Show patches with: Submitter = Jim Quinlan       |    Archived = No       |   177 patches
« 1 2 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[1/8] SOC: brcmstb: add memory API [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[1/9] SOC: brcmstb: add memory API [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[2/8] PCI: host: brcmstb: add DT docs for Brcmstb PCIe device [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[2/9] PCI: host: brcmstb: add DT docs for Brcmstb PCIe device [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[3/8] PCI: host: brcmstb: Broadcom PCIe Host Controller [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[3/9] PCI: host: brcmstb: Broadcom PCIe Host Controller [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[4/8] PCI: host: brcmstb: add dma-ranges for inbound traffic [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[4/9] arm64: dma-mapping: export symbol arch_setup_dma_ops [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[5/8] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[5/9] PCI: host: brcmstb: add dma-ranges for inbound traffic [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[6/8] PCI: host: brcmstb: add MSI capability [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[6/9] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[7/8] MIPS: BMIPS: add PCI bindings for 7425, 7435 [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[7/9] PCI: host: brcmstb: add MSI capability [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[8/8] MIPS: BMIPS: enable PCI [1/8] SOC: brcmstb: add memory API - - - - --- 2017-10-24 Jim Quinlan Changes Requested
[8/9] MIPS: BMIPS: add PCI bindings for 7425, 7435 [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[9/9] MIPS: BMIPS: enable PCI [1/9] SOC: brcmstb: add memory API - - - - --- 2017-10-11 Jim Quinlan Changes Requested
[RESEND,v3,2/2] PCI: brcmstb: use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller 1 1 - - --- 2020-12-16 Jim Quinlan New
[v1,1/3] dt-bindings: PCI: brcmstb: Add two optional props PCI: brcmstb: Clkreq# accomodations of downstream device - - - - --- 2023-04-06 Jim Quinlan New
[v1,1/4] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: Add panic handler and shutdown func 1 1 - - --- 2021-04-27 Jim Quinlan New
[v1,1/4] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-01 Jim Quinlan New
[v1,1/4] dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs PCI: brcmstb: Augment driver for MIPs SOCs 2 - - - --- 2021-12-09 Jim Quinlan New
[v1,1/5] PCI: brcmstb: Enable Multi-MSI PCI: brcmstb: Add Multi-MSI and some improvements 2 - - - --- 2022-10-06 Jim Quinlan New
[v1,2/3] PCI: brcmstb: Clkreq# accomodations of downstream device PCI: brcmstb: Clkreq# accomodations of downstream device - - - - --- 2023-04-06 Jim Quinlan New
[v1,2/4] MIPS: bmips: Add support PCIe controller device nodes PCI: brcmstb: Augment driver for MIPs SOCs 1 - - - --- 2021-12-09 Jim Quinlan New
[v1,2/4] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-01 Jim Quinlan New
[v1,2/4] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic handler and shutdown func 1 - - - --- 2021-04-27 Jim Quinlan New
[v1,2/5] PCI: brcmstb: Wait for 100ms following PERST# deassert PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-06 Jim Quinlan New
[v1,3/3] PCI: brcmstb: Allow setting the completion timeout PCI: brcmstb: Clkreq# accomodations of downstream device - - - - --- 2023-04-06 Jim Quinlan New
[v1,3/4] MIPS: bmips: Remove obsolete DMA mapping support PCI: brcmstb: Augment driver for MIPs SOCs 1 - 1 - --- 2021-12-09 Jim Quinlan New
[v1,3/4] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-01 Jim Quinlan New
[v1,3/4] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Add panic handler and shutdown func 1 - - - --- 2021-04-27 Jim Quinlan New
[v1,3/5] PCI: brcmstb: Replace status loops with read_poll_timeout_atomic() PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-06 Jim Quinlan New
[v1,4/4] PCI: brcmstb: Augment driver for MIPs SOCs PCI: brcmstb: Augment driver for MIPs SOCs 1 - - - --- 2021-12-09 Jim Quinlan New
[v1,4/4] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-01 Jim Quinlan New
