| Message ID | cover.1554184734.git.vilhelm.gray@gmail.com |
|---|---|
| Headers | show |
| Series | Introduce the Counter subsystem | expand |
On Tue, 2 Apr 2019 15:30:35 +0900 William Breathitt Gray <vilhelm.gray@gmail.com> wrote: > Changes in v10: > - Fix minor typographical errors in documentation > - Merge the FlexTimer Module Quadrature decoder counter driver patches > > This revision is functionally identical to the last; changes in this > version were made to fix minor typos in the documentation files and also > to pull in the new FTM quadrature decoder counter driver. > > The Generic Counter API has been and is still in a feature freeze until > it is merged into the mainline. The following features will be > investigated after the merge: interrupt support for counter devices, and > a character device interface for low-latency applications. Hi William / al, So the question is how to move this forwards? I'm happy with how it turned out and the existing drivers we had in IIO are a lot cleaner under the counter subsystem (other than the backwards compatibility for those that ever existed in IIO). For those not following closely the situation is: 1. Counter drivers never really fitted that well in IIO, because IIO is focused on an abstraction of individual channels that just doesn't match to these devices. It's just the wrong model. 2. William tried hard in earlier proposals to extend IIO to support these devices well, but it became so convoluted and involved I advised him that we were better off with a separate subsystem. The amount of code overlap between the core IIO support for counters and the reset of IIO was become very small and it would have been a maintenance problem for both. https://lwn.net/Articles/729363/ gives some of the history 3. The new subsystem introduced by this series is fairly simple, clean and well aligned with the way these devices work. There are (I think) 4 initial drivers in this series from 4 different authors so it's got some practical review that way! There are a couple more drivers under development. Right now, not everyone is aware of this work and so we have had a few developers potentially waste their time writing IIO drivers (which are then ported to this) rather that starting with the counter subsystem. So what we are after is more review, or agreement that we can move this series forwards. For now the intent is that the counter subsystem will share the linux-iio mailing list etc but I don't think either William or I have any particularly strong views on how we actually handle the patches. I'm more than happy to take them through the IIO tree, if that works for everyone, particularly Greg as IIO goes through him after me. Once it is in a release, the cross dependency is broken and we can think about longer term approaches. So Greg and others, how do we make progress here? If there are any obvious reviewers not on the CC list, please do draw their attention to this. Thanks, Jonathan +CC linux-api as obviously one of the biggest areas for review is the new userspace ABI. > > Benjamin Gaignard (2): > counter: Add STM32 Timer quadrature encoder > dt-bindings: counter: Document stm32 quadrature encoder > > Fabrice Gasnier (2): > counter: stm32-lptimer: add counter device > dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move > > Patrick Havelange (7): > include/fsl: add common FlexTimer #defines in a separate header. > drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines > drivers/clocksource: timer-fsl-ftm: use common header for FlexTimer > #defines > dt-bindings: counter: ftm-quaddec > counter: add FlexTimer Module Quadrature decoder counter driver > counter: ftm-quaddec: Documentation: Add specific counter sysfs > documentation > LS1021A: dtsi: add ftm quad decoder entries > > William Breathitt Gray (7): > counter: Introduce the Generic Counter interface > counter: Documentation: Add Generic Counter sysfs documentation > docs: Add Generic Counter interface documentation > iio: 104-quad-8: Update license boilerplate > counter: 104-quad-8: Add Generic Counter interface support > counter: 104-quad-8: Documentation: Add Generic Counter sysfs > documentation > iio: counter: Add deprecation markings for IIO Counter attributes > > Documentation/ABI/testing/sysfs-bus-counter | 230 +++ > .../ABI/testing/sysfs-bus-counter-104-quad-8 | 36 + > .