@@ -34,7 +34,7 @@
#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
#define PCIE_SSDEV_ID_OFF 0x002c
#define PCIE_CAP_PCIEXP 0x0060
-#define PCIE_HEADER_LOG_4_OFF 0x0128
+#define PCIE_CAP_PCIERR_OFF 0x0100
#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
@@ -603,6 +603,37 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
return PCI_BRIDGE_EMUL_HANDLED;
}
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_ext_conf_read(struct pci_bridge_emul *bridge,
+ int reg, u32 *value)
+{
+ struct mvebu_pcie_port *port = bridge->data;
+
+ switch (reg) {
+ case 0:
+ case PCI_ERR_UNCOR_STATUS:
+ case PCI_ERR_UNCOR_MASK:
+ case PCI_ERR_UNCOR_SEVER:
+ case PCI_ERR_COR_STATUS:
+ case PCI_ERR_COR_MASK:
+ case PCI_ERR_CAP:
+ case PCI_ERR_HEADER_LOG+0:
+ case PCI_ERR_HEADER_LOG+4:
+ case PCI_ERR_HEADER_LOG+8:
+ case PCI_ERR_HEADER_LOG+12:
+ case PCI_ERR_ROOT_COMMAND:
+ case PCI_ERR_ROOT_STATUS:
+ case PCI_ERR_ROOT_ERR_SRC:
+ *value = mvebu_readl(port, PCIE_CAP_PCIERR_OFF + reg);
+ break;
+
+ default:
+ return PCI_BRIDGE_EMUL_NOT_HANDLED;
+ }
+
+ return PCI_BRIDGE_EMUL_HANDLED;
+}
+
static void
mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
int reg, u32 old, u32 new, u32 mask)
@@ -715,11 +746,45 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
}
}
+static void
+mvebu_pci_bridge_emul_ext_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
+{
+ struct mvebu_pcie_port *port = bridge->data;
+
+ switch (reg) {
+ /* These are W1C registers, so clear other bits */
+ case PCI_ERR_UNCOR_STATUS:
+ case PCI_ERR_COR_STATUS:
+ case PCI_ERR_ROOT_STATUS:
+ new &= mask;
+ fallthrough;
+
+ case PCI_ERR_UNCOR_MASK:
+ case PCI_ERR_UNCOR_SEVER:
+ case PCI_ERR_COR_MASK:
+ case PCI_ERR_CAP:
+ case PCI_ERR_HEADER_LOG+0:
+ case PCI_ERR_HEADER_LOG+4:
+ case PCI_ERR_HEADER_LOG+8:
+ case PCI_ERR_HEADER_LOG+12:
+ case PCI_ERR_ROOT_COMMAND:
+ case PCI_ERR_ROOT_ERR_SRC:
+ mvebu_writel(port, new, PCIE_CAP_PCIERR_OFF + reg);
+ break;
+
+ default:
+ break;
+ }
+}
+
static const struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
.read_base = mvebu_pci_bridge_emul_base_conf_read,
.write_base = mvebu_pci_bridge_emul_base_conf_write,
.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
+ .read_ext = mvebu_pci_bridge_emul_ext_conf_read,
+ .write_ext = mvebu_pci_bridge_emul_ext_conf_write,
};
/*
AER registers start at mvebu offset 0x0100. Registers PCI_ERR_ROOT_COMMAND, PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC are not supported on pre-XP hardware and returns zeros. Note that AER interrupt is not supported yet as mvebu emulated bridge does not implement interrupts support at all yet. Also remove custom macro PCIE_HEADER_LOG_4_OFF as it is unused and correctly this register should be referenced via standard macros with offset, e.g. as: PCIE_CAP_PCIERR_OFF + PCI_ERR_HEADER_LOG + 4. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/pci/controller/pci-mvebu.c | 67 +++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-)