@@ -1,61 +1,40 @@
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the PCI bus specific drivers.
-#
-obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \
- pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
- irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o
+obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \
+ remove.o pci.o pci-driver.o search.o \
+ pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
+ setup-bus.o vc.o mmap.o setup-irq.o
ifdef CONFIG_PCI
-obj-$(CONFIG_PROC_FS) += proc.o
-obj-$(CONFIG_SYSFS) += slot.o
-obj-$(CONFIG_OF) += of.o
+obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_SYSFS) += slot.o
+obj-$(CONFIG_OF) += of.o
endif
-obj-$(CONFIG_PCI_QUIRKS) += quirks.o
-
-# Build PCI Express stuff if needed
-obj-$(CONFIG_PCIEPORTBUS) += pcie/
-
-# Build the PCI Hotplug drivers if we were asked to
-obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
-
-# Build the PCI MSI interrupt support
-obj-$(CONFIG_PCI_MSI) += msi.o
-
-obj-$(CONFIG_PCI_ATS) += ats.o
-obj-$(CONFIG_PCI_IOV) += iov.o
-
-#
-# ACPI Related PCI FW Functions
-# ACPI _DSM provided firmware instance and string name
-#
-obj-$(CONFIG_ACPI) += pci-acpi.o
-
-# SMBIOS provided firmware instance and labels
-obj-$(CONFIG_PCI_LABEL) += pci-label.o
-
-# Intel MID platform PM support
-obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
-
-obj-$(CONFIG_PCI_SYSCALL) += syscall.o
-
-obj-$(CONFIG_PCI_STUB) += pci-stub.o
-
-obj-$(CONFIG_PCI_ECAM) += ecam.o
-
+obj-$(CONFIG_PCI_QUIRKS) += quirks.o
+obj-$(CONFIG_PCIEPORTBUS) += pcie/
+obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
+obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_PCI_ATS) += ats.o
+obj-$(CONFIG_PCI_IOV) += iov.o
+obj-$(CONFIG_ACPI) += pci-acpi.o
+obj-$(CONFIG_PCI_LABEL) += pci-label.o
+obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
+obj-$(CONFIG_PCI_SYSCALL) += syscall.o
+obj-$(CONFIG_PCI_STUB) += pci-stub.o
+obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
-
-# PCI host controller drivers
-obj-y += host/
-obj-y += switch/
+obj-y += host/
+obj-y += switch/
+# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
-# Endpoint library must be initialized before its users
obj-$(CONFIG_PCIE_CADENCE) += cadence/
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
+
+ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
@@ -1,20 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
#
-# Makefile for PCI-Express PORT Driver
-#
-
-# Build PCI Express ASPM if needed
-obj-$(CONFIG_PCIEASPM) += aspm.o
+# Makefile for PCI Express features and port driver
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
-# Build PCI Express AER if needed
+obj-$(CONFIG_PCIEASPM) += aspm.o
obj-$(CONFIG_PCIEAER) += aer/
-
-obj-$(CONFIG_PCIE_PME) += pme.o
-
-obj-$(CONFIG_PCIE_DPC) += pcie-dpc.o
-obj-$(CONFIG_PCIE_PTM) += ptm.o
+obj-$(CONFIG_PCIE_PME) += pme.o
+obj-$(CONFIG_PCIE_DPC) += pcie-dpc.o
+obj-$(CONFIG_PCIE_PTM) += ptm.o