Patchwork Linux PCI development

login
register
mail settings

Incoming patches

« Previous 1 2 Next »
Filters: State = Action Required remove filter
Patch A/R/T Date Submitter Delegate State
PCI: Do not touch siblings in pci_assign_unassigned_bridge_resources 0 0 0 2014-06-19 Yinghai Lu New
pci: Allow very large resource windows 0 0 0 2014-07-12 Yinghai Lu New
PCI: Add device specific (non)reset for AMD GPUs 0 0 0 2014-07-16 Alex Williamson New
PCI / PM: Drop unused runtime PM support code for PCIe ports 0 0 0 2014-07-21 Rafael J. Wysocki New
PCI / PM: Allow PCI devices to be put into D3cold during system suspend 0 0 0 2014-07-21 Rafael J. Wysocki New
[1/4] PCI: designware: start parsing bus-range 0 1 0 2014-07-23 Lucas Stach New
[2/4] PCI: designware: get rid of pci_scan_root_bus 0 1 0 2014-07-23 Lucas Stach New
[3/4] PCI: designware: remove pci_assign_unassigned_resources call 0 0 0 2014-07-23 Lucas Stach New
[4/4] PCI: imx6: move to module_init 1 0 0 2014-07-23 Lucas Stach New
[v8,1/2] PCI: designware: enhance dw_pcie_host_init() to support v3.65 DW hardware 2 1 0 2014-07-23 Karicheri, Muralidharan New
[v8,2/2] PCI: add PCI controller for keystone PCIe h/w 1 0 0 2014-07-23 Karicheri, Muralidharan New
[V7,01/17] PCI/IOV: Export interface for retrieve VF's BDF 0 0 0 2014-07-24 Wei Yang New
[V7,02/17] PCI/IOV: Get VF BAR size from hardware directly when platform needs 0 0 0 2014-07-24 Wei Yang New
[V7,03/17] PCI: Add weak pcibios_sriov_resource_alignment() interface 0 0 0 2014-07-24 Wei Yang New
[V7,04/17] PCI: Take additional IOV BAR alignment in sizing and assigning 0 0 0 2014-07-24 Wei Yang New
[V7,05/17] powerpc/pci: Don't unset pci resources for VFs 0 0 0 2014-07-24 Wei Yang New
[V7,06/17] powerpc/pci: Define pcibios_disable_device() on powerpc 0 0 0 2014-07-24 Wei Yang New
[V7,07/17] powrepc/pci: Refactor pci_dn 0 0 0 2014-07-24 Wei Yang New
[V7,08/17] powerpc/powernv: Use pci_dn in PCI config accessor 0 0 0 2014-07-24 Wei Yang New
[V7,09/17] powerpc/powernv: mark IOV BAR with IORESOURCE_ARCH 0 0 0 2014-07-24 Wei Yang New
[V7,10/17] powerpc/powernv: Allocate pe->iommu_table dynamically 0 0 0 2014-07-24 Wei Yang New
[V7,11/17] powerpc/powernv: Add function to deconfig a PE 0 0 0 2014-07-24 Wei Yang New
[V7,12/17] powerpc/powernv: Expand VF resources according to the number of total_pe 0 0 0 2014-07-24 Wei Yang New
[V7,13/17] powerpc/powernv: Implement pcibios_sriov_resource_alignment on powernv 0 0 0 2014-07-24 Wei Yang New
[V7,14/17] powerpc/powernv: Shift VF resource with an offset 0 0 0 2014-07-24 Wei Yang New
[V7,15/17] powerpc/powernv: Allocate VF PE 0 0 0 2014-07-24 Wei Yang New
[V7,16/17] powerpc/powernv: Expanding IOV BAR, with m64_per_iov supported 0 0 0 2014-07-24 Wei Yang New
[V7,17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 0 0 0 2014-07-24 Wei Yang New
PCI: Remove unnecessary variable in pci_add_dynid() 0 0 0 2014-07-25 Tobias Klauser New
[v1,1/3] PCI: export pci_get_dma_device() helper to other users 0 0 0 2014-07-25 Andy Shevchenko New
[v1,2/3] pch_uart: use pci_get_dma_device() helper 0 0 0 2014-07-25 Andy Shevchenko New
[v1,3/3] spi: topcliff-pch: use pci_get_dma_device() helper 0 0 0 2014-07-25 Andy Shevchenko New
[1/3] PCI/MSI: Clean up the kobject in struct msi_desc 1 0 0 2014-07-26 Yijing Wang New
[2/3] PCI/MSI: Remove msi_desc->msi_attrib.pos 0 0 0 2014-07-26 Yijing Wang New
