Show patches with: Archived = No       |   3587 patches
« 1 2 3 435 36 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[v2,3/3] pwm: jz4740: Allow selection of PWM channels 0 and 1 pwm: jz4740: Update to use TCU clocks/regmap - - - 2 0 0 0 2019-11-16 Paul Cercueil New
[v2,2/3] pwm: jz4740: Obtain regmap from parent node pwm: jz4740: Update to use TCU clocks/regmap - - - 2 0 0 0 2019-11-16 Paul Cercueil New
[v2,1/3] pwm: jz4740: Use clocks from TCU driver pwm: jz4740: Update to use TCU clocks/regmap - - - 2 0 0 0 2019-11-16 Paul Cercueil New
[v3,1/1] pwm: Convert period and duty cycle to u64 Convert period and duty cycle to u64 - - - - 0 0 0 2019-11-15 Guru Das Srinagesh New
dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema - - - - 0 0 0 2019-11-15 Benjamin Gaignard New
[v2,1/1] pwm: Convert period and duty cycle to u64 Convert period and duty cycle to u64 - - - - 0 0 0 2019-11-15 Guru Das Srinagesh New
[v3] dt-bindings: mfd: Convert stm32 timers bindings to json-schema [v3] dt-bindings: mfd: Convert stm32 timers bindings to json-schema - - - - 0 0 0 2019-11-14 Benjamin Gaignard New
[4/4] pwm: omap-dmtimer: Allow compiling with COMPILE_TEST [1/4] pwm: omap-dmtimer: remove pwmchip in .remove before making it unfunctional - - - - 0 0 0 2019-11-11 Uwe Kleine-König New
[3/4] pwm: omap-dmtimer: put_device() after of_find_device_by_node() [1/4] pwm: omap-dmtimer: remove pwmchip in .remove before making it unfunctional - 1 - - 0 0 0 2019-11-11 Uwe Kleine-König New
[2/4] pwm: omap-dmtimer: simplify error handling [1/4] pwm: omap-dmtimer: remove pwmchip in .remove before making it unfunctional - 1 - - 0 0 0 2019-11-11 Uwe Kleine-König New
[1/4] pwm: omap-dmtimer: remove pwmchip in .remove before making it unfunctional [1/4] pwm: omap-dmtimer: remove pwmchip in .remove before making it unfunctional - 1 - - 0 0 0 2019-11-11 Uwe Kleine-König New
pwm: omap-dmtimer: Add missing put_device() call in pwm_omap_dmtimer_probe() pwm: omap-dmtimer: Add missing put_device() call in pwm_omap_dmtimer_probe() - 2 - - 0 0 0 2019-11-09 Markus Elfring New
[GIT,PULL] pwm: Fixes for v5.4-rc7 [GIT,PULL] pwm: Fixes for v5.4-rc7 - - - - 0 0 0 2019-11-08 Thierry Reding New
[v4,7/7,DO,NOT,MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM Add support for H6 PWM - - - - 0 0 0 2019-11-08 Clément Péron New
[v4,6/7] arm64: dts: allwinner: h6: Add PWM node Add support for H6 PWM - - - - 0 0 0 2019-11-08 Clément Péron New
[v4,5/7] pwm: sun4i: Add support for H6 PWM Add support for H6 PWM 1 - - - 0 0 0 2019-11-08 Clément Péron New
[v4,4/7] pwm: sun4i: Add support to output source clock directly Add support for H6 PWM - - - - 0 0 0 2019-11-08 Clément Péron New
[v4,3/7] pwm: sun4i: Add an optional probe for bus clock Add support for H6 PWM - - - - 0 0 0 2019-11-08 Clément Péron New
[v4,2/7] pwm: sun4i: Add an optional probe for reset line Add support for H6 PWM - - 1 - 0 0 0 2019-11-08 Clément Péron New
[v4,1/7] dt-bindings: pwm: allwinner: Add H6 PWM description Add support for H6 PWM - - 1 - 0 0 0 2019-11-08 Clément Péron New
[v2] dt-bindings: mfd: Convert stm32 timers bindings to json-schema [v2] dt-bindings: mfd: Convert stm32 timers bindings to json-schema 1 - - - 0 0 0 2019-11-07 Benjamin Gaignard New
[v2] gpio: pca953x: Add Maxim MAX7313 PWM support [v2] gpio: pca953x: Add Maxim MAX7313 PWM support - - - - 0 0 0 2019-11-06 Miquel Raynal New
[v3,7/7,DO,NOT,MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM Add support for H6 PWM - - - - 0 0 0 2019-11-05 Clément Péron New
[v3,6/7] arm64: dts: allwinner: h6: Add PWM node Add support for H6 PWM - - - - 0 0 0 2019-11-05 Clément Péron New
