| Message ID | 1393944864-28113-1-git-send-email-tharvey@gateworks.com |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Mar 4, 2014 at 6:54 AM, Tim Harvey <tharvey@gateworks.com> wrote: > When an interrupt-map contains multiple entries an imap pointer arithmetic > bug can cause only the first entry to be properly evaluated and causes > the out_irq parameters to be incorrect depending on the #interrupt-cells > and #address-cells of the parent interrupt controller. > > Specifically, the imap pointer into the interrupt-map table should be > adjusted by the parent interrupt controller #interrupt-cells size only > as at this point the only the parent unit interrupt specifier needs to be > stepped over. > > This resolves an issue encountered when using the of_irq_parse_and_map_pci() > for the imx6 pcie host controller driver map_irq function where a P2P bridge > is on the bus and legacy PCI interrupts are to be used. > Note the subject of my patch was incorrect - its a single patch, not a series. The subject should read: [PATCH] of/irq: Fix irq-mapping in of_irq_parse_raw() Sorry for the confusion, Tim -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 9bcf2cf..8829197 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -237,11 +237,11 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) /* Check for malformed properties */ if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS)) goto fail; - if (imaplen < (newaddrsize + newintsize)) + if (imaplen < newintsize) goto fail; - imap += newaddrsize + newintsize; - imaplen -= newaddrsize + newintsize; + imap += newintsize; + imaplen -= newintsize; pr_debug(" -> imaplen=%d\n", imaplen); }
When an interrupt-map contains multiple entries an imap pointer arithmetic bug can cause only the first entry to be properly evaluated and causes the out_irq parameters to be incorrect depending on the #interrupt-cells and #address-cells of the parent interrupt controller. Specifically, the imap pointer into the interrupt-map table should be adjusted by the parent interrupt controller #interrupt-cells size only as at this point the only the parent unit interrupt specifier needs to be stepped over. This resolves an issue encountered when using the of_irq_parse_and_map_pci() for the imx6 pcie host controller driver map_irq function where a P2P bridge is on the bus and legacy PCI interrupts are to be used. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-samsung-soc <linux-samsung-soc@vger.kernel.org> Cc: Richard Zhu <r65037@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Simon Horman <horms@verge.net.au> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-tegra <linux-tegra@vger.kernel.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Grant Likely <grant.likely@linaro.org> --- drivers/of/irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)