From patchwork Tue Apr 15 11:49:47 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mohit KUMAR DCG X-Patchwork-Id: 339243 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 0761014008F for ; Tue, 15 Apr 2014 21:52:10 +1000 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750829AbaDOLvd (ORCPT ); Tue, 15 Apr 2014 07:51:33 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:57095 "EHLO mx08-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751129AbaDOLvC (ORCPT ); Tue, 15 Apr 2014 07:51:02 -0400 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx08-00178001.pphosted.com (8.14.5/8.14.5) with SMTP id s3FBmgAZ008817; Tue, 15 Apr 2014 13:50:28 +0200 Received: from beta.dmz-ap.st.com (beta.dmz-ap.st.com [138.198.100.35]) by mx08-00178001.pphosted.com with ESMTP id 1k8yg29p6p-1 (version=TLSv1/SSLv3 cipher=AES256-SHA bits=256 verify=NOT); Tue, 15 Apr 2014 13:50:27 +0200 Received: from zeta.dmz-ap.st.com (ns6.st.com [138.198.234.13]) by beta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 7369F97; Tue, 15 Apr 2014 11:50:22 +0000 (GMT) Received: from Webmail-ap.st.com (eapex1hubcas4.st.com [10.80.176.69]) by zeta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 522CD67E; Tue, 15 Apr 2014 11:50:22 +0000 (GMT) Received: from localhost (10.199.16.23) by Webmail-ap.st.com (10.80.176.7) with Microsoft SMTP Server (TLS) id 8.3.298.1; Tue, 15 Apr 2014 19:50:21 +0800 From: Mohit Kumar To: , , , , Cc: Pratyush Anand , Viresh Kumar , Kishon Vijay Abraham I Subject: [PATCH V8 5/9] phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA Date: Tue, 15 Apr 2014 17:19:47 +0530 Message-ID: X-Mailer: git-send-email 1.7.0.1 In-Reply-To: References: MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.11.96, 1.0.14, 0.0.0000 definitions=2014-04-14_01:2014-04-14, 2014-04-14, 1970-01-01 signatures=0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Pratyush Anand SPEAr1310/40 uses miphy for PCIe and SATA phy. This driver adds support for the same. AHCI phy hookups from arch specific code has been cleaned up. Signed-off-by: Pratyush Anand Tested-by: Mohit Kumar Acked-by: Arnd Bergmann Cc: Viresh Kumar Cc: Kishon Vijay Abraham I Cc: spear-devel@list.st.com Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/spear1310-evb.dts | 4 + arch/arm/boot/dts/spear1310.dtsi | 39 ++++- arch/arm/boot/dts/spear1340-evb.dts | 4 + arch/arm/boot/dts/spear1340.dtsi | 12 ++- arch/arm/boot/dts/spear13xx.dtsi | 5 + arch/arm/mach-spear/Kconfig | 3 + arch/arm/mach-spear/spear1340.c | 127 +--------------- drivers/phy/Kconfig | 12 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-spear1310-miphy.c | 274 ++++++++++++++++++++++++++++++++ drivers/phy/phy-spear1340-miphy.c | 300 +++++++++++++++++++++++++++++++++++ 11 files changed, 652 insertions(+), 130 deletions(-) create mode 100644 drivers/phy/phy-spear1310-miphy.c create mode 100644 drivers/phy/phy-spear1340-miphy.c diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index b56a801..d42c84b 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -106,6 +106,10 @@ status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + cf@b2800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 122ae94..64e7dd5 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -29,24 +29,57 @@ #gpio-cells = <2>; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,miphy", "st,spear1310-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + phy-id = <0>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy1: miphy@eb804000 { + compatible = "st,miphy", "st,spear1310-miphy"; + reg = <0xeb804000 0x4000>; + misc = <&misc>; + phy-id = <1>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy2: miphy@eb808000 { + compatible = "st,miphy", "st,spear1310-miphy"; + reg = <0xeb808000 0x4000>; + misc = <&misc>; + phy-id = <2>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 68 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b1800000 { + ahci1: ahci@b1800000 { compatible = "snps,spear-ahci"; reg = <0xb1800000 0x10000>; interrupts = <0 69 0x4>; + phys = <&miphy1 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b4000000 { + ahci2: ahci@b4000000 { compatible = "snps,spear-ahci"; reg = <0xb4000000 0x10000>; interrupts = <0 70 0x4>; + phys = <&miphy2 0>; + phy-names = "sata-phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index d6c30ae..b23e05e 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -122,6 +122,10 @@ status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + dma@ea800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 54d128d..b8b32c7 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -31,10 +31,20 @@ status = "disabled"; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,miphy", "st,spear1340-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 72 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 4382547..3a72508 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -220,6 +220,11 @@ 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; + misc: syscon@e0700000 { + compatible = "st,spear1340-misc", "syscon"; + reg = <0xe0700000 0x1000>; + }; + gpio0: gpio@e0600000 { compatible = "arm,pl061", "arm,primecell"; reg = <0xe0600000 0x1000>; diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 