[v3,5/7] pwm: sun4i: Add support for H6 PWM Add support for H6 PWM 1 - - - 0 0 0 2019-11-05 Clément Péron New
[v3,4/7] pwm: sun4i: Add support to output source clock directly Add support for H6 PWM - - - - 0 0 0 2019-11-05 Clément Péron New
[v3,3/7] pwm: sun4i: Add an optional probe for bus clock Add support for H6 PWM - - - - 0 0 0 2019-11-05 Clément Péron New
[v3,2/7] pwm: sun4i: Add an optional probe for reset line Add support for H6 PWM - - 2 - 0 0 0 2019-11-05 Clément Péron New
[v3,1/7] dt-bindings: pwm: allwinner: Add H6 PWM description Add support for H6 PWM - - - - 0 0 0 2019-11-05 Clément Péron New
[26/62] gpio: gpio-mvebu: Use new GPIO_LINE_DIRECTION Untitled series #140706 - - - - 0 0 0 2019-11-05 Matti Vaittinen New
[v2,7/7,DO,NOT,MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,6/7] arm64: dts: allwinner: h6: Add PWM node Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,5/7] pwm: sun4i: Add support for H6 PWM Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,4/7] pwm: sun4i: Add support to output source clock directly Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,3/7] pwm: sun4i: Add an optional probe for bus clock Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,2/7] pwm: sun4i: Add an optional probe for reset line Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[v2,1/7] dt-bindings: pwm: allwinner: Add H6 PWM description Add support for H6 PWM - - - - 0 0 0 2019-11-03 Clément Péron New
[GIT,PULL] pwm: Fixes for v5.4-rc6 [GIT,PULL] pwm: Fixes for v5.4-rc6 - - - - 0 0 0 2019-11-02 Thierry Reding New
[4/4] dt-bindings: mfd: Convert stm32 timers bindings to json-schema Convert STM32 Timer mdf bindings to yaml - - - - 0 0 0 2019-10-31 Benjamin Gaignard New
[3/4] dt-bindings: pwm: Convert stm32 pwm bindings to json-schema Convert STM32 Timer mdf bindings to yaml - - - - 0 0 0 2019-10-31 Benjamin Gaignard New
[2/4] dt-bindings: iio: timer: Convert stm32 IIO trigger bindings to json-schema Convert STM32 Timer mdf bindings to yaml - - - - 0 0 0 2019-10-31 Benjamin Gaignard New
[1/4] dt-bindings: counter: Convert stm32 counter bindings to json-schema Convert STM32 Timer mdf bindings to yaml - - - - 0 0 0 2019-10-31 Benjamin Gaignard New
pwm: implement tracing for .get_state() and .apply_state() pwm: implement tracing for .get_state() and .apply_state() - - 1 - 0 0 0 2019-10-24 Uwe Kleine-König New
[2/2] pwm: rcar: Document inability to set duty_cycle = 0 Untitled series #138265 - - 1 - 0 0 0 2019-10-24 Uwe Kleine-König New
[1/2] pwm: rcar: Drop useless call to pwm_get_state [1/2] pwm: rcar: Drop useless call to pwm_get_state - - 1 - 0 0 0 2019-10-24 Uwe Kleine-König New
[v4,2/2] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema [v4,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema - - 1 - 0 0 0 2019-10-21 Krzysztof Kozlowski New
[v4,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema [v4,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema 2 - - - 0 0 0 2019-10-21 Krzysztof Kozlowski New
Revert "pwm: Let pwm_get_state() return the last implemented state" Revert "pwm: Let pwm_get_state() return the last implemented state" - - 1 2 0 0 0 2019-10-21 Thierry Reding New
[4/4] pwm: imx27: Unconditionally write state to hardware [1/4] pwm: Read initial hardware state at request time - - - 2 0 0 0 2019-10-21 Thierry Reding New
[3/4] pwm: imx27: Cache duty cycle register value [1/4] pwm: Read initial hardware state at request time - - - 2 0 0 0 2019-10-21 Thierry Reding New
[2/4] pwm: cros-ec: Cache duty cycle value [1/4] pwm: Read initial hardware state at request time - - - 1 0 0 0 2019-10-21 Thierry Reding New
