| Message ID | 20240108-dt-bindings-pci-qcom-split-v1-1-d541f05f4de0@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: PCI: qcom: move to dedicated schema (part one) | expand |
On Mon, Jan 08, 2024 at 03:19:14PM +0100, Krzysztof Kozlowski wrote: > The qcom,pcie.yaml binding file containing all possible Qualcomm SoC > PCIe root complexes gets quite complicated with numerous if:then: > conditions customizing clocks, interrupts, regs and resets. Adding and > reviewing new devices is difficult, so simplify it by having shared > common binding and file with only one group of compatible devices: > > 1. Copy all common qcom,pcie.yaml properties (so everything except > supplies) to a new shared qcom,pcie-common.yaml schema. > 2. Move SM8550 PCIe compatible devices to dedicated binding file. > > This creates equivalent SM8550 schema file, except missing required > compatible which is actually redundant. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../devicetree/bindings/pci/qcom,pcie-common.yaml | 98 ++++++++++++ > .../devicetree/bindings/pci/qcom,pcie-sm8550.yaml | 171 +++++++++++++++++++++ > .../devicetree/bindings/pci/qcom,pcie.yaml | 38 ----- > 3 files changed, 269 insertions(+), 38 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml > new file mode 100644 > index 000000000000..125136176f93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PCI Express Root Complex Common Properties > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + > +properties: > + reg: > + minItems: 4 > + maxItems: 6 > + > + reg-names: > + minItems: 4 > + maxItems: 6 > + > + interrupts: > + minItems: 1 > + maxItems: 8 > + > + interrupt-names: > + minItems: 1 > + maxItems: 8 > + > + iommu-map: > + minItems: 1 > + maxItems: 16 > + > + clocks: > + minItems: 3 > + maxItems: 13 > + > + clock-names: > + minItems: 3 > + maxItems: 13 > + > + dma-coherent: true > + > + interconnects: > + maxItems: 2 > + > + interconnect-names: > + items: > + - const: pcie-mem > + - const: cpu-pcie > + > + phys: > + maxItems: 1 > + > + phy-names: > + items: > + - const: pciephy > + > + power-domains: > + maxItems: 1 > + > + resets: > + minItems: 1 > + maxItems: 12 > + > + reset-names: > + minItems: 1 > + maxItems: 12 > + > + perst-gpios: > + description: GPIO controlled connection to PERST# signal > + maxItems: 1 > + > + wake-gpios: > + description: GPIO controlled connection to WAKE# signal > + maxItems: 1 > + > +required: > + - reg > + - reg-names > + - interrupt-map-mask > + - interrupt-map > + - clocks > + - clock-names > + > +anyOf: > + - required: > + - interrupts > + - interrupt-names > + - "#interrupt-cells" > + - required: > + - msi-map > + - msi-map-mask > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml > new file mode 100644 > index 000000000000..b6d025f153bc > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml > @@ -0,0 +1,171 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM8550 PCI Express Root Complex > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + > +description: > + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on > + the Synopsys DesignWare PCIe IP. > + > +properties: > + compatible: > + oneOf: > + - const: qcom,pcie-sm8550 > + - items: > + - enum: > + - qcom,pcie-sm8650 > + - const: qcom,pcie-sm8550 > + > + reg: > + minItems: 5 > + maxItems: 6 > + > + reg-names: > + minItems: 5 > + items: > + - const: parf # Qualcomm specific registers > + - const: dbi # DesignWare PCIe registers > + - const: elbi # External local bus interface registers > + - const: atu # ATU address space > + - const: config # PCIe configuration space > + - const: mhi # MHI registers > + > + clocks: > + minItems: 7 > + maxItems: 8 > + > + clock-names: > + minItems: 7 > + items: > + - const: aux # Auxiliary clock > + - const: cfg # Configuration clock > + - const: bus_master # Master AXI clock > + - const: bus_slave # Slave AXI clock > + - const: slave_q2a # Slave Q2A clock > + - const: ddrss_sf_tbu # PCIe SF TBU clock > + - const: noc_aggr # Aggre NoC PCIe