diff mbox

[v3,3/6] pwm: mediatek: fix clock control issue

Message ID 1498802721-32455-4-git-send-email-zhi.mao@mediatek.com
State Accepted
Headers show

Commit Message

Zhi Mao (毛智) June 30, 2017, 6:05 a.m. UTC 
1. prepare top/main clk in mtk_pwm_probe() function,
   it will increase power consumption
   and in original code these clocks is only prepeare but never enabled.
2. pwm clock should be enabled before setting pwm registers
   in function: mtk_pwm_config().
3. delete "pwm_disable" in function:mtk_pwm_remove(),
   as framework should disable all the pwms, before remove them.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c |   69 ++++++++++++++++++++++++++++++--------------
 1 file changed, 47 insertions(+), 22 deletions(-)

Comments

Thierry Reding Aug. 21, 2017, 7:47 a.m. UTC | #1 
On Fri, Jun 30, 2017 at 02:05:18PM +0800, Zhi Mao wrote:
> 1. prepare top/main clk in mtk_pwm_probe() function,
>    it will increase power consumption
>    and in original code these clocks is only prepeare but never enabled.
> 2. pwm clock should be enabled before setting pwm registers
>    in function: mtk_pwm_config().
> 3. delete "pwm_disable" in function:mtk_pwm_remove(),
>    as framework should disable all the pwms, before remove them.
> 
> Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> ---
>  drivers/pwm/pwm-mediatek.c |   69 ++++++++++++++++++++++++++++++--------------
>  1 file changed, 47 insertions(+), 22 deletions(-)

I think the commit description could be better. Try to avoid enumerating
changes like you did. Not only is it tedious to read, but this kind of
enumeration is often a sign that you can split the commit up into
multiple logical changes.

Especially the change described in 3) is not related to the clock. It's
also not a quite correct description, because there is no code in the
framework that disables PWMs on chip removal. Users should've disabled
the PWMs that they were using.

The framework could probably warn about misuse, though.

That said, I've left the change as-is, and changed the commit message to
this:

--- >8 ---
pwm: mediatek: Fix clock control issue

In order to save some power, do not prepare the top and main clocks
during mtk_pwm_probe(). Instead, prepare the clocks only when necessary
and also make sure to enable the clocks to match the semantics of the
common clock framework.

While at it, don't explicitly disable all PWM channels in ->remove()
because all users should have done that already.

Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
--- 8< ---

Try to keep this in mind for future patch submissions.

Applied to for-4.14/drivers, thanks.

Thierry
diff mbox

Patch

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index d08b5b3..554a042 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -2,6 +2,7 @@ 
  * Mediatek Pulse Width Modulator driver
  *
  * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2017 Zhi Mao <zhi.mao@mediatek.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -61,6 +62,42 @@  static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct mtk_pwm_chip, chip);
 }
 
+static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+	int ret = 0;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_TOP]);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_MAIN]);
+	if (ret < 0)
+		goto disable_clk_top;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	if (ret < 0)
+		goto disable_clk_main;
+
+	return 0;
+
+disable_clk_main:
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+disable_clk_top:
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+
+	return ret;
+}
+
+static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+
+	clk_disable_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+}
+
 static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
 				unsigned int offset)
 {
@@ -80,6 +117,11 @@  static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
 	struct clk *clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm];
 	u32 resolution, clkdiv = 0;
+	int ret;
+
+	ret = mtk_pwm_clk_enable(chip, pwm);
+	if (ret < 0)
+		return ret;
 
 	resolution = NSEC_PER_SEC / clk_get_rate(clk);
 
@@ -95,6 +137,8 @@  static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
 
+	mtk_pwm_clk_disable(chip, pwm);
+
 	return 0;
 }
 
@@ -104,7 +148,7 @@  static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	u32 value;
 	int ret;
 
-	ret = clk_prepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	ret = mtk_pwm_clk_enable(chip, pwm);
 	if (ret < 0)
 		return ret;
 
@@ -124,7 +168,7 @@  static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	value &= ~BIT(pwm->hwpwm);
 	writel(value, pc->regs);
 
-	clk_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	mtk_pwm_clk_disable(chip, pwm);
 }
 
 static const struct pwm_ops mtk_pwm_ops = {
@@ -156,14 +200,6 @@  static int mtk_pwm_probe(struct platform_device *pdev)
 			return PTR_ERR(pc->clks[i]);
 	}
 
-	ret = clk_prepare(pc->clks[MTK_CLK_TOP]);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare(pc->clks[MTK_CLK_MAIN]);
-	if (ret < 0)
-		goto disable_clk_top;
-
 	platform_set_drvdata(pdev, pc);
 
 	pc->chip.dev = &pdev->dev;
@@ -174,26 +210,15 @@  static int mtk_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-		goto disable_clk_main;
+		return ret;
 	}
 
 	return 0;
-
-disable_clk_main:
-	clk_unprepare(pc->clks[MTK_CLK_MAIN]);
-disable_clk_top:
-	clk_unprepare(pc->clks[MTK_CLK_TOP]);
-
-	return ret;
 }
 
 static int mtk_pwm_remove(struct platform_device *pdev)
 {
 	struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-	unsigned int i;
-
-	for (i = 0; i < pc->chip.npwm; i++)
-		pwm_disable(&pc->chip.pwms[i]);
 
 	return pwmchip_remove(&pc->chip);
 }