[1/4] pwm: Read initial hardware state at request time [1/4] pwm: Read initial hardware state at request time - - - 2 0 0 0 2019-10-21 Thierry Reding New
[8/8] iio: position: Add support for Azoteq IQS624/625 angle sensor Add support for Azoteq IQS620A/621/622/624/625 1 - - - 0 0 0 2019-10-21 Jeff LaBundy New
[7/8] iio: proximity: Add support for Azoteq IQS622 proximity sensor Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
[6/8] iio: light: Add support for Azoteq IQS621 ambient light sensor Add support for Azoteq IQS620A/621/622/624/625 1 - - - 0 0 0 2019-10-21 Jeff LaBundy New
[5/8] pwm: Add support for Azoteq IQS620A PWM generator Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
[4/8] hwmon: Add support for Azoteq IQS620AT temperature sensor Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
[3/8] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625 Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
[2/8] mfd: Add support for Azoteq IQS620A/621/622/624/625 Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
[1/8] dt-bindings: mfd: iqs62x: Add bindings Add support for Azoteq IQS620A/621/622/624/625 - - - - 0 0 0 2019-10-21 Jeff LaBundy New
pwm: bcm-iproc: prevent unloading the driver module while in use pwm: bcm-iproc: prevent unloading the driver module while in use - 1 1 - 0 0 0 2019-10-17 Uwe Kleine-König Accepted
backlight: pwm_bl: configure pwm only once per backlight toggle backlight: pwm_bl: configure pwm only once per backlight toggle - - - 2 0 0 0 2019-10-17 Uwe Kleine-König New
[v2,3/3] pwm: stm32: Validate breakinput data from DT pwm: stm32: Minor cleanups - - - - 0 0 0 2019-10-16 Thierry Reding New
[v2,2/3] pwm: stm32: Pass breakinput instead of its values pwm: stm32: Minor cleanups 1 - - - 0 0 0 2019-10-16 Thierry Reding New
[v2,1/3] pwm: stm32: Remove clutter from ternary operator pwm: stm32: Minor cleanups 1 - - - 0 0 0 2019-10-16 Thierry Reding New
[3/3] pwm: stm32: Pass breakinput instead of its values pwm: stm32: Minor cleanups - - - - 0 0 0 2019-10-16 Thierry Reding New
[2/3] pwm: stm32: Remove confusing bitmask pwm: stm32: Minor cleanups - - - - 0 0 0 2019-10-16 Thierry Reding New
[1/3] pwm: stm32: Remove clutter from ternary operator pwm: stm32: Minor cleanups - - 1 - 0 0 0 2019-10-16 Thierry Reding New
[1/1] pwm: Convert period and duty cycle to u64 Convert period and duty cycle to u64 1 - - - 0 0 0 2019-10-16 Guru Das Srinagesh Accepted
pwm: sun4i: Fix incorrect calculation of duty_cycle/period pwm: sun4i: Fix incorrect calculation of duty_cycle/period 1 1 - - 0 0 0 2019-10-14 Ondřej Jirman Accepted
gpio: pca953x: Add Maxim MAX7313 PWM support gpio: pca953x: Add Maxim MAX7313 PWM support - - - - 0 0 0 2019-10-14 Miquel Raynal New
[11/36] ARM: s5pv210: split from plat-samsung ARM: samsung platform cleanup 2 - - - 0 0 0 2019-10-10 Arnd Bergmann New
[v2,4/4] backlight: pwm_bl: switch to power-of-2 base for fixed-point math backlight: pwm_bl: optimizations and small fix for cie1913 - - 1 - 0 0 0 2019-10-08 Rasmus Villemoes New
[v2,3/4] backlight: pwm_bl: drop use of int_pow() backlight: pwm_bl: optimizations and small fix for cie1913 - - 1 - 0 0 0 2019-10-08 Rasmus Villemoes New
[v2,2/4] backlight: pwm_bl: eliminate a 64/32 division backlight: pwm_bl: optimizations and small fix for cie1913 - - 1 - 0 0 0 2019-10-08 Rasmus Villemoes New
[v2,1/4] backlight: pwm_bl: fix cie1913 comments and constant backlight: pwm_bl: optimizations and small fix for cie1913 - - 1 - 0 0 0 2019-10-08 Rasmus Villemoes New
pwm: stm32: add comment to better describe breakinput feature pwm: stm32: add comment to better describe breakinput feature - - - - 0 0 0 2019-10-08 Fabrice Gasnier Changes Requested
