From patchwork Wed Mar 14 18:15:55 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: John Garry X-Patchwork-Id: 885987 X-Patchwork-Delegate: bhelgaas@google.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=huawei.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 401g2R1SzXz9sVD for ; Thu, 15 Mar 2018 05:18:23 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752079AbeCNSRK (ORCPT ); Wed, 14 Mar 2018 14:17:10 -0400 Received: from szxga04-in.huawei.com ([45.249.212.190]:6636 "EHLO huawei.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751302AbeCNSRG (ORCPT ); Wed, 14 Mar 2018 14:17:06 -0400 Received: from DGGEMS408-HUB.china.huawei.com (unknown [172.30.72.60]) by Forcepoint Email with ESMTP id 2B4E774AE67F4; Thu, 15 Mar 2018 02:16:51 +0800 (CST) Received: from localhost.localdomain (10.67.212.75) by DGGEMS408-HUB.china.huawei.com (10.3.19.208) with Microsoft SMTP Server id 14.3.361.1; Thu, 15 Mar 2018 02:16:46 +0800 From: John Garry To: , , , , , , , , , , , , , CC: , , , , , , , , , , , , , Subject: [PATCH v17 06/10] HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings Date: Thu, 15 Mar 2018 02:15:55 +0800 Message-ID: <1521051359-34473-7-git-send-email-john.garry@huawei.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1521051359-34473-1-git-send-email-john.garry@huawei.com> References: <1521051359-34473-1-git-send-email-john.garry@huawei.com> MIME-Version: 1.0 X-Originating-IP: [10.67.212.75] X-CFilter-Loop: Reflected Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Zhichang Yuan The low-pin-count(LPC) interface of Hip06/Hip07 accesses the peripherals in I/O port addresses. This patch implements the LPC host controller driver which perform the I/O operations on the underlying hardware. We don't want to touch those existing peripherals' driver, such as ipmi-bt. So this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched in the I/O accessors to retrieve the host-local I/O port. The driver config is set as a bool instead of a trisate. The reason here is that, by the very nature of the driver providing a logical PIO range, it does not make sense to have this driver as a loadable module. Another more specific reason is that the Huawei D03 board which includes hip06 SoC requires the LPC bus for UART console, so should be built in. Signed-off-by: Zou Rongrong Signed-off-by: Zhichang Yuan Signed-off-by: John Garry Acked-by: Rob Herring #dts part Reviewed-by: Andy Shevchenko Tested-by: dann frazier --- .../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ++ drivers/bus/Kconfig | 8 + drivers/bus/Makefile | 2 + drivers/bus/hisi_lpc.c | 421 +++++++++++++++++++++ 4 files changed, 464 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt create mode 100644 drivers/bus/hisi_lpc.c diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt new file mode 100644 index 0000000..213181f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt @@ -0,0 +1,33 @@ +Hisilicon Hip06 low-pin-count device + Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + Hip06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not cpu addresses, and there is no 'ranges' property in + LPC device node. + +Required properties: +- compatible: value should be as follows: + (a) "hisilicon,hip06-lpc" + (b) "hisilicon,hip07-lpc" +- #address-cells: must be 2 which stick to the ISA/EISA binding doc. +- #size-cells: must be 1 which stick to the ISA/EISA binding doc. +- reg: base memory range where the LPC register set is mapped. + +Note: + The node name before '@' must be "isa" to represent the binding stick to the + ISA/EISA binding specification. + +Example: + +isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; +}; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 769599b..0097317 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -65,6 +65,14 @@ config BRCMSTB_GISB_ARB arbiter. This driver provides