@@ -101,8 +101,14 @@ int pciehp_unconfigure_device(struct slot *p_slot)
*/
list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
bus_list) {
+ bool present;
+
pci_dev_get(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
+
+ /* Check if the device is really there anymore */
+ present = presence ? pci_device_is_present(dev) : false;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && present) {
pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
ctrl_err(ctrl,
@@ -113,7 +119,7 @@ int pciehp_unconfigure_device(struct slot *p_slot)
break;
}
}
- if (!presence) {
+ if (!present) {
pci_dev_set_disconnected(dev, NULL);
if (pci_has_subordinate(dev))
pci_walk_bus(dev->subordinate,
@@ -124,7 +130,7 @@ int pciehp_unconfigure_device(struct slot *p_slot)
* Ensure that no new Requests will be generated from
* the device.
*/
- if (presence) {
+ if (present) {
pci_read_config_word(dev, PCI_COMMAND, &command);
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
command |= PCI_COMMAND_INTX_DISABLE;
During surprise hot-unplug the device is not there anymore. When that happens we read 0xffffffff from the registers and pciehp_unconfigure_device() inadvertently thinks the device is a display device because bridge control register returns 0xff refusing to remove it: pciehp 0000:00:1c.0:pcie004: Slot(0): Link Down pciehp 0000:00:1c.0:pcie004: Slot(0): Card present pciehp 0000:00:1c.0:pcie004: Cannot remove display device 0000:01:00.0 This causes the hotplug functionality to leave the hierarcy untouched preventing further hotplug operations. To fix this verify presence of a device by calling pci_device_is_present() for it before we touch it any further. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/pci/hotplug/pciehp_pci.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)