| Message ID | 1705669223-5655-6-git-send-email-quic_msarkar@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add Change to integrate HDMA with dwc ep driver | expand |
On Fri, Jan 19, 2024 at 06:30:21PM +0530, Mrinmay Sarkar wrote: > There is no standard way to auto detect the number of available > read/write channels in a platform. So adding this change to provide > read/write channels count and also provide "EDMA_MF_HDMA_NATIVE" > flag to support HDMA for 8775 platform. > > 8775 has IP version 1.34.0 so intruduce a new cfg(cfg_1_34_0) for > this platform. Add struct qcom_pcie_ep_cfg as match data. Assign > hdma_supported flag into struct qcom_pcie_ep_cfg and set it true > in cfg_1_34_0. > > Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> > --- > drivers/pci/controller/dwc/pcie-qcom-ep.c | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c > index 45008e0..8d56435 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c > +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c > @@ -149,6 +149,10 @@ enum qcom_pcie_ep_link_status { > QCOM_PCIE_EP_LINK_DOWN, > }; > Add kdoc comment please as like the below struct. > +struct qcom_pcie_ep_cfg { > + bool hdma_supported; > +}; > + > /** > * struct qcom_pcie_ep - Qualcomm PCIe Endpoint Controller > * @pci: Designware PCIe controller struct > @@ -167,6 +171,7 @@ enum qcom_pcie_ep_link_status { > * @num_clks: PCIe clocks count > * @perst_en: Flag for PERST enable > * @perst_sep_en: Flag for PERST separation enable > + * @cfg: PCIe EP config struct > * @link_status: PCIe Link status > * @global_irq: Qualcomm PCIe specific Global IRQ > * @perst_irq: PERST# IRQ > @@ -194,6 +199,7 @@ struct qcom_pcie_ep { > u32 perst_en; > u32 perst_sep_en; > > + const struct qcom_pcie_ep_cfg *cfg; > enum qcom_pcie_ep_link_status link_status; > int global_irq; > int perst_irq; > @@ -511,6 +517,10 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci) > pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED; > } > > +static const struct qcom_pcie_ep_cfg cfg_1_34_0 = { > + .hdma_supported = true, > +}; > + > /* Common DWC controller ops */ > static const struct dw_pcie_ops pci_ops = { > .link_up = qcom_pcie_dw_link_up, > @@ -816,6 +826,13 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev) > pcie_ep->pci.ops = &pci_ops; > pcie_ep->pci.ep.ops = &pci_ep_ops; > pcie_ep->pci.edma.nr_irqs = 1; > + > + pcie_ep->cfg = of_device_get_match_data(dev); Why do you want to cache "cfg" since it is only used in probe()? > + if (pcie_ep->cfg && pcie_ep->cfg->hdma_supported) { > + pcie_ep->pci.edma.ll_wr_cnt = 1; > + pcie_ep->pci.edma.ll_rd_cnt = 1; Is the platform really has a single r/w channel? - Mani
On 1/30/2024 2:23 PM, Manivannan Sadhasivam wrote: > On Fri, Jan 19, 2024 at 06:30:21PM +0530, Mrinmay Sarkar wrote: >> There is no standard way to auto detect the number of available >> read/write channels in a platform. So adding this change to provide >> read/write channels count and also provide "EDMA_MF_HDMA_NATIVE" >> flag to support HDMA for 8775 platform. >> >> 8775 has IP version 1.34.0 so intruduce a new cfg(cfg_1_34_0) for >> this platform. Add struct qcom_pcie_ep_cfg as match data. Assign >> hdma_supported flag into struct qcom_pcie_ep_cfg and set it true >> in cfg_1_34_0. >> >> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> >> --- >> drivers/pci/controller/dwc/pcie-qcom-ep.c | 19 ++++++++++++++++++- >> 1 file changed, 18 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c >> index 45008e0..8d56435 100644 >> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c >> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c >> @@ -149,6 +149,10 @@ enum qcom_pcie_ep_link_status { >> QCOM_PCIE_EP_LINK_DOWN, >> }; >> > Add kdoc comment please as like the below struct. > >> +struct qcom_pcie_ep_cfg { >> + bool hdma_supported; >> +}; >> + >> /** >> * struct qcom_pcie_ep - Qualcomm PCIe Endpoint Controller >> * @pci: Designware PCIe controller struct >> @@ -167,6 +171,7 @@ enum qcom_pcie_ep_link_status { >> * @num_clks: PCIe clocks count >> * @perst_en: Flag