AXI clock > + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock > + > + resets: > + minItems: 1 > + maxItems: 2 > + > + reset-names: > + minItems: 1 > + items: > + - const: pci # PCIe core reset > + - const: link_down # PCIe link down reset > + > +oneOf: > + - properties: > + interrupts: > + maxItems: 1 > + interrupt-names: > + items: > + - const: msi > + > + - properties: > + interrupts: > + minItems: 8 > + interrupt-names: > + items: > + - const: msi0 > + - const: msi1 > + - const: msi2 > + - const: msi3 > + - const: msi4 > + - const: msi5 > + - const: msi6 > + - const: msi7 How does a given SoC have 1 or 8 interrupts? I guess it is possible. A comment here would be helpful. Reviewed-by: Rob Herring <robh@kernel.org>
On Tue, Jan 16, 2024 at 08:44:19AM -0600, Rob Herring wrote: > On Mon, Jan 08, 2024 at 03:19:14PM +0100, Krzysztof Kozlowski wrote: > > The qcom,pcie.yaml binding file containing all possible Qualcomm SoC > > PCIe root complexes gets quite complicated with numerous if:then: > > conditions customizing clocks, interrupts, regs and resets. Adding and > > reviewing new devices is difficult, so simplify it by having shared > > common binding and file with only one group of compatible devices: > > > > 1. Copy all common qcom,pcie.yaml properties (so everything except > > supplies) to a new shared qcom,pcie-common.yaml schema. > > 2. Move SM8550 PCIe compatible devices to dedicated binding file. > > > > This creates equivalent SM8550 schema file, except missing required > > compatible which is actually redundant. > > > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > .../devicetree/bindings/pci/qcom,pcie-common.yaml | 98 ++++++++++++ > > .../devicetree/bindings/pci/qcom,pcie-sm8550.yaml | 171 +++++++++++++++++++++ > > .../devicetree/bindings/pci/qcom,pcie.yaml | 38 ----- > > 3 files changed, 269 insertions(+), 38 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml > > new file mode 100644 > > index 000000000000..125136176f93 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml > > @@ -0,0 +1,98 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm PCI Express Root Complex Common Properties > > + > > +maintainers: > > + - Bjorn Andersson <andersson@kernel.org> > > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > + > > +properties: > > + reg: > > + minItems: 4 > > + maxItems: 6 > > + > > + reg-names: > > + minItems: 4 > > + maxItems: 6 > > + > > + interrupts: > > + minItems: 1 > > + maxItems: 8 > > + > > + interrupt-names: > > + minItems: 1 > > + maxItems: 8 > > + > > + iommu-map: > > + minItems: 1 > > + maxItems: 16 > > + > > + clocks: > > + minItems: 3 > > + maxItems: 13 > > + > > + clock-names: > > + minItems: 3 > > + maxItems: 13 > > + > > + dma-coherent: true > > + > > + interconnects: > > + maxItems: 2 > > + > > + interconnect-names: > > + items: > > + - const: pcie-mem > > + - const: cpu-pcie > > + > > + phys: > > + maxItems: 1 > > + > > + phy-names: > > + items: > > + - const: pciephy > > + > > + power-domains: > > + maxItems: 1 > > + > > + resets: > > + minItems: 1 > > + maxItems: 12 > > + > > + reset-names: > > + minItems: 1 > > + maxItems: 12 > > + > > + perst-gpios: > > + description: GPIO controlled connection to PERST# signal > > + maxItems: 1 > > + > > + wake-gpios: > > + description: GPIO controlled connection to WAKE# signal > > + maxItems: 1 > > + > > +required: > > + - reg > > + - reg-names > > + - interrupt-map-mask > > + - interrupt-map > > + - clocks > > + - clock-names > > + > > +anyOf: > > + - required: > > + - interrupts > > + - interrupt-names > > + - "#interrupt-cells" > > + - required: > > + - msi-map > > + - msi-map-mask > > + > > +allOf: > > + - $ref: /schemas/pci/pci-bus.yaml# > > + > > +additionalProperties: true > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml > > new file mode 100644 > > index 000000000000..b6d025f153bc > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml > > @@ -0,0 +1,171 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm SM8550 PCI