@@ -339,6 +339,9 @@ static void pci_read_bridge_io(struct pci_bus *child)
struct pci_bus_region region;
struct resource *res;
+ if (!pci_find_host_bridge(child)->has_ioport)
+ return;
+
io_mask = PCI_IO_RANGE_MASK;
io_granularity = 0x1000;
if (dev->io_window_1k) {
@@ -2126,6 +2129,9 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
bus_addr[0] = '\0';
dev_info(&b->dev, "root bus resource %pR%s\n", res, bus_addr);
+ if (resource_type(res) == IORESOURCE_IO)
+ bridge->has_ioport = 1;
+
if (resource_type(res) == IORESOURCE_MEM) {
if ((res->end - offset) > 0xffffffff)
bridge->has_mem64 = 1;
@@ -226,6 +226,10 @@ static void pdev_assign_resources_prepare(struct pci_dev *dev,
if (resource_disabled(r) || r->parent)
continue;
+ if ((r->flags & IORESOURCE_IO) &&
+ !pci_find_host_bridge(dev->bus)->has_ioport)
+ continue;
+
r_align = __pci_resource_alignment(dev, r, realloc_head);
if (!r_align) {
dev_warn(&dev->dev, "BAR %d: %pR has bogus alignment\n",
@@ -1189,6 +1193,11 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
min_size = 0;
}
+ if (!pci_find_host_bridge(bus)->has_ioport) {
+ b_res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
+ return;
+ }
+
min_align = window_alignment(bus, IORESOURCE_IO);
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
@@ -414,6 +414,7 @@ struct pci_host_bridge {
void *release_data;
unsigned int ignore_reset_delay:1; /* for entire hierarchy */
unsigned int has_mem64:1;
+ unsigned int has_ioport:1;
};
#define to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
The PCI subsystem always assumes that I/O is supported on root bus and tries to assign an I/O window to each child bus even if that is not the case. The use cases is on Intel 8 socket system that have 8 root buses, last two root buses would not have io port resources from _CRS. Check if root bus supports I/O, and later during sizing and assigning, check that flags and skip those resources. Signed-off-by: Yinghai Lu <yinghai@kernel.org> --- drivers/pci/probe.c | 6 ++++++ drivers/pci/setup-bus.c | 9 +++++++++ include/linux/pci.h | 1 + 3 files changed, 16 insertions(+)