| Message ID | SA1PR19MB5572EAD4025173FA9F3B3937A05A9@SA1PR19MB5572.namprd19.prod.outlook.com |
|---|---|
| State | New |
| Headers | show |
| Series | misc: pci_endpoint_test: simplify endpoint test read and write operations | expand |
On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > ********************************************************************** > This email and attachments contain Ambarella Proprietary and/or Confidential Information and is intended solely for the use of the individual(s) to whom it is addressed. Any unauthorized review, use, disclosure, distribute, copy, or print is prohibited. If you are not an intended recipient, please contact the sender by reply email and destroy all copies of the original message. Thank you. Now deleted.
> -----Original Message----- > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > Sent: Thursday, January 20, 2022 4:06 PM > To: Li Chen > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test read > and write operations > > On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > > > ************************************************************** > ******** > > This email and attachments contain Ambarella Proprietary and/or Confidential > Information and is intended solely for the use of the individual(s) to whom it is > addressed. Any unauthorized review, use, disclosure, distribute, copy, or print is > prohibited. If you are not an intended recipient, please contact the sender by > reply email and destroy all copies of the original message. Thank you. > > Now deleted. Hi, Greg I'm sorry that I have no way to remove this message by myself. Regards, Li
On Thu, Jan 20, 2022 at 08:09:20AM +0000, Li Chen wrote: > > -----Original Message----- > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > Sent: Thursday, January 20, 2022 4:06 PM > > To: Li Chen > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > kernel@vger.kernel.org > > Subject: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test read > > and write operations > > > > On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > > > > > ************************************************************** > > ******** > > > This email and attachments contain Ambarella Proprietary and/or Confidential > > Information and is intended solely for the use of the individual(s) to whom it is > > addressed. Any unauthorized review, use, disclosure, distribute, copy, or print is > > prohibited. If you are not an intended recipient, please contact the sender by > > reply email and destroy all copies of the original message. Thank you. > > > > Now deleted. > > Hi, Greg > > I'm sorry that I have no way to remove this message by myself. Sorry, but patches/emails with that notice on it are not allowed to be accepted for obvious reasons. Please work with your company to fix this.
> -----Original Message----- > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > Sent: Thursday, January 20, 2022 4:17 PM > To: Li Chen > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > read and write operations > > On Thu, Jan 20, 2022 at 08:09:20AM +0000, Li Chen wrote: > > > -----Original Message----- > > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > > Sent: Thursday, January 20, 2022 4:06 PM > > > To: Li Chen > > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > > kernel@vger.kernel.org > > > Subject: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > read > > > and write operations > > > > > > On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > > > > > > > > ************************************************************** > > > ******** > > > > This email and attachments contain Ambarella Proprietary and/or > Confidential > > > Information and is intended solely for the use of the individual(s) to whom it > is > > > addressed. Any unauthorized review, use, disclosure, distribute, copy, or > print is > > > prohibited. If you are not an intended recipient, please contact the sender by > > > reply email and destroy all copies of the original message. Thank you. > > > > > > Now deleted. > > > > Hi, Greg > > > > I'm sorry that I have no way to remove this message by myself. > > Sorry, but patches/emails with that notice on it are not allowed to be > accepted for obvious reasons. Please work with your company to fix > this. Ok, thanks! So, should I resend this patch after fixing this self-attached message with my company? Regards, Li
On Thu, Jan 20, 2022 at 08:25:51AM +0000, Li Chen wrote: > > -----Original Message----- > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > Sent: Thursday, January 20, 2022 4:17 PM > > To: Li Chen > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > kernel@vger.kernel.org > > Subject: Re: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > > read and write operations > > > > On Thu, Jan 20, 2022 at 08:09:20AM +0000, Li Chen wrote: > > > > -----Original Message----- > > > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > > > Sent: Thursday, January 20, 2022 4:06 PM > > > > To: Li Chen > > > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > > > kernel@vger.kernel.org > > > > Subject: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > > read > > > > and write operations > > > > > > > > On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > > > > > > > > > > > ************************************************************** > > > > ******** > > > > > This email and attachments contain Ambarella Proprietary and/or > > Confidential > > > > Information and is intended solely for the use of the individual(s) to whom it > > is > > > > addressed. Any unauthorized review, use, disclosure, distribute, copy, or > > print is > > > > prohibited. If you are not an intended recipient, please contact the sender by > > > > reply email and destroy all copies of the original message. Thank you. > > > > > > > > Now deleted. > > > > > > Hi, Greg > > > > > > I'm sorry that I have no way to remove this message by myself. > > > > Sorry, but patches/emails with that notice on it are not allowed to be > > accepted for obvious reasons. Please work with your company to fix > > this. > > Ok, thanks! So, should I resend this patch after fixing this self-attached message with my company? As the original is not acceptable, yes, please do.