Express Root Complex > > + > > +maintainers: > > + - Bjorn Andersson <andersson@kernel.org> > > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > + > > +description: > > + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on > > + the Synopsys DesignWare PCIe IP. > > + > > +properties: > > + compatible: > > + oneOf: > > + - const: qcom,pcie-sm8550 > > + - items: > > + - enum: > > + - qcom,pcie-sm8650 > > + - const: qcom,pcie-sm8550 > > + > > + reg: > > + minItems: 5 > > + maxItems: 6 > > + > > + reg-names: > > + minItems: 5 > > + items: > > + - const: parf # Qualcomm specific registers > > + - const: dbi # DesignWare PCIe registers > > + - const: elbi # External local bus interface registers > > + - const: atu # ATU address space > > + - const: config # PCIe configuration space > > + - const: mhi # MHI registers > > + > > + clocks: > > + minItems: 7 > > + maxItems: 8 > > + > > + clock-names: > > + minItems: 7 > > + items: > > + - const: aux # Auxiliary clock > > + - const: cfg # Configuration clock > > + - const: bus_master # Master AXI clock > > + - const: bus_slave # Slave AXI clock > > + - const: slave_q2a # Slave Q2A clock > > + - const: ddrss_sf_tbu # PCIe SF TBU clock > > + - const: noc_aggr # Aggre NoC PCIe AXI clock > > + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock > > + > > + resets: > > + minItems: 1 > > + maxItems: 2 > > + > > + reset-names: > > + minItems: 1 > > + items: > > + - const: pci # PCIe core reset > > + - const: link_down # PCIe link down reset > > + > > +oneOf: > > + - properties: > > + interrupts: > > + maxItems: 1 > > + interrupt-names: > > + items: > > + - const: msi > > + > > + - properties: > > + interrupts: > > + minItems: 8 > > + interrupt-names: > > + items: > > + - const: msi0 > > + - const: msi1 > > + - const: msi2 > > + - const: msi3 > > + - const: msi4 > > + - const: msi5 > > + - const: msi6 > > + - const: msi7 > > How does a given SoC have 1 or 8 interrupts? I guess it is possible. A > comment here would be helpful. > No, this is due to kernel developers not able to find out the max MSI numbers for each platforms out of the Qcom internal documentation. Let it be for now, I will try to fetch these numbers to make it accurate later. - Mani > Reviewed-by: Rob Herring <robh@kernel.org> >
On 17/01/2024 07:30, Manivannan Sadhasivam wrote: >> >> How does a given SoC have 1 or 8 interrupts? I guess it is possible. A >> comment here would be helpful. >> > > No, this is due to kernel developers not able to find out the max MSI numbers > for each platforms out of the Qcom internal documentation. > > Let it be for now, I will try to fetch these numbers to make it accurate later. I'll complete the interrupts the binding and the DTS. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml new file mode 100644 index 000000000000..125136176f93 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCI Express Root Complex Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + reg: + minItems: 4 + maxItems: 6 + + reg-names: + minItems: 4 + maxItems: 6 + + interrupts: + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 + + iommu-map: + minItems: 1 + maxItems: 16 + + clocks: + minItems: 3 + maxItems: 13 + + clock-names: + minItems: 3 + maxItems: 13 + + dma-coherent: true + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: pcie-mem + - const: cpu-pcie + + phys: + maxItems: 1 + + phy-names: + items: + - const: pciephy + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + perst-gpios: + description: GPIO controlled connection to PERST# signal + maxItems: 1 + + wake-gpios: + description: GPIO controlled connection to WAKE# signal + maxItems: 1 + +required: + - reg + - reg-names + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + +anyOf: + - required: + - interrupts + - interrupt-names + - "#interrupt-cells" + - required: + - msi-map + - msi-map-mask + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml new file mode 100644 index 000000000000..b6d025f153bc --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 