0786249..ce1e70f 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -20,6 +20,7 @@ config ARCH_SPEAR13XX select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL + select MFD_SYSCON help Supports for ARM's SPEAR13XX family @@ -28,12 +29,14 @@ if ARCH_SPEAR13XX config MACH_SPEAR1310 bool "SPEAr1310 Machine support with Device Tree" select PINCTRL_SPEAR1310 + select PHY_ST_SPEAR1310_MIPHY help Supports ST SPEAr1310 machine configured via the device-tree config MACH_SPEAR1340 bool "SPEAr1340 Machine support with Device Tree" select PINCTRL_SPEAR1340 + select PHY_ST_SPEAR1340_MIPHY help Supports ST SPEAr1340 machine configured via the device-tree diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 7b6bff7..5f06166 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -11,138 +11,13 @@ * warranty of any kind, whether express or implied. */ -#define pr_fmt(fmt) "SPEAr1340: " fmt - -#include -#include -#include #include #include #include "generic.h" -#include - -/* FIXME: Move SATA PHY code into a standalone driver */ - -/* Base addresses */ -#define SPEAR1340_SATA_BASE UL(0xB1000000) - -/* Power Management Registers */ -#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) -#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104) -#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108) - -#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318) -#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C) -#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320) - -/* PCIE - SATA configuration registers */ -#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424) - /* PCIE CFG MASks */ - #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11) - #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10) - #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9) - #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8) - #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4) - #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3) - #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2) - #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1) - #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) - #define SPEAR1340_PCIE_SATA_SEL_SATA (1) - #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F - #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ - SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ - SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ - SPEAR1340_PCIE_CFG_POWERUP_RESET | \ - SPEAR1340_PCIE_CFG_DEVICE_PRESENT) - #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ - SPEAR1340_SATA_CFG_PM_CLK_EN | \ - SPEAR1340_SATA_CFG_POWERUP_RESET | \ - SPEAR1340_SATA_CFG_RX_CLK_EN | \ - SPEAR1340_SATA_CFG_TX_CLK_EN) - -#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428) - #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31) - #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27) - #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) - #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) - #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ - (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ - SPEAR1340_MIPHY_CLK_REF_DIV2 | \ - SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ - (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) - #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ - (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ - SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) - -/* SATA device registration */ -static int sata_miphy_init(struct device *dev, void __iomem *addr) -{ - writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG); - writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK, - SPEAR1340_PCIE_MIPHY_CFG); - /* Switch on sata power domain */ - writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG); - msleep(20); - /* Disable PCIE SATA Controller reset */ - writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)), - SPEAR1340_PERIP1_SW_RST); - msleep(20); - - return 0; -} - -void sata_miphy_exit(struct device *dev) -{ - writel(0, SPEAR1340_PCIE_SATA_CFG); - writel(0, SPEAR1340_PCIE_MIPHY_CFG); - - /* Enable PCIE SATA Controller reset */ - writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)), - SPEAR1340_PERIP1_SW_RST); - msleep(20); - /* Switch off sata power domain */ - writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG); - msleep(20); -} - -int sata_suspend(struct device *dev) -{ - if (dev->power.power_state.event == PM_EVENT_FREEZE) - return 0; - - sata_miphy_exit(dev); - - return 0; -} - -int sata_resume(struct device *dev) -{ - if (dev->power.power_state.event == PM_EVENT_THAW) - return 0; - - return sata_miphy_init(dev, NULL); -} - -static struct ahci_platform_data sata_pdata = { - .init = sata_miphy_init, - .exit = sata_miphy_exit, - .suspend = sata_suspend, - .resume = sata_resume, -}; - -/* Add SPEAr1340 auxdata to pass platform data */ -static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, - &sata_pdata), - {} -}; static void __init spear1340_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear1340_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 3bb05f1..0bc93a1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -166,4 +166,16 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 