pwm: cros-ec: Let cros_ec_pwm_get_state() return the last applied state pwm: cros-ec: Let cros_ec_pwm_get_state() return the last applied state - 1 - - 0 0 0 2019-10-08 Enric Balletbo i Serra New
pwm: Fix kerneldoc for apply operation pwm: Fix kerneldoc for apply operation - 1 - - 0 0 0 2019-10-06 Bjorn Andersson Superseded
[v2,6/6] pwm: update comment on struct pwm_ops::apply pwm: mxs: add support for setting polarity via DT - - 2 - 0 0 0 2019-10-04 Rasmus Villemoes Accepted
[v2,5/6] pwm: mxs: avoid a division in mxs_pwm_apply() pwm: mxs: add support for setting polarity via DT - - 1 - 0 0 0 2019-10-04 Rasmus Villemoes New
[v2,4/6] dt-bindings: pwm: mxs-pwm: Increase #pwm-cells pwm: mxs: add support for setting polarity via DT 2 - - - 0 0 0 2019-10-04 Rasmus Villemoes New
[v2,3/6] pwm: mxs: add support for inverse polarity pwm: mxs: add support for setting polarity via DT - - - - 0 0 0 2019-10-04 Rasmus Villemoes New
[v2,2/6] pwm: mxs: remove legacy methods pwm: mxs: add support for setting polarity via DT - - 1 - 0 0 0 2019-10-04 Rasmus Villemoes New
[v2,1/6] pwm: mxs: implement ->apply pwm: mxs: add support for setting polarity via DT - - 1 - 0 0 0 2019-10-04 Rasmus Villemoes New
[v2,3/3] pwm: stm32: add power management support Add PM support to STM32 Timer PWM - - - - 0 0 0 2019-10-04 Fabrice Gasnier Accepted
[v2,2/3] pwm: stm32: split breakinput apply routine to ease PM support Add PM support to STM32 Timer PWM - - - - 0 0 0 2019-10-04 Fabrice Gasnier Accepted
[v2,1/3] dt-bindings: pwm-stm32: document pinctrl sleep state Add PM support to STM32 Timer PWM - - 1 - 0 0 0 2019-10-04 Fabrice Gasnier Accepted
pwm: stm32: Fix the usage of uninitialized variable in stm32_pwm_config() pwm: stm32: Fix the usage of uninitialized variable in stm32_pwm_config() - - - - 0 0 0 2019-10-04 Yizhuo Changes Requested
backlight: pwm_bl: Add missing curly branches in else branch backlight: pwm_bl: Add missing curly branches in else branch - - 1 - 0 0 0 2019-10-03 Matthias Kaehlcke New
[v2] backlight: pwm_bl: Don't assign levels table repeatedly [v2] backlight: pwm_bl: Don't assign levels table repeatedly - - 1 - 0 0 0 2019-10-02 Matthias Kaehlcke New
[v3,2/2] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema [v3,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema - - 1 - 0 0 0 2019-10-02 Krzysztof Kozlowski Changes Requested
[v3,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema [v3,1/2] dt-bindings: pwm: Convert PWM bindings to json-schema 1 - - - 0 0 0 2019-10-02 Krzysztof Kozlowski Changes Requested
pwm: sun4i: redundant assignment to variable pval pwm: sun4i: redundant assignment to variable pval - - - - 0 0 0 2019-10-02 Colin King Accepted
backlight: pwm_bl: Don't assign levels table repeatedly backlight: pwm_bl: Don't assign levels table repeatedly - - - - 0 0 0 2019-10-01 Matthias Kaehlcke New
dt-bindings: pwm: rcar: Add r8a774b1 support dt-bindings: pwm: rcar: Add r8a774b1 support - - 1 - 0 0 0 2019-10-01 Biju Das Accepted
[2/2] pwm: stm32: add power management support Add PM support to STM32 Timer PWM - - - - 0 0 0 2019-09-30 Fabrice Gasnier Changes Requested
[1/2] dt-bindings: pwm-stm32: document pinctrl sleep state Add PM support to STM32 Timer PWM - - - - 0 0 0 2019-09-30 Fabrice Gasnier Changes Requested
[GIT,PULL] pwm: Changes for v5.4-rc1 [GIT,PULL] pwm: Changes for v5.4-rc1 - - - - 0 0 0 2019-09-27 Thierry Reding New
[v10,12/12] arm: dts: mediatek: add mt7629 pwm support Add mt7629 and fix mt7628 pwm - - - - 0 0 0 2019-09-25 Sam Shih Rejected
« 1 2 3 435 36 »