PCI Express Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on + the Synopsys DesignWare PCIe IP. + +properties: + compatible: + oneOf: + - const: qcom,pcie-sm8550 + - items: + - enum: + - qcom,pcie-sm8650 + - const: qcom,pcie-sm8550 + + reg: + minItems: 5 + maxItems: 6 + + reg-names: + minItems: 5 + items: + - const: parf # Qualcomm specific registers + - const: dbi # DesignWare PCIe registers + - const: elbi # External local bus interface registers + - const: atu # ATU address space + - const: config # PCIe configuration space + - const: mhi # MHI registers + + clocks: + minItems: 7 + maxItems: 8 + + clock-names: + minItems: 7 + items: + - const: aux # Auxiliary clock + - const: cfg # Configuration clock + - const: bus_master # Master AXI clock + - const: bus_slave # Slave AXI clock + - const: slave_q2a # Slave Q2A clock + - const: ddrss_sf_tbu # PCIe SF TBU clock + - const: noc_aggr # Aggre NoC PCIe AXI clock + - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: pci # PCIe core reset + - const: link_down # PCIe link down reset + +oneOf: + - properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: msi + + - properties: + interrupts: + minItems: 8 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + +allOf: + - $ref: qcom,pcie-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1c00000 { + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + bus-range = <0x00 0xff>; + device_type = "pci"; + linux,pci-domain = <0>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr"; + + dma-coherent; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + power-domains = <&gcc PCIE_0_GDSC>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index a93ab3b54066..3b7dd9a4ef60 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -40,11 +40,6 @@ properties: - qcom,pcie-sm8350 - qcom,pcie-sm8450-pcie0 - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 - - items: - - enum: - - qcom,pcie-sm8650 - - const: qcom,pcie-sm8550 - items: - const: qcom,pcie-msm8998 - const: qcom,pcie-msm8996 @@ -226,7 +221,6 @@ allOf: - qcom,pcie-sm8350 - qcom,pcie-sm8450-pcie0 - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: properties: reg: @@ -715,37 +709,6 @@ allOf: items: - const: pci # PCIe core reset - - if: - properties: - compatible: - contains: - enum: - - qcom,pcie-sm8550 - then: - properties: - clocks: - minItems: 7 - maxItems: 8 - clock-names: - minItems: 7 - items: - - const: aux # Auxiliary clock - - const: cfg # Configuration clock - - const: bus_master # Master AXI clock - - const: bus_slave # Slave AXI clock - - const: slave_q2a # Slave Q2A clock - - const: ddrss_sf_tbu # PCIe SF TBU clock - - const: noc_aggr # Aggre NoC PCIe AXI clock - - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock - resets: - minItems: 1 - maxItems: 2 - reset-names: - minItems: 1 - items: - - const: pci # PCIe core reset - - const: link_down # PCIe link down reset - - if: properties: compatible: @@ -883,7 +846,6 @@ allOf: - qcom,pcie-sm8350 - qcom,pcie-sm8450-pcie0 - qcom,pcie-sm8450-pcie1 - - qcom,pcie-sm8550 then: oneOf: - properties:
The qcom,pcie.yaml binding file containing all possible Qualcomm SoC PCIe root complexes gets quite complicated with numerous if:then: conditions customizing clocks, interrupts, regs and resets. Adding and reviewing new devices is difficult, so simplify it by having shared common binding and file with only one group of compatible devices: 1. Copy all common qcom,pcie.yaml properties (so everything except supplies) to a new shared qcom,pcie-common.yaml schema. 2. Move SM8550 PCIe compatible devices to dedicated binding file. This creates equivalent SM8550 schema file, except missing required compatible which is actually redundant. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/pci/qcom,pcie-common.yaml | 98 ++++++++++++ .../devicetree/bindings/pci/qcom,pcie-sm8550.yaml | 171 +++++++++++++++++++++ .../devicetree/bindings/pci/qcom,pcie.yaml | 38 ----- 3 files changed, 269 insertions(+), 38 deletions(-)