> -----Original Message----- > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > Sent: Thursday, January 20, 2022 4:42 PM > To: Li Chen > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > read and write operations > > On Thu, Jan 20, 2022 at 08:25:51AM +0000, Li Chen wrote: > > > -----Original Message----- > > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > > Sent: Thursday, January 20, 2022 4:17 PM > > > To: Li Chen > > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > > kernel@vger.kernel.org > > > Subject: Re: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint > test > > > read and write operations > > > > > > On Thu, Jan 20, 2022 at 08:09:20AM +0000, Li Chen wrote: > > > > > -----Original Message----- > > > > > From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] > > > > > Sent: Thursday, January 20, 2022 4:06 PM > > > > > To: Li Chen > > > > > Cc: Kishon Vijay Abraham I; Lorenzo Pieralisi; Krzysztof Wilczyński; Arnd > > > > > Bergmann; Bjorn Helgaas; linux-pci@vger.kernel.org; linux- > > > > > kernel@vger.kernel.org > > > > > Subject: [EXT] Re: [PATCH] misc: pci_endpoint_test: simplify endpoint test > > > read > > > > > and write operations > > > > > > > > > > On Thu, Jan 20, 2022 at 08:03:17AM +0000, Li Chen wrote: > > > > > > > > > > > > > > > ************************************************************** > > > > > ******** > > > > > > This email and attachments contain Ambarella Proprietary and/or > > > Confidential > > > > > Information and is intended solely for the use of the individual(s) to > whom it > > > is > > > > > addressed. Any unauthorized review, use, disclosure, distribute, copy, or > > > print is > > > > > prohibited. If you are not an intended recipient, please contact the sender > by > > > > > reply email and destroy all copies of the original message. Thank you. > > > > > > > > > > Now deleted. > > > > > > > > Hi, Greg > > > > > > > > I'm sorry that I have no way to remove this message by myself. > > > > > > Sorry, but patches/emails with that notice on it are not allowed to be > > > accepted for obvious reasons. Please work with your company to fix > > > this. > > > > Ok, thanks! So, should I resend this patch after fixing this self-attached > message with my company? > > As the original is not acceptable, yes, please do. My company doesn't allow to remove this message, it's really a sad story. I will re-send this patch using my personal zoho mail. Regards, Li
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 2ed7e3aaff3a8..55ae2f1851a13 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -103,6 +103,11 @@ enum pci_barno { BAR_5, }; +enum operation { + EPF_READ, + EPF_WRITE, +}; + struct pci_endpoint_test { struct pci_dev *pdev; void __iomem *base; @@ -142,6 +147,107 @@ static inline u32 pci_endpoint_test_bar_readl(struct pci_endpoint_test *test, { return readl(test->bar[bar] + offset); } +static bool pci_endpoint_test_transfer_data(struct pci_endpoint_test *test, + unsigned long arg, const enum operation operation) +{ + struct pci_endpoint_test_xfer_param param; + bool ret = false; + u32 flags = 0; + bool use_dma; + void *addr; + dma_addr_t phys_addr; + struct pci_dev *pdev = test->pdev; + struct device *dev = &pdev->dev; + void *orig_addr; + dma_addr_t orig_phys_addr; + size_t offset; + size_t alignment = test->alignment; + int irq_type = test->irq_type; + size_t size; + int err; + + err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); + if (err != 0) { + dev_err(dev, "Failed to get transfer param\n"); + return false; + } + + size = param.size; + if (size > SIZE_MAX - alignment) + goto err; + + use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); + if (use_dma) + flags |= FLAG_USE_DMA; + + if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { + dev_err(dev, "Invalid IRQ type option\n"); + goto err; + } + + orig_addr = kzalloc(size + alignment, GFP_KERNEL); + if (!orig_addr) + goto err; + + get_random_bytes(orig_addr, size + alignment); + + orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment, + operation == EPF_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + if (dma_mapping_error(dev, orig_phys_addr)) { + dev_err(dev, "failed to map source buffer address\n"); + goto err_phys_addr; + } + + if (alignment && !IS_ALIGNED(orig_phys_addr, alignment)) { + phys_addr = PTR_ALIGN(orig_phys_addr, alignment); + offset = phys_addr - orig_phys_addr; + addr = orig_addr + offset; + } else { + phys_addr = orig_phys_addr; + addr = orig_addr; + } + + if (operation == EPF_WRITE) { + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM, + crc32_le(~0, addr, size)); + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR, + lower_32_bits(phys_addr)); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR, + upper_32_bits(phys_addr)); + } else { + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR, + lower_32_bits(phys_addr)); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR, + upper_32_bits(phys_addr)); + } + + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); + + // if we ask rc to write to ep, then ep should do read operation, and vice versa. + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, + operation == EPF_WRITE ? COMMAND_READ : COMMAND_WRITE); + + wait_for_completion(&test->irq_raised); + + dma_unmap_single(dev, orig_phys_addr, size + alignment, + operation == EPF_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (operation == WRITE) + ret = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS) & STATUS_READ_SUCCESS; + else + ret = crc32_le(~0, addr, size) == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM); + +err_phys_addr: + kfree(orig_addr); + +err: + return ret; +} static inline void pci_endpoint_test_bar_writel(struct pci_endpoint_test *test, int bar, u32 offset, u32 value) @@ -473,191 +579,13 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, static bool pci_endpoint_test_write(struct pci_endpoint_test *test, unsigned long arg) { - struct pci_endpoint_test_xfer_param param; - bool ret = false; - u32 flags = 0; - bool use_dma; - u32 reg; - void *addr; - dma_addr_t phys_addr; - struct pci_dev *pdev = test->pdev; - struct device *dev = &pdev->dev; - void *orig_addr; - dma_addr_t orig_phys_addr; - size_t offset; - size_t alignment = test->alignment; - int irq_type = test->irq_type; - size_t size; - u32 crc32; - int err; - - err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); - if (err != 0) { - dev_err(dev, "Failed to get transfer param\n"); - return false; - } - - size = param.size; - if (size > SIZE_MAX - alignment) - goto err; - - use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); - if (use_dma) - flags |= FLAG_USE_DMA; - - if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { - dev_err(dev, "Invalid IRQ type option\n"); - goto err; - } - - orig_addr = kzalloc(size + alignment, GFP_KERNEL); - if (!orig_addr) { - dev_err(dev, "Failed to allocate address\n"); - ret = false; - goto err; - } - - get_random_bytes(orig_addr, size + alignment); - - orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment, - DMA_TO_DEVICE); - if (dma_mapping_error(dev, orig_phys_addr)) { - dev_err(dev, "failed to map source buffer address\n"); - ret = false; - goto err_phys_addr; - } - - if (alignment && !IS_ALIGNED(orig_phys_addr, alignment)) { - phys_addr = PTR_ALIGN(orig_phys_addr, alignment); - offset = phys_addr - orig_phys_addr; - addr = orig_addr + offset; - } else { - phys_addr = orig_phys_addr; - addr = orig_addr; - } - - crc32 = crc32_le(~0, addr, size); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM, - crc32); - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR, - lower_32_bits(phys_addr)); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR, - upper_32_bits(phys_addr)); - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, - COMMAND_READ); - - wait_for_completion(&test->irq_raised); - - reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS); - if (reg & STATUS_READ_SUCCESS) - ret = true; - - dma_unmap_single(dev, orig_phys_addr, size + alignment, - DMA_TO_DEVICE); - -err_phys_addr: - kfree(orig_addr); - -err: - return ret; + return pci_endpoint_test_transfer_data(test, arg, EPF_WRITE); } static bool pci_endpoint_test_read(struct pci_endpoint_test *test, unsigned long arg) { - struct pci_endpoint_test_xfer_param param; - bool ret = false; - u32 flags = 0; - bool use_dma; - size_t size; - void *addr; - dma_addr_t phys_addr; - struct pci_dev *pdev = test->pdev; - struct device *dev = &pdev->dev; - void *orig_addr; - dma_addr_t orig_phys_addr; - size_t offset; - size_t alignment = test->alignment; - int irq_type = test->irq_type; - u32 crc32; - int err; - - err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); - if (err) { - dev_err(dev, "Failed to get transfer param\n"); - return false; - } - - size = param.size; - if (size > SIZE_MAX - alignment) - goto err; - - use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); - if (use_dma) - flags |= FLAG_USE_DMA; - - if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) { - dev_err(dev, "Invalid IRQ type option\n"); - goto err; - } - - orig_addr = kzalloc(size + alignment, GFP_KERNEL); - if (!orig_addr) { - dev_err(dev, "Failed to allocate destination address\n"); - ret = false; - goto err; - } - - orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment, - DMA_FROM_DEVICE); - if (dma_mapping_error(dev, orig_phys_addr)) { - dev_err(dev, "failed to map source buffer address\n"); - ret = false; - goto err_phys_addr; - } - - if (alignment && !IS_ALIGNED(orig_phys_addr, alignment)) { - phys_addr = PTR_ALIGN(orig_phys_addr, alignment); - offset = phys_addr - orig_phys_addr; - addr = orig_addr + offset; - } else { - phys_addr = orig_phys_addr; - addr = orig_addr; - } - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR, - lower_32_bits(phys_addr)); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR, - upper_32_bits(phys_addr)); - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); - - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, - COMMAND_WRITE); - - wait_for_completion(&test->irq_raised); - - dma_unmap_single(dev, orig_phys_addr, size + alignment, - DMA_FROM_DEVICE); - - crc32 = crc32_le(~0, addr, size); - if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM)) - ret = true; - -err_phys_addr: - kfree(orig_addr); -err: - return ret; + return pci_endpoint_test_transfer_data(test, arg, EPF_READ); } static bool pci_endpoint_test_clear_irq(struct pci_endpoint_test *test)
Introduce pci_endpoint_epf_transfer_data to simplify read and write operations. Signed-off-by: Li Chen <lchen@ambarella.com> --- drivers/misc/pci_endpoint_test.c | 288 ++++++++++++------------------- 1 file changed, 108 insertions(+), 180 deletions(-)