diff mbox series

[2/5] PCI: Move loongson pci quirks to quirks.c

Message ID 20210514080025.1828197-3-chenhuacai@loongson.cn
State New
Headers show
Series PCI: Loongson-related pci quirks | expand

Commit Message

陈华才 May 14, 2021, 8 a.m. UTC 
Loongson PCH (LS7A chipset) will be used by both MIPS-based and
LoongArch-based Loongson processors. MIPS-based Loongson uses FDT
but LoongArch-base Loongson uses ACPI, but the driver in drivers/
pci/controller/pci-loongson.c is FDT-only. So move the quirks to
quirks.c where can be shared by all architectures.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 drivers/pci/controller/pci-loongson.c | 69 ---------------------------
 drivers/pci/quirks.c                  | 69 +++++++++++++++++++++++++++
 2 files changed, 69 insertions(+), 69 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index 48169b1e3817..88066e9db69e 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -12,15 +12,6 @@ 
 
 #include "../pci.h"
 
-/* Device IDs */
-#define DEV_PCIE_PORT_0	0x7a09
-#define DEV_PCIE_PORT_1	0x7a19
-#define DEV_PCIE_PORT_2	0x7a29
-
-#define DEV_LS2K_APB	0x7a02
-#define DEV_LS7A_CONF	0x7a10
-#define DEV_LS7A_LPC	0x7a0c
-
 #define FLAG_CFG0	BIT(0)
 #define FLAG_CFG1	BIT(1)
 #define FLAG_DEV_FIX	BIT(2)
@@ -32,66 +23,6 @@  struct loongson_pci {
 	u32 flags;
 };
 
-/* Fixup wrong class code in PCIe bridges */
-static void bridge_class_quirk(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_PCIE_PORT_0, bridge_class_quirk);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_PCIE_PORT_1, bridge_class_quirk);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_PCIE_PORT_2, bridge_class_quirk);
-
-static void system_bus_quirk(struct pci_dev *pdev)
-{
-	/*
-	 * The address space consumed by these devices is outside the
-	 * resources of the host bridge.
-	 */
-	pdev->mmio_always_on = 1;
-	pdev->non_compliant_bars = 1;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_LS2K_APB, system_bus_quirk);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_LS7A_CONF, system_bus_quirk);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
-			DEV_LS7A_LPC, system_bus_quirk);
-
-static void loongson_mrrs_quirk(struct pci_dev *dev)
-{
-	struct pci_bus *bus = dev->bus;
-	struct pci_dev *bridge;
-	static const struct pci_device_id bridge_devids[] = {
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
-		{ 0, },
-	};
-
-	/* look for the matching bridge */
-	while (!pci_is_root_bus(bus)) {
-		bridge = bus->self;
-		bus = bus->parent;
-		/*
-		 * Some Loongson PCIe ports have a h/w limitation of
-		 * 256 bytes maximum read request size. They can't handle
-		 * anything larger than this. So force this limit on
-		 * any devices attached under these ports.
-		 */
-		if (pci_match_id(bridge_devids, bridge)) {
-			if (pcie_get_readrq(dev) > 256) {
-				pci_info(dev, "limiting MRRS to 256\n");
-				pcie_set_readrq(dev, 256);
-			}
-			break;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
-
 static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
 				unsigned int devfn, int where)
 {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dcb229de1acb..66e4bea69431 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -205,6 +205,75 @@  static void quirk_mmio_always_on(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
 
+/* Loongson-related quirks */
+#define DEV_PCIE_PORT_0	0x7a09
+#define DEV_PCIE_PORT_1	0x7a19
+#define DEV_PCIE_PORT_2	0x7a29
+
+#define DEV_LS2K_APB	0x7a02
+#define DEV_LS7A_CONF	0x7a10
+#define DEV_LS7A_LPC	0x7a0c
+
+/* Fixup wrong class code in PCIe bridges */
+static void loongson_bridge_class_quirk(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_0, loongson_bridge_class_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_1, loongson_bridge_class_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_2, loongson_bridge_class_quirk);
+
+static void loongson_system_bus_quirk(struct pci_dev *pdev)
+{
+	/*
+	 * The address space consumed by these devices is outside the
+	 * resources of the host bridge.
+	 */
+	pdev->mmio_always_on = 1;
+	pdev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS2K_APB, loongson_system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS7A_CONF, loongson_system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS7A_LPC, loongson_system_bus_quirk);
+
+static void loongson_mrrs_quirk(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+	struct pci_dev *bridge;
+	static const struct pci_device_id bridge_devids[] = {
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
+		{ 0, },
+	};
+
+	/* look for the matching bridge */
+	while (!pci_is_root_bus(bus)) {
+		bridge = bus->self;
+		bus = bus->parent;
+		/*
+		 * Some Loongson PCIe ports have a h/w limitation of
+		 * 256 bytes maximum read request size. They can't handle
+		 * anything larger than this. So force this limit on
+		 * any devices attached under these ports.
+		 */
+		if (pci_match_id(bridge_devids, bridge)) {
+			if (pcie_get_readrq(dev) > 256) {
+				pci_info(dev, "limiting MRRS to 256\n");
+				pcie_set_readrq(dev, 256);
+			}
+			break;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
+
 /*
  * The Mellanox Tavor device gives false positive parity errors.  Disable
  * parity error reporting.