[v1,4/4] PCI: brcmstb: add shutdown call to driver PCI: brcmstb: Add panic handler and shutdown func 1 - - - --- 2021-04-27 Jim Quinlan New
[v1,4/5] PCI: brcmstb: Functions needlessly specified as "inline" PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-06 Jim Quinlan New
[v1,5/5] PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-06 Jim Quinlan New
[v10,1/7] PCI: brcmstb: Fix function return value handling PCI: brcmstb: root port turns on sub-device power 1 - - - --- 2021-12-09 Jim Quinlan New
[v10,2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: root port turns on sub-device power 2 - - - --- 2021-12-09 Jim Quinlan New
[v10,3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: root port turns on sub-device power - - 1 - --- 2021-12-09 Jim Quinlan New
[v10,4/7] PCI: Add mechanism to turn on subdev regulators PCI: brcmstb: root port turns on sub-device power - - - - --- 2021-12-09 Jim Quinlan New
[v10,5/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: root port turns on sub-device power - - - - --- 2021-12-09 Jim Quinlan New
[v10,6/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: root port turns on sub-device power - - - - --- 2021-12-09 Jim Quinlan New
[v10,7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: root port turns on sub-device power - - - - --- 2021-12-09 Jim Quinlan New
[v11,1/7] PCI: brcmstb: Fix function return value handling PCI: brcmstb: root port turns on sub-device power 1 - - - --- 2022-01-06 Jim Quinlan New
[v11,2/7] dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: root port turns on sub-device power 2 - - - --- 2022-01-06 Jim Quinlan New
[v11,3/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: root port turns on sub-device power 1 - 1 - --- 2022-01-06 Jim Quinlan New
[v11,4/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: root port turns on sub-device power - - - - --- 2022-01-06 Jim Quinlan New
[v11,5/7] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: root port turns on sub-device power - - - - --- 2022-01-06 Jim Quinlan New
[v11,6/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: root port turns on sub-device power - - - - --- 2022-01-06 Jim Quinlan New
[v11,7/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: root port turns on sub-device power - - - - --- 2022-01-06 Jim Quinlan New
[v1] MAINTAINERS: new entry for Broadcom STB PCIe driver [v1] MAINTAINERS: new entry for Broadcom STB PCIe driver 1 - - - --- 2021-08-18 Jim Quinlan New
[v1] PCI: brcmstb: Fix regression regarding missing PCIe linkup [v1] PCI: brcmstb: Fix regression regarding missing PCIe linkup - 2 - - --- 2022-05-18 Jim Quinlan New
[v2,1/1] PCI: brcmstb: Fix regression regarding missing PCIe linkup PCI: brcmstb: Fix regression regarding missing PCIe linkup - 2 - - --- 2022-05-28 Jim Quinlan New
[v2,1/3] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: Add panic handler 1 1 - - --- 2021-06-15 Jim Quinlan New
[v2,1/3] dt-bindings: PCI: brcmstb: Add two optional props PCI: brcmstb: CLKREQ# accomodations of downstream device - - - - --- 2023-04-11 Jim Quinlan New
[v2,1/5] PCI: brcmstb: Enable Multi-MSI PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-11 Jim Quinlan New
[v2,1/6] PCI: brcmstb: Remove unnecessary forward declarations PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v2,2/3] PCI: brcmstb: CLKREQ# accomodations of downstream device PCI: brcmstb: CLKREQ# accomodations of downstream device - - - - --- 2023-04-11 Jim Quinlan New
[v2,2/3] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: Add panic handler 1 - - - --- 2021-06-15 Jim Quinlan New
[v2,2/5] PCI: brcmstb: Wait for 100ms following PERST# deassert PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-11 Jim Quinlan New
[v2,2/6] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v2,3/3] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: Add panic handler 1 - - - --- 2021-06-15 Jim Quinlan New
[v2,3/3] PCI: brcmstb: Set PCIe transaction completion timeout PCI: brcmstb: CLKREQ# accomodations of downstream device - - - - --- 2023-04-11 Jim Quinlan New
[v2,3/5] PCI: brcmstb: Replace status loops with read_poll_timeout_atomic() PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-11 Jim Quinlan New
