diff mbox

[1/3] arm64: dts: hi3660: add pcie node

Message ID 20170515062745.70082-1-songxiaowei@hisilicon.com
State Superseded
Headers show

Commit Message

Songxiaowei (Kirin_DRV) May 15, 2017, 6:27 a.m. UTC
Add PCIe node for hi3660, and add binding documentation.

Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Song Xiaowei <songxiaowei@hisilicon.com>
---
 .../devicetree/bindings/pci/hisilicon-pcie.txt     | 52 ++++++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi          | 31 +++++++++++++
 2 files changed, 83 insertions(+)

Comments

Niklas Cassel May 15, 2017, 8:19 a.m. UTC | #1
Hello Song


You forgot to add the device tree maintainers
and the device tree mailing list to this patch.

If you use ./scripts/get_maintainer.pl <patch>
it will show you this information.


Regards,
Niklas


On 05/15/2017 08:27 AM, Song Xiaowei wrote:
> Add PCIe node for hi3660, and add binding documentation.
> 
> Cc: Guodong Xu <guodong.xu@linaro.org>
> Signed-off-by: Song Xiaowei <songxiaowei@hisilicon.com>
> ---
>  .../devicetree/bindings/pci/hisilicon-pcie.txt     | 52 ++++++++++++++++++++++
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi          | 31 +++++++++++++
>  2 files changed, 83 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index a339dbb15493..71491178c86c 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -85,3 +85,55 @@ Example:
>  				 0x0 0 0 4 &mbigen_pcie0 650 4>;
>  		status = "ok";
>  	};
> +
> +
> +
> +HiSilicon Kirin SoC PCIe host DT description
> +
> +Kirin PCIe host controller is also based on Designware PCI core.
> +It shares common functions with PCIe Designware core driver and inherits
> +common properties defined in
> +Documentation/devicetree/bindings/pci/designware-pci.txt.
> +
> +Additional properties are described here:
> +
> +Required properties
> +- compatible: Should contain "hisilicon,kirin-pcie".
> +- reg: Should contain rc_dbi, apb, phy, config registers location and length.
> +- reg-names: Must include the following entries:
> +  "dbi": controller configuration registers;
> +  "apb": apb Ctrl register;
> +  "phy": apb PHY register;
> +  "config": PCIe configuration space registers.
> +- reset-gpio: perst assert/deassert gpio
> +
> +Optional properties:
> +- status: Either "ok" or "disabled".
> +
> +Kirin960 Example:
> +        kirin_pcie@f4000000 {
> +                        compatible = "hisilicon,kirin-pcie";
> +                        reg =  <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
> +                                 <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF5000000 0 0x2000>;
> +                        reg-names = "dbi","apb","phy", "config";
> +                        bus-range = <0x0  0x1>;
> +                        #address-cells = <3>;
> +                        #size-cells = <2>;
> +                        device_type = "pci";
> +                        ranges = <0x02000000 0x0 0x00000000 0x0 0xf6000000 0x0 0x2000000>;
> +                        num-lanes = <1>;
> +                        #interrupt-cells = <1>;
> +                        interrupt-map-mask = <0xf800 0 0 7>;
> +			interrupt-map = <0x0 0 0 2 &gic 0 0 0  283 4>,
> +                                        <0x0 0 0 3 &gic 0 0 0  284 4>,
> +                                        <0x0 0 0 4 &gic 0 0 0  285 4>;
> +                        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
> +                                <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
> +                                <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
> +                                <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
> +                                <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
> +                        clock-names = "pcie_phy_ref", "pcie_aux",
> +                                "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
> +                        reset-gpio = <&gpio11 1 0 >;
> +                        status = "ok";
> +        };
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index 3983086bd67b..2406a54947df 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -156,5 +156,36 @@
>  			clock-names = "uartclk", "apb_pclk";
>  			status = "disabled";
>  		};
> +
> +		kirin_pcie@f4000000 {
> +			compatible = "hisilicon,kirin-pcie";
> +			reg =  <0x0 0xf4000000 0x0 0x1000>,
> +				<0x0 0xff3fe000 0x0 0x1000>,
> +				<0x0 0xf3f20000 0x0 0x40000>,
> +				<0x0 0xF5000000 0x0 0x2000>;
> +			reg-names = "dbi", "apb", "phy", "config";
> +			bus-range = <0x0  0x1>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			device_type = "pci";
> +			ranges = <0x02000000 0x0 0x00000000 0x0
> +				0xf6000000 0x0 0x2000000>;
> +			num-lanes = <1>;
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0xf800 0 0 7>;
> +			interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
> +				<0x0 0 0 2 &gic 0 0 0  283 4>,
> +				<0x0 0 0 3 &gic 0 0 0  284 4>,
> +				<0x0 0 0 4 &gic 0 0 0  285 4>;
> +			clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
> +				<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
> +				<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
> +				<&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
> +				<&crg_ctrl HI3660_ACLK_GATE_PCIE>;
> +			clock-names = "pcie_phy_ref", "pcie_aux",
> +				"pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
> +			reset-gpio = <&gpio11 1 0 >;
> +			status = "ok";
> +		};
>  	};
>  };
>
kernel test robot May 15, 2017, 9:18 a.m. UTC | #2
Hi Song,