timeout and target abort error handling and internal bus master decoding. +config HISILICON_LPC + bool "Support for ISA I/O space on Hisilicon hip06/7" + depends on ARM64 && (ARCH_HISI || COMPILE_TEST) + select INDIRECT_PIO + help + Driver needed for some legacy ISA devices attached to Low-Pin-Count + on Hisilicon hip06/7 SoC. + config IMX_WEIM bool "Freescale EIM DRIVER" depends on ARCH_MXC diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index b666c49..b8d9ffb 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -12,6 +12,8 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o # DPAA2 fsl-mc bus obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/ +obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o + obj-$(CONFIG_IMX_WEIM) += imx-weim.o obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c new file mode 100644 index 0000000..c331609 --- /dev/null +++ b/drivers/bus/hisi_lpc.c @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved. + * Author: Zhichang Yuan + * Author: Zou Rongrong + * Author: John Garry + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "hisi-lpc" + +/* + * Setting this bit means each IO operation will target to a + * different port address: + * 0 means repeatedly IO operations will stick on the same port, + * such as BT; + */ +#define FG_INCRADDR_LPC 0x02 + +struct lpc_cycle_para { + unsigned int opflags; + unsigned int csize; /* the data length of each operation */ +}; + +struct hisi_lpc_dev { + spinlock_t cycle_lock; + void __iomem *membase; + struct logic_pio_hwaddr *io_host; +}; + +/* The maxIO cycle counts supported is four per operation at maximum */ +#define LPC_MAX_DWIDTH 4 + +#define LPC_REG_STARTUP_SIGNAL 0x00 +#define LPC_REG_STARTUP_SIGNAL_START BIT(0) +#define LPC_REG_OP_STATUS 0x04 +#define LPC_REG_OP_STATUS_IDLE BIT(0) +#define LPC_REG_OP_STATUS_FINISHED BIT(1) +#define LPC_REG_OP_LEN 0x10 /* LPC cycles count per start */ +#define LPC_REG_CMD 0x14 +#define LPC_REG_CMD_OP BIT(0) /* 0: read, 1: write */ +#define LPC_REG_CMD_SAMEADDR BIT(3) +#define LPC_REG_ADDR 0x20 /* target address */ +#define LPC_REG_WDATA 0x24 /* write FIFO */ +#define LPC_REG_RDATA 0x28 /* read FIFO */ + +/* The minimal nanosecond interval for each query on LPC cycle status. */ +#define LPC_NSEC_PERWAIT 100 + +/* + * The maximum waiting time is about 128us. + * It is specific for stream I/O, such as ins. + * The fastest IO cycle time is about 390ns, but the worst case will wait + * for extra 256 lpc clocks, so (256 + 13) * 30ns = 8 us. The maximum + * burst cycles is 16. So, the maximum waiting time is about 128us under + * worst case. + * choose 1300 as the maximum. + */ +#define LPC_MAX_WAITCNT 1300 +/* About 10us. This is specific for single IO operation, such as inb. */ +#define LPC_PEROP_WAITCNT 100 + +static inline int wait_lpc_idle(unsigned char *mbase, + unsigned int waitcnt) { + do { + u32 status; + + status = readl(mbase + LPC_REG_OP_STATUS); + if (status & LPC_REG_OP_STATUS_IDLE) + return (status & LPC_REG_OP_STATUS_FINISHED) ? 0 : -EIO; + ndelay(LPC_NSEC_PERWAIT); + } while (--waitcnt); + + return -ETIME; +} + +/* + * hisi_lpc_target_in - trigger a series of LPC cycles for read operation + * @lpcdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @addr: the lpc I/O target port address + * @buf: where the read back data is stored + * @opcnt: how many I/O operations required, i.e. data width + * + * Returns 0 on success, non-zero on fail. + */ +static int +hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long addr, unsigned char *buf, + unsigned long opcnt) +{ + unsigned int cmd_word; + unsigned int waitcnt; + unsigned long flags; + int ret; + + if (!buf || !opcnt || !para || !para->csize || !lpcdev) + return -EINVAL; + + cmd_word = 0; /* IO mode, Read */ + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_REG_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + /* whole operation must be atomic */ + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(opcnt, lpcdev->membase + LPC_REG_OP_LEN); + + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + + writel_relaxed(addr, lpcdev->membase + LPC_REG_ADDR); + + writel(LPC_REG_STARTUP_SIGNAL_START, + lpcdev->membase + LPC_REG_STARTUP_SIGNAL); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + if (ret) { + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + return ret; + } + + readsb(lpcdev->membase + LPC_REG_RDATA, buf, opcnt); + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + + return 0; +} + +/* + * hisi_lpc_target_out - trigger a series of LPC cycles for write operation + * @lpcdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @addr: the lpc I/O target port address + * @buf: where the data to be written is stored + * @opcnt: how many I/O operations required, i.e. data width + * + * Returns 0 on success, non-zero on fail. + */ +static int +hisi_lpc_target_out(struct hisi_lpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long addr, const unsigned char *buf, + unsigned long opcnt) +{ + unsigned int waitcnt; + unsigned long flags; + u32 cmd_word; + int ret; + + if (!buf || !opcnt || !para || !lpcdev) + return -EINVAL; + + /* default is increasing address */ + cmd_word = LPC_REG_CMD_OP; /* IO mode, write */ + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_REG_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(opcnt, lpcdev->membase + LPC_REG_OP_LEN); + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + writel_relaxed(addr, lpcdev->membase + LPC_REG_ADDR); + + writesb(lpcdev->membase + LPC_REG_WDATA, buf, opcnt); + + writel(LPC_REG_STARTUP_SIGNAL_START, + lpcdev->membase + LPC_REG_STARTUP_SIGNAL); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + + return ret; +} + +static inline unsigned long +hisi_lpc_pio_to_addr(struct hisi_lpc_dev *lpcdev, unsigned long pio) +{ + return pio - lpcdev->io_host->io_start + lpcdev->io_host->hw_start; +} + +/* + * hisi_lpc_comm_in - input the data in a single operation + * @hostdata: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @dwidth: the data length required to read from the target I/O port. + * + * When success, data is returned. Otherwise, ~0 is returned. + */ +static u32 hisi_lpc_comm_in(void *hostdata, unsigned long pio, size_t dwidth) +{ + struct hisi_lpc_dev *lpcdev = hostdata; + struct lpc_cycle_para iopara; + unsigned long addr; + u32 rd_data = 0; + int ret; + + if (!lpcdev || !dwidth || dwidth > LPC_MAX_DWIDTH) + return ~0; + + addr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dwidth; + + ret = hisi_lpc_target_in(lpcdev, &iopara, addr, + (unsigned char *)&rd_data, dwidth); + if (ret) + return ~0; + + return le32_to_cpu(rd_data); +} + +/* + * hisi_lpc_comm_out - output the data in a single operation + * @hostdata: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @val: a value to be outputted from caller, maximum is four bytes. + * @dwidth: the data width required writing to the target I/O port. + * + * This function is corresponding to out(b,w,l) only + * + */ +static void hisi_lpc_comm_out(void *hostdata, unsigned long pio, + u32 val, size_t dwidth) +{ + struct hisi_lpc_dev *lpcdev = hostdata; + struct lpc_cycle_para iopara; + const unsigned char *buf; + unsigned long addr; + + if (!lpcdev || !dwidth || dwidth > LPC_MAX_DWIDTH) + return; + + val = cpu_to_le32(val); + + buf = (const unsigned char *)&val; + addr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dwidth; + + hisi_lpc_target_out(lpcdev, &iopara, addr, buf, dwidth); +} + +/* + * hisi_lpc_comm_ins - input the data in the buffer in multiple operations + * @hostdata: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @buffer: a buffer where read/input data bytes are stored. + * @dwidth: the data width required writing to the target I/O port. + * @count: how many data units whose length is dwidth will be read. + * + * When success, the data read back is stored in buffer pointed by buffer. + * Returns 0 on success, -errno otherwise + * + */ +static u32 +hisi_lpc_comm_ins(void *hostdata, unsigned long pio, void *buffer, + size_t dwidth, unsigned int count) +{ + struct hisi_lpc_dev *lpcdev = hostdata; + unsigned char *buf = buffer; + struct lpc_cycle_para iopara; + unsigned long addr; + + if (!lpcdev || !buf || !count || !dwidth || dwidth > LPC_MAX_DWIDTH) + return -EINVAL; + + iopara.opflags = 0; + if (dwidth > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dwidth; + + addr = hisi_lpc_pio_to_addr(lpcdev, pio); + + do { + int ret; + + ret = hisi_lpc_target_in(lpcdev, &iopara, addr, buf, dwidth); + if (ret) + return ret; + buf += dwidth; + } while (--count); + + return 0; +} + +/* + * hisi_lpc_comm_outs - output the data in the buffer in multiple operations + * @hostdata: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @buffer: a buffer where write/output data bytes are stored. + * @dwidth: the data width required writing to the target I/O port . + * @count: how many data units whose length is dwidth will be written. + * + */ +static void +hisi_lpc_comm_outs(void *hostdata, unsigned long pio, const void *buffer, + size_t dwidth, unsigned int count) +{ + struct hisi_lpc_dev *lpcdev = hostdata; + struct lpc_cycle_para iopara; + const unsigned char *buf = buffer; + unsigned long addr; + + if (!lpcdev || !buf || !count || !dwidth || dwidth > LPC_MAX_DWIDTH) + return; + + iopara.opflags = 0; + if (dwidth > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dwidth; + + addr = hisi_lpc_pio_to_addr(lpcdev, pio); + do { + if (hisi_lpc_target_out(lpcdev, &iopara, addr, buf, dwidth)) + break; + buf += dwidth; + } while (--count); +} + +static const struct logic_pio_host_ops hisi_lpc_ops = { + .in = hisi_lpc_comm_in, + .out = hisi_lpc_comm_out, + .ins = hisi_lpc_comm_ins, + .outs = hisi_lpc_comm_outs, +}; + +/* + * hisi_lpc_probe - the probe callback function for hisi lpc host, + * will finish all the initialization. + * @pdev: the platform device corresponding to hisi lpc host + * + * Returns 0 on success, non-zero on fail. + */ +static int hisi_lpc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct acpi_device *acpi_device = ACPI_COMPANION(dev); + struct logic_pio_hwaddr *range; + struct hisi_lpc_dev *lpcdev; + resource_size_t io_end; + struct resource *res; + int ret; + + lpcdev = devm_kzalloc(dev, sizeof(*lpcdev), GFP_KERNEL); + if (!lpcdev) + return -ENOMEM; + + spin_lock_init(&lpcdev->cycle_lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lpcdev->membase = devm_ioremap_resource(dev, res); + if (IS_ERR(lpcdev->membase)) + return PTR_ERR(lpcdev->membase); + + range = devm_kzalloc(dev, sizeof(*range), GFP_KERNEL); + if (!range) + return -ENOMEM; + range->fwnode = dev->fwnode; + range->flags = LOGIC_PIO_INDIRECT; + range->size = PIO_INDIRECT_SIZE; + + ret = logic_pio_register_range(range); + if (ret) { + dev_err(dev, "register IO range failed (%d)!\n", ret); + return ret; + } + lpcdev->io_host = range; + + /* register the LPC host PIO resources */ + if (!acpi_device) + ret = of_platform_populate(dev->of_node, NULL, NULL, dev); + if (ret) + return ret; + + lpcdev->io_host->hostdata = lpcdev; + lpcdev->io_host->ops = &hisi_lpc_ops; + + io_end = lpcdev->io_host->io_start + lpcdev->io_host->size; + dev_info(dev, "registered range [%pa - %pa]\n", + &lpcdev->io_host->io_start, &io_end); + + return ret; +} + +static const struct of_device_id hisi_lpc_of_match[] = { + { .compatible = "hisilicon,hip06-lpc", }, + { .compatible = "hisilicon,hip07-lpc", }, + {} +}; + +static struct platform_driver hisi_lpc_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = hisi_lpc_of_match, + }, + .probe = hisi_lpc_probe, +}; + +builtin_platform_driver(hisi_lpc_driver);