2faf78e..7b7886a 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -18,3 +18,5 @@ obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c new file mode 100644 index 0000000..6136634 --- /dev/null +++ b/drivers/phy/phy-spear1310-miphy.c @@ -0,0 +1,274 @@ +/* + * ST SPEAr1310-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1310 Registers */ +#define SPEAR1310_PCIE_SATA_CFG 0x3A4 + #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31) + #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30) + #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29) + #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31) + #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30) + #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29) + #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27) + #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26) + #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25) + #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24) + #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23) + #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22) + #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21) + #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20) + #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19) + #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18) + #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17) + #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16) + #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10) + #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7) + #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6) + #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5) + #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4) + #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3) + #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2) + #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1) + #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0) + + #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29))) + #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \ + BIT((x + 29))) + #define SPEAR1310_PCIE_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \ + SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \ + SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT) + #define SPEAR1310_SATA_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \ + SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \ + SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_TX_CLK_EN) + +#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8 + #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31) + #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28) + #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16) + #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15) + #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12) + #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25)) + +#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC + +enum spear1310_miphy_mode { + SATA, + PCIE, +}; + +struct spear1310_miphy_priv { + /* instance id of this phy */ + u32 id; + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1310_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv) +{ + u32 val; + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE); + + switch (priv->id) { + case 0: + val = SPEAR1310_PCIE_CFG_VAL(0); + break; + case 1: + val = SPEAR1310_PCIE_CFG_VAL(1); + break; + case 2: + val = SPEAR1310_PCIE_CFG_VAL(2); + break; + default: + return -EINVAL; + } + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), val); + + return 0; +} + +static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), 0); + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0); + + return 0; +} + +static int spear1310_miphy_init(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_init(priv); + + return ret; +} + +static int spear1310_miphy_exit(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1310_miphy_of_match[] = { + { .compatible = "st,spear1310-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match); + +static struct phy_ops spear1310_miphy_ops = { + .init = spear1310_miphy_init, + .exit = spear1310_miphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *spear1310_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1310_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return NULL; + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return NULL; + } + + return priv->phy; +} + +static int __init spear1310_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1310_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "can't alloc spear1310_miphy private date memory\n"); + return -ENOMEM; + } + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) { + dev_err(dev, "failed to find phy id\n"); + return -EINVAL; + } + + priv->phy = devm_phy_create(dev, &spear1310_miphy_ops, NULL); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1310_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1310_miphy_driver = { + .probe = spear1310_miphy_probe, + .driver = { + .name = "spear1310-miphy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear1310_miphy_of_match), + }, +}; + +static