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 + > Documentation/ABI/testing/sysfs-bus-iio | 8 + > .../testing/sysfs-bus-iio-counter-104-quad-8 | 16 + > .../bindings/counter/ftm-quaddec.txt | 18 + > .../{iio => }/counter/stm32-lptimer-cnt.txt | 0 > .../bindings/counter/stm32-timer-cnt.txt | 31 + > .../devicetree/bindings/mfd/stm32-lptimer.txt | 2 +- > .../devicetree/bindings/mfd/stm32-timers.txt | 7 + > Documentation/driver-api/generic-counter.rst | 342 ++++ > Documentation/driver-api/index.rst | 1 + > MAINTAINERS | 15 +- > arch/arm/boot/dts/ls1021a.dtsi | 28 + > drivers/Kconfig | 2 + > drivers/Makefile | 1 + > drivers/clocksource/timer-fsl-ftm.c | 15 +- > drivers/{iio => }/counter/104-quad-8.c | 782 +++++++- > drivers/counter/Kconfig | 60 + > drivers/counter/Makefile | 10 + > drivers/counter/counter.c | 1567 +++++++++++++++++ > drivers/counter/ftm-quaddec.c | 356 ++++ > drivers/{iio => }/counter/stm32-lptimer-cnt.c | 361 +++- > drivers/counter/stm32-timer-cnt.c | 390 ++++ > drivers/iio/Kconfig | 1 - > drivers/iio/Makefile | 1 - > drivers/iio/counter/Kconfig | 34 - > drivers/iio/counter/Makefile | 8 - > drivers/pwm/pwm-fsl-ftm.c | 44 +- > include/linux/counter.h | 510 ++++++ > include/linux/counter_enum.h | 45 + > include/linux/fsl/ftm.h | 88 + > 32 files changed, 4877 insertions(+), 148 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-counter > create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 > create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > create mode 100644 Documentation/devicetree/bindings/counter/ftm-quaddec.txt > rename Documentation/devicetree/bindings/{iio => }/counter/stm32-lptimer-cnt.txt (100%) > create mode 100644 Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt > create mode 100644 Documentation/driver-api/generic-counter.rst > rename drivers/{iio => }/counter/104-quad-8.c (44%) > create mode 100644 drivers/counter/Kconfig > create mode 100644 drivers/counter/Makefile > create mode 100644 drivers/counter/counter.c > create mode 100644 drivers/counter/ftm-quaddec.c > rename drivers/{iio => }/counter/stm32-lptimer-cnt.c (51%) > create mode 100644 drivers/counter/stm32-timer-cnt.c > delete mode 100644 drivers/iio/counter/Kconfig > delete mode 100644 drivers/iio/counter/Makefile > create mode 100644 include/linux/counter.h > create mode 100644 include/linux/counter_enum.h > create mode 100644 include/linux/fsl/ftm.h >
On Sun, Apr 07, 2019 at 03:25:50PM +0100, Jonathan Cameron wrote: > On Tue, 2 Apr 2019 15:30:35 +0900 > William Breathitt Gray <vilhelm.gray@gmail.com> wrote: > > > Changes in v10: > > - Fix minor typographical errors in documentation > > - Merge the FlexTimer Module Quadrature decoder counter driver patches > > > > This revision is functionally identical to the last; changes in this > > version were made to fix minor typos in the documentation files and also > > to pull in the new FTM quadrature decoder counter driver. > > > > The Generic Counter API has been and is still in a feature freeze until > > it is merged into the mainline. The following features will be > > investigated after the merge: interrupt support for counter devices, and > > a character device interface for low-latency applications. > > Hi William / al, > > So the question is how to move this forwards? I'm happy with how it turned > out and the existing drivers we had in IIO are a lot cleaner under > the counter subsystem (other than the backwards compatibility for those that > ever existed in IIO). For those not following closely the situation is: I've now sucked this into my staging-testing branch and if 0-day is fine with it, I'll merge it to staging-next in a day or so. This way you can build on it for any iio drivers that might be coming. I do have reservations about that one sysfs file that is multi-line, and I think it will come to bite you in the end over time, so I reserve the right to say "I told you so" when that happens... But, I don't have a better answer for it now, so don't really worry about it :) thanks, greg k-h
On Thu, 25 Apr 2019 21:36:24 +0200 Greg KH <gregkh@linuxfoundation.org> wrote: > On Sun, Apr 07, 2019 at 03:25:50PM +0100, Jonathan Cameron wrote: > > On Tue, 2 Apr 2019 15:30:35 +0900 > > William Breathitt Gray <vilhelm.gray@gmail.com> wrote: > > > > > Changes in v10: > > > - Fix minor typographical errors in documentation > > > - Merge the FlexTimer Module Quadrature decoder counter driver patches > > > > > > This revision is functionally identical to the last; changes in this > > > version were made to fix minor typos in the documentation files and also > > > to pull in the new FTM quadrature decoder counter driver. > > > > > > The Generic Counter API has been and is still in a feature freeze until > > > it is merged into the mainline. The following features will be > > > investigated after the merge: interrupt support for counter devices, and > > > a character device interface for low-latency applications. > > > > Hi William / al, > > > > So the question is how to move this forwards? I'm happy with how it turned > > out and the existing drivers we had in IIO are a lot cleaner under > > the counter subsystem (other than the backwards compatibility for those that > > ever