[v2,3/6] PCI: brcmstb: Add "refusal mode" to preclude PCIe-induced CPU aborts PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v2,4/5] PCI: brcmstb: Functions needlessly specified as "inline" PCI: brcmstb: Add Multi-MSI and some improvements 1 - 1 - --- 2022-10-11 Jim Quinlan New
[v2,4/6] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v2,5/5] PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits PCI: brcmstb: Add Multi-MSI and some improvements 1 - - - --- 2022-10-11 Jim Quinlan New
[v2,5/6] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v2,6/6] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-16 Jim Quinlan New
[v3,1/3] dt-bindings: PCI: brcmstb: brcm,{enable-l1ss,completion-timeout-us} props PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 - --- 2023-04-19 Jim Quinlan New
[v3,1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators PCI: brcmstb: add EP regulators and panic handler - - - - --- 2021-03-26 Jim Quinlan New
[v3,1/7] PCI: brcmstb: Remove unnecessary forward declarations PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,1/8] SOC: brcmstb: add memory API PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,2/3] PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - 1 --- 2023-04-19 Jim Quinlan New
[v3,2/6] PCI: brcmstb: Add control of EP voltage regulators PCI: brcmstb: add EP regulators and panic handler - - - - --- 2021-03-26 Jim Quinlan New
[v3,2/7] PCI: brcmstb: Split brcm_pcie_setup() into two funcs PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,2/8] dt-bindings: pci: Add DT docs for Brcmstb PCIe device PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) 1 - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,3/3] PCI: brcmstb: Set PCIe transaction completion timeout PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - 1 --- 2023-04-19 Jim Quinlan New
[v3,3/6] PCI: brcmstb: Do not turn off regulators if EP can wake up PCI: brcmstb: add EP regulators and panic handler - - - - --- 2021-03-26 Jim Quinlan New
[v3,3/7] PCI: brcmstb: Gate config space access on link status PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,3/8] PCI: brcmstb: Add Broadcom STB PCIe host controller driver PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,4/6] PCI: brcmstb: Give 7216 SOCs their own config type PCI: brcmstb: add EP regulators and panic handler 1 - - - --- 2021-03-26 Jim Quinlan New
[v3,4/7] PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,4/8] PCI: brcmstb: Add dma-range mapping for inbound traffic PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,5/6] PCI: brcmstb: Add panic/die handler to RC driver PCI: brcmstb: add EP regulators and panic handler 1 - - - --- 2021-03-26 Jim Quinlan New
[v3,5/7] PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,5/8] PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for MIPS PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,6/6] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: add EP regulators and panic handler 1 1 - - --- 2021-03-26 Jim Quinlan New
[v3,6/7] PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,6/8] PCI: brcmstb: Add MSI capability PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,7/7] PCI: brcmstb: Have .map_bus function names end with 'map_bus' PCI: brcmstb: Re-submit reverted patchset - - - - --- 2022-07-25 Jim Quinlan New
[v3,7/8] MIPS: BMIPS: Add PCI bindings for 7425, 7435 PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v3,8/8] MIPS: BMIPS: Enable PCI PCI: brcmstb: Add Broadcom Settopbox PCIe support (V3) - - - - --- 2017-11-14 Jim Quinlan Superseded
[v4,1/2] ata: ahci_brcm: Fix use of BCM7216 reset controller ata: ahci_brcm: Fix use of BCM7216 reset controller 1 2 - - --- 2021-03-08 Jim Quinlan New
[v4,1/5] dt-bindings: PCI: brcmstb: brcm,{enable-l1ss,completion-timeout-us} props PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - 1 - --- 2023-04-28 Jim Quinlan New
[v4,1/6] PCI: brcmstb: Check return value of clk_prepare_enable() PCI: brcmstb: add slot0 device regulators and panic handler 1 1 - - --- 2021-04-01 Jim Quinlan New
[v4,1/8] SOC: brcmstb: add memory API PCI: brcmstb: Add Broadcom Settopbox PCIe support - - - - --- 2018-01-15 Jim Quinlan lorpie01 Superseded
« 1 2 »