[3/3] PCI/MSI: Refactor msi_bus to support EP enable/disable MSI 0 0 0 2014-07-26 Yijing Wang New
[RFC,01/11] PCI/MSI: Use pci_dev->msi_cap instead of msi_desc->msi_attrib.pos 0 0 0 2014-07-26 Yijing Wang New
[RFC,02/11] PCI/MSI: Use new MSI type macro instead of PCI MSI flags 0 0 0 2014-07-26 Yijing Wang New
[RFC,03/11] PCI/MSI: Refactor pci_dev_msi_enabled() 0 0 0 2014-07-26 Yijing Wang New
[RFC,04/11] PCI/MSI: Move MSIX table address mapping out of msix_capability_init 0 0 0 2014-07-26 Yijing Wang New
[RFC,05/11] PCI/MSI: Move populate_msi_sysfs() out of msi_capability_init() 0 0 0 2014-07-26 Yijing Wang New
[RFC,06/11] PCI/MSI: Save MSI irq in PCI MSI layer 0 0 0 2014-07-26 Yijing Wang New
[RFC,07/11] PCI/MSI: Mask MSI-X entry in msix_setup_entries() 0 0 0 2014-07-26 Yijing Wang New
[RFC,08/11] PCI/MSI: Introduce new struct msi_irqs and struct msi_ops 0 0 0 2014-07-26 Yijing Wang New
[RFC,09/11] PCI/MSI: refactor PCI MSI driver 0 0 0 2014-07-26 Yijing Wang New
[RFC,10/11] PCI/MSI: Split the generic MSI code into new file 0 0 0 2014-07-26 Yijing Wang New
[RFC,11/11] x86/MSI: Refactor x86 MSI code 0 0 0 2014-07-26 Yijing Wang New
[v3] PCI: tegra: add missing cleanup in error path and teardown_irq 1 1 0 2014-07-29 Jisheng Zhang New
PCI: update device mps when doing pci hotplug 0 0 0 2014-07-29 Yijing Wang New
PCI: update device mps when doing pci hotplug 0 0 0 2014-07-29 Yijing Wang New
PCI: Reset failed bridge resources in PCI realloc 0 0 0 2014-07-30 Guo Chao New
PCI: Reset failed bridge resources in PCI realloc 0 0 0 2014-07-30 Yinghai Lu New
x86, irq: Keep IRQ assignment for PCI devices during suspend/hibernation 0 0 0 2014-07-31 Jiang Liu New
PCI: handle pci_sriov_set_totalvfs(dev, 0) 0 0 0 2014-07-31 Edward Cree New
[trivial] PCI: convert struct pci_sriov comments to kernel-doc 0 0 0 2014-07-31 Edward Cree New
[1/2] MAINTAINERS: add myself as co-maintainer for i.MX6 PCI driver 3 0 0 2014-07-31 Lucas Stach New
[2/2] PCI: imx6: fix boot hang when link already enabled 1 0 0 2014-07-31 Lucas Stach New
PCI: designware: check private_data validity in single place 2 0 0 2014-08-01 Lucas Stach New
PCI/x86 CPU Hangs: Need to enable CRS Software Visibility (Configuration Request Retry Status) 0 0 0 2014-08-01 Rajat Jain New
[v2,1/2] resource: Add device-managed request/release_resource() 1 0 0 2014-08-01 Thierry Reding New
[v2,2/2] PCI: tegra: Implement a proper resource hierarchy 0 0 0 2014-08-01 Thierry Reding New
[v2,1/2] resource: Add device-managed request/release_resource() 0 0 0 2014-08-01 Thierry Reding New
x86, irq: Keep IRQ assignment for PCI devices during suspend/hibernation, bisected 0 0 0 2014-08-01 Borislav Petkov New
PCI: pciehp: Use ordered workqueue for HPC events 1 0 0 2014-08-01 Sandeep Mann New
[1/3] PCI hotplug: fix a missing space coding style issue 0 0 0 2014-08-04 Quentin Lambert New
[2/3] PCI hotplug: fix a simple if coding style issue 0 0 0 2014-08-04 Quentin Lambert New
[3/3] PCI hotplug: remove assignement from if conditions 0 0 0 2014-08-04 Quentin Lambert New
[Bugfix,1/2] x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation 0 0 1 2014-08-05 Jiang Liu New
[Bugfix,2/2] x86, irq: Keep balance of IOAPIC pin reference count 0 0 0 2014-08-05 Jiang Liu New
[v6] pcie: Add Xilinx PCIe Host Bridge IP driver 1 0 0 2014-08-05 Srikanth Thokala New
PCI/AER: Make linux/aer.h standalone includable 0 0 0 2014-08-05 Thierry Reding New