for PERST enable >> * @perst_sep_en: Flag for PERST separation enable >> + * @cfg: PCIe EP config struct >> * @link_status: PCIe Link status >> * @global_irq: Qualcomm PCIe specific Global IRQ >> * @perst_irq: PERST# IRQ >> @@ -194,6 +199,7 @@ struct qcom_pcie_ep { >> u32 perst_en; >> u32 perst_sep_en; >> >> + const struct qcom_pcie_ep_cfg *cfg; >> enum qcom_pcie_ep_link_status link_status; >> int global_irq; >> int perst_irq; >> @@ -511,6 +517,10 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci) >> pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED; >> } >> >> +static const struct qcom_pcie_ep_cfg cfg_1_34_0 = { >> + .hdma_supported = true, >> +}; >> + >> /* Common DWC controller ops */ >> static const struct dw_pcie_ops pci_ops = { >> .link_up = qcom_pcie_dw_link_up, >> @@ -816,6 +826,13 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev) >> pcie_ep->pci.ops = &pci_ops; >> pcie_ep->pci.ep.ops = &pci_ep_ops; >> pcie_ep->pci.edma.nr_irqs = 1; >> + >> + pcie_ep->cfg = of_device_get_match_data(dev); > Why do you want to cache "cfg" since it is only used in probe()? Yes Mani, no need to cache "cfg" we can use directly here . >> + if (pcie_ep->cfg && pcie_ep->cfg->hdma_supported) { >> + pcie_ep->pci.edma.ll_wr_cnt = 1; >> + pcie_ep->pci.edma.ll_rd_cnt = 1; > Is the platform really has a single r/w channel? the platform has 8 r/w channels. but as per the use case we need to use single r/w channel. > - Mani Thanks, Mrinmay
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index 45008e0..8d56435 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -149,6 +149,10 @@ enum qcom_pcie_ep_link_status { QCOM_PCIE_EP_LINK_DOWN, }; +struct qcom_pcie_ep_cfg { + bool hdma_supported; +}; + /** * struct qcom_pcie_ep - Qualcomm PCIe Endpoint Controller * @pci: Designware PCIe controller struct @@ -167,6 +171,7 @@ enum qcom_pcie_ep_link_status { * @num_clks: PCIe clocks count * @perst_en: Flag for PERST enable * @perst_sep_en: Flag for PERST separation enable + * @cfg: PCIe EP config struct * @link_status: PCIe Link status * @global_irq: Qualcomm PCIe specific Global IRQ * @perst_irq: PERST# IRQ @@ -194,6 +199,7 @@ struct qcom_pcie_ep { u32 perst_en; u32 perst_sep_en; + const struct qcom_pcie_ep_cfg *cfg; enum qcom_pcie_ep_link_status link_status; int global_irq; int perst_irq; @@ -511,6 +517,10 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci) pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED; } +static const struct qcom_pcie_ep_cfg cfg_1_34_0 = { + .hdma_supported = true, +}; + /* Common DWC controller ops */ static const struct dw_pcie_ops pci_ops = { .link_up = qcom_pcie_dw_link_up, @@ -816,6 +826,13 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev) pcie_ep->pci.ops = &pci_ops; pcie_ep->pci.ep.ops = &pci_ep_ops; pcie_ep->pci.edma.nr_irqs = 1; + + pcie_ep->cfg = of_device_get_match_data(dev); + if (pcie_ep->cfg && pcie_ep->cfg->hdma_supported) { + pcie_ep->pci.edma.ll_wr_cnt = 1; + pcie_ep->pci.edma.ll_rd_cnt = 1; + pcie_ep->pci.edma.mf = EDMA_MF_HDMA_NATIVE; + } platform_set_drvdata(pdev, pcie_ep); ret = qcom_pcie_ep_get_resources(pdev, pcie_ep); @@ -875,7 +892,7 @@ static void qcom_pcie_ep_remove(struct platform_device *pdev) } static const struct of_device_id qcom_pcie_ep_match[] = { - { .compatible = "qcom,sa8775p-pcie-ep", }, + { .compatible = "qcom,sa8775p-pcie-ep", .data = &cfg_1_34_0}, { .compatible = "qcom,sdx55-pcie-ep", }, { .compatible = "qcom,sm8450-pcie-ep", }, { }
There is no standard way to auto detect the number of available read/write channels in a platform. So adding this change to provide read/write channels count and also provide "EDMA_MF_HDMA_NATIVE" flag to support HDMA for 8775 platform. 8775 has IP version 1.34.0 so intruduce a new cfg(cfg_1_34_0) for this platform. Add struct qcom_pcie_ep_cfg as match data. Assign hdma_supported flag into struct qcom_pcie_ep_cfg and set it true in cfg_1_34_0. Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> --- drivers/pci/controller/dwc/pcie-qcom-ep.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)