diff mbox series

[v4,08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe

Message ID 20171103134722.5532-9-niklas.cassel@axis.com
State Superseded
Headers show
Series dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support | expand

Commit Message

Niklas Cassel Nov. 3, 2017, 1:47 p.m. UTC 
Assign pp->ops in *_add_pcie_port() to match how it is done in other
drivers like exynos, imx7, keystone, armada8k, artpec6, designware-plat,
hisi, kirin and spear13xx.

This is probably a remainder since when dev and ops were assigned as
members to pp. Since we now assign them as members to struct dw_pcie,
the pp->ops assignment should definitely be in dra7xx_add_pcie_port().

This is done so that the compiler (in a later commit) can remove more
code when enabling only one of the two supported modes (host/ep) in
the dra7xx driver.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/dwc/pci-dra7xx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index a743545da4d4..009f6aeeee1c 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -460,6 +460,8 @@  static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 	if (!pci->dbi_base)
 		return -ENOMEM;
 
+	pp->ops = &dra7xx_pcie_host_ops;
+
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "failed to initialize host\n");
@@ -588,7 +590,6 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct resource *res;
 	struct dw_pcie *pci;
-	struct pcie_port *pp;
 	struct dra7xx_pcie *dra7xx;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
@@ -616,9 +617,6 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
-	pp = &pci->pp;
-	pp->ops = &dra7xx_pcie_host_ops;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "missing IRQ resource: %d\n", irq);