@@ -14,6 +14,7 @@
*/
#include <linux/io.h>
+#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
@@ -24,11 +25,8 @@
#define PWM_ENABLE BIT(31)
#define PWM_SW_UPDATE BIT(30)
#define PWM_BASE_UNIT_SHIFT 8
-#define PWM_BASE_UNIT_MASK 0x00ffff00
#define PWM_ON_TIME_DIV_MASK 0x000000ff
#define PWM_DIVISION_CORRECTION 0x2
-#define PWM_LIMIT (0x8000 + PWM_DIVISION_CORRECTION)
-#define NSECS_PER_SEC 1000000000UL
/* Size of each PWM register space if multiple */
#define PWM_SIZE 0x400
@@ -36,13 +34,14 @@
struct pwm_lpss_chip {
struct pwm_chip chip;
void __iomem *regs;
- unsigned long clk_rate;
+ const struct pwm_lpss_boardinfo *info;
};
/* BayTrail */
const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
.clk_rate = 25000000,
.npwm = 1,
+ .base_unit_bits = 16,
};
EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
@@ -50,6 +49,7 @@ EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
.clk_rate = 19200000,
.npwm = 1,
+ .base_unit_bits = 16,
};
EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
@@ -57,6 +57,7 @@ EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
.clk_rate = 19200000,
.npwm = 4,
+ .base_unit_bits = 22,
};
EXPORT_SYMBOL_GPL(pwm_lpss_bxt_info);
@@ -84,23 +85,25 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
{
struct pwm_lpss_chip *lpwm = to_lpwm(chip);
u8 on_time_div;
- unsigned long c;
- unsigned long long base_unit, freq = NSECS_PER_SEC;
+ unsigned long c, base_unit_range;
+ unsigned long long base_unit, freq = NSEC_PER_SEC;
u32 ctrl;
do_div(freq, period_ns);
- /* The equation is: base_unit = ((freq / c) * 65536) + correction */
- base_unit = freq * 65536;
+ /*
+ * The equation is:
+ * base_unit = ((freq / c) * base_unit_range) + correction
+ */
+ base_unit_range = BIT(lpwm->info->base_unit_bits);
+ base_unit = freq * base_unit_range;
- c = lpwm->clk_rate;
+ c = lpwm->info->clk_rate;
if (!c)
return -EINVAL;
do_div(base_unit, c);
base_unit += PWM_DIVISION_CORRECTION;
- if (base_unit > PWM_LIMIT)
- return -EINVAL;
if (duty_ns <= 0)
duty_ns = 1;
@@ -109,8 +112,10 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
pm_runtime_get_sync(chip->dev);
ctrl = pwm_lpss_read(pwm);
- ctrl &= ~(PWM_BASE_UNIT_MASK | PWM_ON_TIME_DIV_MASK);
- ctrl |= (u16) base_unit << PWM_BASE_UNIT_SHIFT;
+ ctrl &= ~PWM_ON_TIME_DIV_MASK;
+ ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+ base_unit &= (base_unit_range - 1);
+ ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
ctrl |= on_time_div;
/* request PWM to update on next cycle */
ctrl |= PWM_SW_UPDATE;
@@ -156,7 +161,7 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
if (IS_ERR(lpwm->regs))
return ERR_CAST(lpwm->regs);
- lpwm->clk_rate = info->clk_rate;
+ lpwm->info = info;
lpwm->chip.dev = dev;
lpwm->chip.ops = &pwm_lpss_ops;
lpwm->chip.base = -1;
@@ -21,6 +21,7 @@ struct pwm_lpss_chip;
struct pwm_lpss_boardinfo {
unsigned long clk_rate;
unsigned int npwm;
+ unsigned long base_unit_bits;
};
extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info;
For Broxton PWM controller, base unit is defined as 8bit integer and 14bit fraction, so need to update base unit setting to output wave with right frequency. Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> --- change in v5 fix one code style issue in block comments. change in v4 fix one code style issue, exceed 80 characters. change in v3 use BIT macro to calculate base_unit_range; mask base_unit with "base_unit_range - 1". --- drivers/pwm/pwm-lpss.c | 33 +++++++++++++++++++-------------- drivers/pwm/pwm-lpss.h | 1 + 2 files changed, 20 insertions(+), 14 deletions(-)