_LICENSE("GPL v2");