existed in IIO). For those not following closely the situation is: > > I've now sucked this into my staging-testing branch and if 0-day is fine > with it, I'll merge it to staging-next in a day or so. This way you can > build on it for any iio drivers that might be coming. Great thanks. > > I do have reservations about that one sysfs file that is multi-line, and > I think it will come to bite you in the end over time, so I reserve the > right to say "I told you so" when that happens... > > But, I don't have a better answer for it now, so don't really worry > about it :) > > thanks, > > greg k-h Looks like a few late breaking comments came in, but nothing that can't be fixed up before this reaches a release. Thanks, Jonathan
Changes in v10: - Fix minor typographical errors in documentation - Merge the FlexTimer Module Quadrature decoder counter driver patches This revision is functionally identical to the last; changes in this version were made to fix minor typos in the documentation files and also to pull in the new FTM quadrature decoder counter driver. The Generic Counter API has been and is still in a feature freeze until it is merged into the mainline. The following features will be investigated after the merge: interrupt support for counter devices, and a character device interface for low-latency applications. Benjamin Gaignard (2): counter: Add STM32 Timer quadrature encoder dt-bindings: counter: Document stm32 quadrature encoder Fabrice Gasnier (2): counter: stm32-lptimer: add counter device dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move Patrick Havelange (7): include/fsl: add common FlexTimer #defines in a separate header. drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines drivers/clocksource: timer-fsl-ftm: use common header for FlexTimer #defines dt-bindings: counter: ftm-quaddec counter: add FlexTimer Module Quadrature decoder counter driver counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation LS1021A: dtsi: add ftm quad decoder entries William Breathitt Gray (7): counter: Introduce the Generic Counter interface counter: Documentation: Add Generic Counter sysfs documentation docs: Add Generic Counter interface documentation iio: 104-quad-8: Update license boilerplate counter: 104-quad-8: Add Generic Counter interface support counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation iio: counter: Add deprecation markings for IIO Counter attributes Documentation/ABI/testing/sysfs-bus-counter | 230 +++ .../ABI/testing/sysfs-bus-counter-104-quad-8 | 36 + .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 + Documentation/ABI/testing/sysfs-bus-iio | 8 + .../testing/sysfs-bus-iio-counter-104-quad-8 | 16 + .../bindings/counter/ftm-quaddec.txt | 18 + .../{iio => }/counter/stm32-lptimer-cnt.txt | 0 .../bindings/counter/stm32-timer-cnt.txt | 31 + .../devicetree/bindings/mfd/stm32-lptimer.txt | 2 +- .../devicetree/bindings/mfd/stm32-timers.txt | 7 + Documentation/driver-api/generic-counter.rst | 342 ++++ Documentation/driver-api/index.rst | 1 + MAINTAINERS | 15 +- arch/arm/boot/dts/ls1021a.dtsi | 28 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/clocksource/timer-fsl-ftm.c | 15 +- drivers/{iio => }/counter/104-quad-8.c | 782 +++++++- drivers/counter/Kconfig | 60 + drivers/counter/Makefile | 10 + drivers/counter/counter.c | 1567 +++++++++++++++++ drivers/counter/ftm-quaddec.c | 356 ++++ drivers/{iio => }/counter/stm32-lptimer-cnt.c | 361 +++- drivers/counter/stm32-timer-cnt.c | 390 ++++ drivers/iio/Kconfig | 1 - drivers/iio/Makefile | 1 - drivers/iio/counter/Kconfig | 34 - drivers/iio/counter/Makefile | 8 - drivers/pwm/pwm-fsl-ftm.c | 44 +- include/linux/counter.h | 510 ++++++ include/linux/counter_enum.h | 45 + include/linux/fsl/ftm.h | 88 + 32 files changed, 4877 insertions(+), 148 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-counter create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec create mode 100644 Documentation/devicetree/bindings/counter/ftm-quaddec.txt rename Documentation/devicetree/bindings/{iio => }/counter/stm32-lptimer-cnt.txt (100%) create mode 100644 Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt create mode 100644 Documentation/driver-api/generic-counter.rst rename drivers/{iio => }/counter/104-quad-8.c (44%) create mode 100644 drivers/counter/Kconfig create mode 100644 drivers/counter/Makefile create mode 100644 drivers/counter/counter.c create mode 100644 drivers/counter/ftm-quaddec.c rename drivers/{iio => }/counter/stm32-lptimer-cnt.c (51%) create mode 100644 drivers/counter/stm32-timer-cnt.c delete mode 100644 drivers/iio/counter/Kconfig delete mode 100644 drivers/iio/counter/Makefile create mode 100644 include/linux/counter.h create mode 100644 include/linux/counter_enum.h create mode 100644 include/linux/fsl/ftm.h