diff mbox series

[2/3] PCI: dwc: Add common iATU register support

Message ID 1599814203-14441-3-git-send-email-hayashi.kunihiko@socionext.com
State New
Headers show
Series PCI: dwc: Move iATU register mapping to common framework | expand

Commit Message

Kunihiko Hayashi Sept. 11, 2020, 8:50 a.m. UTC
This gets iATU register area from reg property that has reg-names "atu".
In Synopsys DWC version 4.80 or later, since iATU register area is
separated from core register area, this area is necessary to get from
DT independently.

Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Comments

Rob Herring Sept. 23, 2020, 3:57 p.m. UTC | #1
On Fri, Sep 11, 2020 at 05:50:02PM +0900, Kunihiko Hayashi wrote:
> This gets iATU register area from reg property that has reg-names "atu".
> In Synopsys DWC version 4.80 or later, since iATU register area is
> separated from core register area, this area is necessary to get from
> DT independently.
> 
> Cc: Murali Karicheri <m-karicheri2@ti.com>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 4d105ef..4a360bc 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -10,6 +10,7 @@
>  
>  #include <linux/delay.h>
>  #include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/types.h>
>  
>  #include "../../pci.h"
> @@ -526,11 +527,16 @@ void dw_pcie_setup(struct dw_pcie *pci)
>  	u32 val;
>  	struct device *dev = pci->dev;
>  	struct device_node *np = dev->of_node;
> +	struct platform_device *pdev;
>  
>  	if (pci->version >= 0x480A || (!pci->version &&
>  				       dw_pcie_iatu_unroll_enabled(pci))) {
>  		pci->iatu_unroll_enabled = true;
> -		if (!pci->atu_base)
> +		pdev = of_find_device_by_node(np);

Use to_platform_device(dev) instead. Put that at the beginning as I'm 
going to move 'dbi' in here too.

> +		if (!pci->atu_base && pdev)
> +			pci->atu_base =
> +			    devm_platform_ioremap_resource_byname(pdev, "atu");
> +		if (IS_ERR_OR_NULL(pci->atu_base))
>  			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
>  	}
>  	dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Kunihiko Hayashi Sept. 25, 2020, 9:10 a.m. UTC | #2
Hi Rob,

On 2020/09/24 0:57, Rob Herring wrote:
> On Fri, Sep 11, 2020 at 05:50:02PM +0900, Kunihiko Hayashi wrote:
>> This gets iATU register area from reg property that has reg-names "atu".
>> In Synopsys DWC version 4.80 or later, since iATU register area is
>> separated from core register area, this area is necessary to get from
>> DT independently.
>>
>> Cc: Murali Karicheri <m-karicheri2@ti.com>
>> Cc: Jingoo Han <jingoohan1@gmail.com>
>> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>> ---
>>   drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
>>   1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
>> index 4d105ef..4a360bc 100644
>> --- a/drivers/pci/controller/dwc/pcie-designware.c
>> +++ b/drivers/pci/controller/dwc/pcie-designware.c
>> @@ -10,6 +10,7 @@
>>   
>>   #include <linux/delay.h>
>>   #include <linux/of.h>
>> +#include <linux/of_platform.h>
>>   #include <linux/types.h>
>>   
>>   #include "../../pci.h"
>> @@ -526,11 +527,16 @@ void dw_pcie_setup(struct dw_pcie *pci)
>>   	u32 val;
>>   	struct device *dev = pci->dev;
>>   	struct device_node *np = dev->of_node;
>> +	struct platform_device *pdev;
>>   
>>   	if (pci->version >= 0x480A || (!pci->version &&
>>   				       dw_pcie_iatu_unroll_enabled(pci))) {
>>   		pci->iatu_unroll_enabled = true;
>> -		if (!pci->atu_base)
>> +		pdev = of_find_device_by_node(np);
> 
> Use to_platform_device(dev) instead. Put that at the beginning as I'm
> going to move 'dbi' in here too.

Okay, I'll rewrite it with to_platform_device(dev).
Should I refer somewhere to rebase to your change?

Thank you,

---
Best Regards
Kunihiko Hayashi
Kunihiko Hayashi Sept. 28, 2020, 12:55 a.m. UTC | #3
On 2020/09/25 18:10, Kunihiko Hayashi wrote:
> Hi Rob,
> 
> On 2020/09/24 0:57, Rob Herring wrote:
>> On Fri, Sep 11, 2020 at 05:50:02PM +0900, Kunihiko Hayashi wrote:
>>> This gets iATU register area from reg property that has reg-names "atu".
>>> In Synopsys DWC version 4.80 or later, since iATU register area is
>>> separated from core register area, this area is necessary to get from
>>> DT independently.
>>>
>>> Cc: Murali Karicheri <m-karicheri2@ti.com>
>>> Cc: Jingoo Han <jingoohan1@gmail.com>
>>> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>>> Suggested-by: Rob Herring <robh@kernel.org>
>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
>>> ---
>>>   drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
>>>   1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
>>> index 4d105ef..4a360bc 100644
>>> --- a/drivers/pci/controller/dwc/pcie-designware.c
>>> +++ b/drivers/pci/controller/dwc/pcie-designware.c
>>> @@ -10,6 +10,7 @@
>>>   #include <linux/delay.h>
>>>   #include <linux/of.h>
>>> +#include <linux/of_platform.h>
>>>   #include <linux/types.h>
>>>   #include "../../pci.h"
>>> @@ -526,11 +527,16 @@ void dw_pcie_setup(struct dw_pcie *pci)
>>>       u32 val;
>>>       struct device *dev = pci->dev;
>>>       struct device_node *np = dev->of_node;
>>> +    struct platform_device *pdev;
>>>       if (pci->version >= 0x480A || (!pci->version &&
>>>                          dw_pcie_iatu_unroll_enabled(pci))) {
>>>           pci->iatu_unroll_enabled = true;
>>> -        if (!pci->atu_base)
>>> +        pdev = of_find_device_by_node(np);
>>
>> Use to_platform_device(dev) instead. Put that at the beginning as I'm
>> going to move 'dbi' in here too.
> 
> Okay, I'll rewrite it with to_platform_device(dev).
> Should I refer somewhere to rebase to your change?
It seems there is no dbi patch yet, so I'm going to send v2 in advance
for now. I can rebase it if necessary.

Thank you,

---
Best Regards
Kunihiko Hayashi
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 4d105ef..4a360bc 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -10,6 +10,7 @@ 
 
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/types.h>
 
 #include "../../pci.h"
@@ -526,11 +527,16 @@  void dw_pcie_setup(struct dw_pcie *pci)
 	u32 val;
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
+	struct platform_device *pdev;
 
 	if (pci->version >= 0x480A || (!pci->version &&
 				       dw_pcie_iatu_unroll_enabled(pci))) {
 		pci->iatu_unroll_enabled = true;
-		if (!pci->atu_base)
+		pdev = of_find_device_by_node(np);
+		if (!pci->atu_base && pdev)
+			pci->atu_base =
+			    devm_platform_ioremap_resource_byname(pdev, "atu");
+		if (IS_ERR_OR_NULL(pci->atu_base))
 			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
 	}
 	dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?