[01/22] Added some infrastructure to allow assigning PCI device IRQs at device enable time and removed pci_fixup_irqs as the other change obsolites it. 0 0 0 2014-08-05 Matthew Minter New
[02/22] Modified x86 initialisation to accomodate PCI irq changes 0 0 0 2014-08-05 Matthew Minter New
[03/22] Added (untested) support to powerpc initialisation to fix pci irq changes 0 0 0 2014-08-05 Matthew Minter New
[04/22] Added support to ARM architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[05/22] Added (untested) support to frv architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[06/22] Added (untested) support to mips architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[07/22] Fixed PCI initilisation code for arches which dont need to map irqs 0 0 0 2014-08-05 Matthew Minter New
[08/22] Added (untested) workaround to ia64 architecture to accomodate new irq init code. Unfortunately adding runtime irq assignment will not work but avoided breaking the existing code. 0 0 0 2014-08-05 Matthew Minter New
[09/22] Added (untested) support to microblaze architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[10/22] Added (untested) support to cris architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[11/22] Added (untested) support to mn10300 architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[12/22] Added (untested) workaround to parisc architecture to accomodate new irq init code. Unfortunately adding runtime irq assignment will not work but avoided breaking the existing code. 0 0 0 2014-08-05 Matthew Minter New
[13/22] Added (untested) support to sparc architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[14/22] Added (untested) support to alpha architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[15/22] Added (untested) support to m68k architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[16/22] Added (untested) support to tile architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[17/22] Added (untested) support to sh architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[18/22] Added (untested) support to unicore32 architecture to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[19/22] Added (untested) workaround to s390 architecture to accomodate new irq init code. Unfortunately adding runtime irq assignment will not work but avoided breaking the existing code 0 0 0 2014-08-05 Matthew Minter New
[20/22] Added (untested) support to alpha nautilus boards to accomodate new irq init code 0 0 0 2014-08-05 Matthew Minter New
[21/22] Fixes so non PCI x86 systems should work 0 0 0 2014-08-05 Matthew Minter New
[22/22] Tidy up including documentation and messages 0 0 0 2014-08-05 Matthew Minter New
[1/5] RAS, trace: Update error definition format 0 0 0 2014-08-06 Chen Gong New
[2/5] PCI-e, AER: Replenish missed AER status bits for AER driver 0 0 0 2014-08-06 Chen Gong New
[3/5] PCI-e, trace: Replenish missed AER status bits for PCIE trace I/F 0 0 0 2014-08-06 Chen Gong New
[4/5] PCI-e, AER: Make AER UC status naming clearer 0 0 0 2014-08-06 Chen Gong New
[RFC,5/5] PCI, aer: Update initial value of UC error mask 0 0 0 2014-08-06 Chen Gong New
[RFC] Added code to ensure hot-added PCI devices are given an IRQ on rescan 0 0 0 2014-08-06 Matthew Minter New
PCI: imx6: fix boot hang when link already enabled 0 0 0 2014-08-06 Fabio Estevam New
[1/4] PCI: introduce helper functions for device flag operation 0 0 0 2014-08-08 ethan zhao New
« Previous 1 2 Next »