int __init spear1310_miphy_phy_init(void) +{ + return platform_driver_register(&spear1310_miphy_driver); +} +module_init(spear1310_miphy_phy_init); + +static void __exit spear1310_miphy_phy_exit(void) +{ + platform_driver_unregister(&spear1310_miphy_driver); +} +module_exit(spear1310_miphy_phy_exit); + +MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c new file mode 100644 index 0000000..cbaf284 --- /dev/null +++ b/drivers/phy/phy-spear1340-miphy.c @@ -0,0 +1,300 @@ +/* + * ST spear1340-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1340 Registers */ +/* Power Management Registers */ +#define SPEAR1340_PCM_CFG 0x100 + #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11) +#define SPEAR1340_PCM_WKUP_CFG 0x104 +#define SPEAR1340_SWITCH_CTR 0x108 + +#define SPEAR1340_PERIP1_SW_RST 0x318 + #define SPEAR1340_PERIP1_SW_RSATA BIT(12) +#define SPEAR1340_PERIP2_SW_RST 0x31C +#define SPEAR1340_PERIP3_SW_RST 0x320 + +/* PCIE - SATA configuration registers */ +#define SPEAR1340_PCIE_SATA_CFG 0x424 + /* PCIE CFG MASks */ + #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10) + #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4) + #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3) + #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2) + #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1) + #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) + #define SPEAR1340_PCIE_SATA_SEL_SATA (1) + #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F + #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ + SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ + SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ + SPEAR1340_PCIE_CFG_POWERUP_RESET | \ + SPEAR1340_PCIE_CFG_DEVICE_PRESENT) + #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ + SPEAR1340_SATA_CFG_PM_CLK_EN | \ + SPEAR1340_SATA_CFG_POWERUP_RESET | \ + SPEAR1340_SATA_CFG_RX_CLK_EN | \ + SPEAR1340_SATA_CFG_TX_CLK_EN) + +#define SPEAR1340_PCIE_MIPHY_CFG 0x428 + #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31) + #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27) + #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) + #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_CLK_REF_DIV2 | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) + +enum spear1340_miphy_mode { + SATA, + PCIE, +}; + +struct spear1340_miphy_priv { + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1340_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, SPEAR1340_SATA_CFG_VAL); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK); + /* Switch on sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, + SPEAR1340_PCM_CFG_SATA_POWER_EN); + msleep(20); + /* Disable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, 0); + msleep(20); + + return 0; +} + +static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + + /* Enable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, + SPEAR1340_PERIP1_SW_RSATA); + msleep(20); + /* Switch off sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, 0); + msleep(20); + + return 0; +} + +static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, SPEAR1340_PCIE_CFG_VAL); + + return 0; +} + +static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + + return 0; +} + +static int spear1340_miphy_init(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_init(priv); + + return ret; +} + +static int spear1340_miphy_exit(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1340_miphy_of_match[] = { + { .compatible = "st,spear1340-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match); + +static struct phy_ops spear1340_miphy_ops = { + .init = spear1340_miphy_init, + .exit = spear1340_miphy_exit, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_PM_SLEEP +static int spear1340_miphy_suspend(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + + return ret; +} + +static int spear1340_miphy_resume(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend, + spear1340_miphy_resume); + +static struct phy *spear1340_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return NULL; + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return NULL; + } + + return priv->phy; +} + +static int __init spear1340_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1340_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "can't alloc spear1340_miphy private date memory\n"); + return -ENOMEM; + } + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + priv->phy = devm_phy_create(dev, &spear1340_miphy_ops, NULL); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1340_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1340_miphy_driver = { + .probe = spear1340_miphy_probe, + .driver = { + .name = "spear1340-miphy", + .owner = THIS_MODULE, + .pm = &spear1340_miphy_pm_ops, + .of_match_table = of_match_ptr(spear1340_miphy_of_match), + }, +}; + +static int __init spear1340_miphy_phy_init(void) +{ + return platform_driver_register(&spear1340_miphy_driver); +} +module_init(spear1340_miphy_phy_init); + +static void __exit spear1340_miphy_phy_exit(void) +{ + platform_driver_unregister(&spear1340_miphy_driver); +} +module_exit(spear1340_miphy_phy_exit); + +MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2");