| Message ID | 20231004170214.474792-1-jesse.brandeburg@intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | [iwl-net,v3] ice: reset first in crash dump kernels | expand |
> -----Original Message----- > From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of Jesse Brandeburg > Sent: Wednesday, October 4, 2023 10:32 PM > To: intel-wired-lan@lists.osuosl.org > Cc: pmenzel@molgen.mpg.de; Vishal Agrawal <vagrawal@redhat.com>; linux-pci@vger.kernel.org; Brandeburg, Jesse <jesse.brandeburg@intel.com>; netdev@vger.kernel.org; jkc@redhat.com; Kitszel, Przemyslaw <przemyslaw.kitszel@intel.com> > Subject: [Intel-wired-lan] [PATCH iwl-net v3] ice: reset first in crash dump kernels > > When the system boots into the crash dump kernel after a panic, the ice > networking device may still have pending transactions that can cause errors > or machine checks when the device is re-enabled. This can prevent the crash > dump kernel from loading the driver or collecting the crash data. > > To avoid this issue, perform a function level reset (FLR) on the ice device > via PCIe config space before enabling it on the crash kernel. This will > clear any outstanding transactions and stop all queues and interrupts. > Restore the config space after the FLR, otherwise it was found in testing > that the driver wouldn't load successfully. > > The following sequence causes the original issue: > - Load the ice driver with modprobe ice > - Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs > - Trigger a crash with echo c > /proc/sysrq-trigger > - Load the ice driver again (or let it load automatically) with modprobe ice > - The system crashes again during pcim_enable_device() > > Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") > > Reported-by: Vishal Agrawal <vagrawal@redhat.com> > Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> > Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> > Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> > --- > v3: add Fixes tag as approximate, added Jay's RB tag > v2: respond to list comments and update commit message > v1: initial version > --- > drivers/net/ethernet/intel/ice/ice_main.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index c8286adae946..6550c46e4e36 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -6,6 +6,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <generated/utsrelease.h> +#include <linux/crash_dump.h> #include "ice.h" #include "ice_base.h" #include "ice_lib.h" @@ -5014,6 +5015,20 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) return -EINVAL; } + /* when under a kdump kernel initiate a reset before enabling the + * device in order to clear out any pending DMA transactions. These + * transactions can cause some systems to machine check when doing + * the pcim_enable_device() below. + */ + if (is_kdump_kernel()) { + pci_save_state(pdev); + pci_clear_master(pdev); + err = pcie_flr(pdev); + if (err) + return err; + pci_restore_state(pdev); + } + /* this driver uses devres, see * Documentation/driver-api/driver-model/devres.rst */
When the system boots into the crash dump kernel after a panic, the ice networking device may still have pending transactions that can cause errors or machine checks when the device is re-enabled. This can prevent the crash dump kernel from loading the driver or collecting the crash data. To avoid this issue, perform a function level reset (FLR) on the ice device via PCIe config space before enabling it on the crash kernel. This will clear any outstanding transactions and stop all queues and interrupts. Restore the config space after the FLR, otherwise it was found in testing that the driver wouldn't load successfully. The following sequence causes the original issue: - Load the ice driver with modprobe ice - Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs - Trigger a crash with echo c > /proc/sysrq-trigger - Load the ice driver again (or let it load automatically) with modprobe ice - The system crashes again during pcim_enable_device() Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Reported-by: Vishal Agrawal <vagrawal@redhat.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> --- v3: add Fixes tag as approximate, added Jay's RB tag v2: respond to list comments and update commit message v1: initial version --- drivers/net/ethernet/intel/ice/ice_main.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) base-commit: 6a70e5cbedaf8ad10528ac9ac114f3ec20f422df