| Message ID | 20240302-opp_support-v8-5-158285b86b10@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: qcom: Add support for OPP | expand |
On Sat, Mar 02, 2024 at 09:29:59AM +0530, Krishna chaitanya chundru wrote: > PCIe needs to choose the appropriate performance state of RPMH power > domain and interconnect bandwidth based up on the PCIe gen speed. > > Add the OPP table support to specify RPMH performance states and > interconnect peak bandwidth. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 74 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 74 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 6b1d2e0d9d14..662f2129f20d 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -1827,7 +1827,32 @@ pcie0: pcie@1c00000 { > pinctrl-names = "default"; > pinctrl-0 = <&pcie0_default_state>; > > + operating-points-v2 = <&pcie0_opp_table>; > + > status = "disabled"; > + > + pcie0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-2500000 { Add the comments that you added below. > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; Isn't the peak bw should be greater that the avg bw? Atleast in upstream we follow that pattern. - Mani > + }; > + > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + }; > + > }; > > pcie0_phy: phy@1c06000 { > @@ -1938,7 +1963,56 @@ pcie1: pcie@1c08000 { > pinctrl-names = "default"; > pinctrl-0 = <&pcie1_default_state>; > > + operating-points-v2 = <&pcie1_opp_table>; > + > status = "disabled"; > + > + pcie1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + /* GEN 1x1 */ > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; > + }; > + > + /* GEN 1x2 GEN 2x1 */ > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + /* GEN 2x2 */ > + opp-10000000 { > + opp-hz = /bits/ 64 <10000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <1000000 1>; > + }; > + > + /* GEN 3x1 */ > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + > + /* GEN 3x2 GEN 4x1 */ > + opp-16000000 { > + opp-hz = /bits/ 64 <16000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <1969000 1>; > + }; > + > + /* GEN 4x2 */ > + opp-32000000 { > + opp-hz = /bits/ 64 <32000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <3938000 1>; > + }; > + }; > + > }; > > pcie1_phy: phy@1c0e000 { > > -- > 2.42.0 >
On 3/4/2024 11:19 PM, Manivannan Sadhasivam wrote: > On Sat, Mar 02, 2024 at 09:29:59AM +0530, Krishna chaitanya chundru wrote: >> PCIe needs to choose the appropriate performance state of RPMH power >> domain and interconnect bandwidth based up on the PCIe gen speed. >> >> Add the OPP table support to specify RPMH performance states and >> interconnect peak bandwidth. >> >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sm8450.dtsi | 74 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 74 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi >> index 6b1d2e0d9d14..662f2129f20d 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi >> @@ -1827,7 +1827,32 @@ pcie0: pcie@1c00000 { >> pinctrl-names = "default"; >> pinctrl-0 = <&pcie0_default_state>; >> >> + operating-points-v2 = <&pcie0_opp_table>; >> + >> status = "disabled"; >> + >> + pcie0_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-2500000 { > > Add the comments that you added below. ACK. > >> + opp-hz = /bits/ 64 <2500000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + opp-peak-kBps = <250000 1>; > > Isn't the peak bw should be greater that the avg bw? Atleast in upstream we > follow that pattern. > > - Mani The two values which are defined are for peak BW only one value corresponds to PCI-MEM path and other to CPU to PCIe path. - Krishna Chaitanya. > >> + }; >> + >> + opp-5000000 { >> + opp-hz = /bits/ 64 <5000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + opp-peak-kBps = <500000 1>; >> + }; >> + >> + opp-8000000 { >> + opp-hz = /bits/ 64 <8000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + opp-peak-kBps = <984500 1>; >> + }; >> + }; >> + >> }; >> >> pcie0_phy: phy@1c06000 { >> @@ -1938,7 +1963,56 @@ pcie1: pcie@1c08000 { >> pinctrl-names = "default"; >> pinctrl-0 = <&pcie1_default_state>; >> >> + operating-points-v2 = <&pcie1_opp_table>; >> + >> status = "disabled"; >> + >> + pcie1_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + /* GEN 1x1 */ >> + opp-2500000 { >> + opp-hz = /bits/ 64 <2500000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + opp-peak-kBps = <250000 1>; >> + }; >> + >> + /* GEN 1x2 GEN 2x1 */ >> + opp-5000000 { >> + opp-hz = /bits/ 64 <5000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + opp-peak-kBps = <500000 1>; >> + }; >> + >> + /* GEN 2x2 */ >> + opp-10000000 { >> + opp-hz = /bits/ 64 <10000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + opp-peak-kBps = <1000000 1>; >> + }; >> + >> + /* GEN 3x1 */ >> + opp-8000000 { >> + opp-hz = /bits/ 64 <8000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + opp-peak-kBps = <984500 1>; >> + }; >> + >> + /* GEN 3x2 GEN 4x1 */ >> + opp-16000000 { >> + opp-hz = /bits/ 64 <16000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + opp-peak-kBps = <1969000 1>; >> + }; >> + >> + /* GEN 4x2 */ >> + opp-32000000 { >> + opp-hz = /bits/ 64 <32000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + opp-peak-kBps = <3938000 1>; >> + }; >> + }; >> + >> }; >> >> pcie1_phy: phy@1c0e000 { >> >> -- >> 2.42.0 >> >
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 6b1d2e0d9d14..662f2129f20d 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1827,7 +1827,32 @@ pcie0: pcie@1c00000 { pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + }; + }; pcie0_phy: phy@1c06000 { @@ -1938,7 +1963,56 @@ pcie1: pcie@1c08000 { pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1x2 GEN 2x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3x2 GEN 4x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + }; pcie1_phy: phy@1c0e000 {
PCIe needs to choose the appropriate performance state of RPMH power domain and interconnect bandwidth based up on the PCIe gen speed. Add the OPP table support to specify RPMH performance states and interconnect peak bandwidth. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 74 ++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+)