[auto build test ERROR on pci/next]
[also build test ERROR on v4.12-rc1 next-20170515]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Song-Xiaowei/arm64-dts-hi3660-add-pcie-node/20170515-144035
base:   https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/hisilicon/hi3660.dtsi:180.24-25 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Guodong Xu May 15, 2017, 9:37 a.m. UTC | #3
This PCIe node has dependencies on &crg_ctrl and &gpio11. However,
both of them are not appearing in mainline kernel tree yet. Sorry
about that. But I do have a plan to send all dts related changes to
maillist within this week, no later than this Wed (17/May). Would it
be possible you maintainers review this patch in parallel?

+Device tree maintainers.

-Guodong

>
> On Mon, May 15, 2017 at 5:18 PM, kbuild test robot <lkp@intel.com> wrote:
>>
>> Hi Song,
>>
>> [auto build test ERROR on pci/next]
>> [also build test ERROR on v4.12-rc1 next-20170515]
>> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>>
>> url:    https://github.com/0day-ci/linux/commits/Song-Xiaowei/arm64-dts-hi3660-add-pcie-node/20170515-144035
>> base:   https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git next
>> config: arm64-defconfig (attached as .config)
>> compiler: aarch64-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705
>> reproduce:
>>         wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>         chmod +x ~/bin/make.cross
>>         # save the attached .config to linux build tree
>>         make.cross ARCH=arm64
>>
>> All errors (new ones prefixed by >>):
>>
>> >> Error: arch/arm64/boot/dts/hisilicon/hi3660.dtsi:180.24-25 syntax error
>>    FATAL ERROR: Unable to parse input tree
>>
>> ---
>> 0-DAY kernel test infrastructure                Open Source Technology Center
>> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
>
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index a339dbb15493..71491178c86c 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -85,3 +85,55 @@  Example:
 				 0x0 0 0 4 &mbigen_pcie0 650 4>;
 		status = "ok";
 	};
+
+
+
+HiSilicon Kirin SoC PCIe host DT description
+
+Kirin PCIe host controller is also based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should contain "hisilicon,kirin-pcie".
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+  "dbi": controller configuration registers;
+  "apb": apb Ctrl register;
+  "phy": apb PHY register;
+  "config": PCIe configuration space registers.
+- reset-gpio: perst assert/deassert gpio
+
+Optional properties:
+- status: Either "ok" or "disabled".
+
+Kirin960 Example:
+        kirin_pcie@f4000000 {
+                        compatible = "hisilicon,kirin-pcie";
+                        reg =  <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
+                                 <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF5000000 0 0x2000>;
+                        reg-names = "dbi","apb","phy", "config";
+                        bus-range = <0x0  0x1>;
+                        #address-cells = <3>;
+                        #size-cells = <2>;
+                        device_type = "pci";
+                        ranges = <0x02000000 0x0 0x00000000 0x0 0xf6000000 0x0 0x2000000>;
+                        num-lanes = <1>;
+                        #interrupt-cells = <1>;
+                        interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 2 &gic 0 0 0  283 4>,
+                                        <0x0 0 0 3 &gic 0 0 0  284 4>,
+                                        <0x0 0 0 4 &gic 0 0 0  285 4>;
+                        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                                <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                                <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                                <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                                <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+                        clock-names = "pcie_phy_ref", "pcie_aux",
+                                "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+                        reset-gpio = <&gpio11 1 0 >;
+                        status = "ok";
+        };
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3983086bd67b..2406a54947df 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -156,5 +156,36 @@ 
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		kirin_pcie@f4000000 {
+			compatible = "hisilicon,kirin-pcie";
+			reg =  <0x0 0xf4000000 0x0 0x1000>,
+				<0x0 0xff3fe000 0x0 0x1000>,
+				<0x0 0xf3f20000 0x0 0x40000>,
+				<0x0 0xF5000000 0x0 0x2000>;
+			reg-names = "dbi", "apb", "phy", "config";
+			bus-range = <0x0  0x1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x00000000 0x0
+				0xf6000000 0x0 0x2000000>;
+			num-lanes = <1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
+				<0x0 0 0 2 &gic 0 0 0  283 4>,
+				<0x0 0 0 3 &gic 0 0 0  284 4>,
+				<0x0 0 0 4 &gic 0 0 0  285 4>;
+			clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+				<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+				<&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+				<&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+			clock-names = "pcie_phy_ref", "pcie_aux",
+				"pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+			reset-gpio = <&gpio11 1 0 >;
+			status = "ok";
+		};
 	};
 };