@@ -1323,6 +1323,28 @@ static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
return bridge->link_state;
}
+static u8 pci_calc_aspm_disable_mask(int state)
+{
+ state &= ~PCIE_LINK_STATE_CLKPM;
+
+ /* L1 PM substates require L1 */
+ if (state & PCIE_LINK_STATE_L1)
+ state |= PCIE_LINK_STATE_L1SS;
+
+ return state;
+}
+
+static u8 pci_calc_aspm_enable_mask(int state)
+{
+ state &= ~PCIE_LINK_STATE_CLKPM;
+
+ /* L1 PM substates require L1 */
+ if (state & PCIE_LINK_STATE_L1SS)
+ state |= PCIE_LINK_STATE_L1;
+
+ return state;
+}
+
static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool locked)
{
struct pcie_link_state *link = pcie_aspm_get_link(pdev);
@@ -1345,19 +1367,7 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool locked
if (!locked)
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
- if (state & PCIE_LINK_STATE_L0S)
- link->aspm_disable |= PCIE_LINK_STATE_L0S;
- if (state & PCIE_LINK_STATE_L1)
- /* L1 PM substates require L1 */
- link->aspm_disable |= PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_L1SS;
- if (state & PCIE_LINK_STATE_L1_1)
- link->aspm_disable |= PCIE_LINK_STATE_L1_1;
- if (state & PCIE_LINK_STATE_L1_2)
- link->aspm_disable |= PCIE_LINK_STATE_L1_2;
- if (state & PCIE_LINK_STATE_L1_1_PCIPM)
- link->aspm_disable |= PCIE_LINK_STATE_L1_1_PCIPM;
- if (state & PCIE_LINK_STATE_L1_2_PCIPM)
- link->aspm_disable |= PCIE_LINK_STATE_L1_2_PCIPM;
+ link->aspm_disable |= pci_calc_aspm_disable_mask(state);
pcie_config_aspm_link(link, policy_to_aspm_state(link));
if (state & PCIE_LINK_STATE_CLKPM)
@@ -1413,20 +1423,7 @@ static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
if (!locked)
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
- link->aspm_default = 0;
- if (state & PCIE_LINK_STATE_L0S)
- link->aspm_default |= PCIE_LINK_STATE_L0S;
- if (state & PCIE_LINK_STATE_L1)
- link->aspm_default |= PCIE_LINK_STATE_L1;
- /* L1 PM substates require L1 */
- if (state & PCIE_LINK_STATE_L1_1)
- link->aspm_default |= PCIE_LINK_STATE_L1_1 | PCIE_LINK_STATE_L1;
- if (state & PCIE_LINK_STATE_L1_2)
- link->aspm_default |= PCIE_LINK_STATE_L1_2 | PCIE_LINK_STATE_L1;
- if (state & PCIE_LINK_STATE_L1_1_PCIPM)
- link->aspm_default |= PCIE_LINK_STATE_L1_1_PCIPM | PCIE_LINK_STATE_L1;
- if (state & PCIE_LINK_STATE_L1_2_PCIPM)
- link->aspm_default |= PCIE_LINK_STATE_L1_2_PCIPM | PCIE_LINK_STATE_L1;
+ link->aspm_default = pci_calc_aspm_enable_mask(state);
pcie_config_aspm_link(link, policy_to_aspm_state(link));
link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0;
With only one set of defines remaining, state can be almost used as is to set ->aspm_disable/default. Only CLKPM and L1 PM substates need special handling. Remove unnecessary if conditions that can use the state variable bits directly. Move the ASPM mask calculation code into pci_calc_aspm_{disable,enable}_mask() helpers which makes it easier to alter state variable directly. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/pci/pcie/aspm.c | 51 +++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 27 deletions(-)