| Message ID | 20220721130116.43366-1-yangyicong@huawei.com |
|---|---|
| Headers | show |
| Series | Add support for HiSilicon PCIe Tune and Trace device | expand |
On Thu, 21 Jul 2022 at 07:03, <yangyicong@huawei.com> wrote: > > From: Yicong Yang <yangyicong@hisilicon.com> > > HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex > integrated Endpoint (RCiEP) device, providing the capability > to dynamically monitor and tune the PCIe traffic (tune), > and trace the TLP headers (trace). > > PTT tune is designed for monitoring and adjusting PCIe link parameters. > We provide several parameters of the PCIe link. Through the driver, > user can adjust the value of certain parameter to affect the PCIe link > for the purpose of enhancing the performance in certian situation. > > PTT trace is designed for dumping the TLP headers to the memory, which > can be used to analyze the transactions and usage condition of the PCIe > Link. Users can choose filters to trace headers, by either requester > ID, or those downstream of a set of Root Ports on the same core of the > PTT device. It's also supported to trace the headers of certain type and > of certain direction. > > The driver registers a PMU device for each PTT device. The trace can > be used through `perf record` and the traced headers can be decoded > by `perf report`. The perf command support for the device is also > added in this patchset. The tune can be used through the sysfs > attributes of related PMU device. See the documentation for the > detailed usage. > > Change since v10: > - Use title case in the documentation > - Add RB from Bagas, thanks. > Link: https://lore.kernel.org/lkml/20220714092710.53486-1-yangyicong@hisilicon.com/ > > Change since v9: > - Add sysfs ABI description documentation > - Remove the controversial available_{root_port, requester}_filters sysfs file > - Shorten 2 tune sysfs attributes name and add some comments > - Move hisi_ptt_process_auxtrace_info() to Patch 6. > - Add RB from Leo and Ack-by from Mathieu, thanks! You can add my Ack-by to patch 03 as well. See below for another comment. > Link: https://lore.kernel.org/lkml/20220606115555.41103-1-yangyicong@hisilicon.com/ > > Change since v8: > - Cleanups and one minor fix from Jonathan and John, thanks > Link: https://lore.kernel.org/lkml/20220516125223.32012-1-yangyicong@hisilicon.com/ > > Change since v7: > - Configure the DMA in probe rather than in runtime. Also use devres to manage > PMU device as we have no order problem now > - Refactor the config validation function per John and Leo > - Use a spinlock hisi_ptt::pmu_lock instead of mutex to serialize the perf process > in pmu::start as it's in atomic context > - Only commit the traced data when stop, per Leo and James > - Drop the filter dynamically updating patch from this series to simply the review > of the driver. That patch will be send separately. > - add a cpumask sysfs attribute and handle the cpu hotplug events, follow the > uncore PMU convention > - Other cleanups and fixes, both in driver and perf tool > Link: https://lore.kernel.org/lkml/20220407125841.3678-1-yangyicong@hisilicon.com/ > > Change since v6: > - Fix W=1 errors reported by lkp test, thanks > > Change since v5: > - Squash the PMU patch into PATCH 2 suggested by John > - refine the commit message of PATCH 1 and some comments > Link: https://lore.kernel.org/lkml/20220308084930.5142-1-yangyicong@hisilicon.com/ > > Change since v4: > Address the comments from Jonathan, John and Ma Ca, thanks. > - Use devm* also for allocating the DMA buffers > - Remove the IRQ handler stub in Patch 2 > - Make functions waiting for hardware state return boolean > - Manual remove the PMU device as it should be removed first > - Modifier the orders in probe and removal to make them matched well > - Make available {directions,type,format} array const and non-global > - Using the right filter list in filters show and well protect the > list with mutex > - Record the trace status with a boolean @started rather than enum > - Optimize the process of finding the PTT devices of the perf-tool > Link: https://lore.kernel.org/linux-pci/20220221084307.33712-1-yangyicong@hisilicon.com/ > > Change since v3: > Address the comments from Jonathan and John, thanks. > - drop members in the common struct which can be get on the fly > - reduce buffer struct and organize the buffers with array instead of list > - reduce the DMA reset wait time to avoid long time busy loop > - split the available_filters sysfs attribute into two files, for root port > and requester respectively. Update the documentation accordingly > - make IOMMU mapping check earlier in probe to avoid race condition. Also > make IOMMU quirk patch prior to driver in the series > - Cleanups and typos fixes from John and Jonathan > Link: https://lore.kernel.org/linux-pci/20220124131118.17887-1-yangyicong@hisilicon.com/ > > Change since v2: > - address the comments from Mathieu, thanks. > - rename the directory to ptt to match the function of the device > - spinoff the declarations to a separate header > - split the trace function to several patches > - some other comments. > - make default smmu domain type of PTT device to identity > Drop the RMR as it's not recommended and use an iommu_def_domain_type > quirk to passthrough the device DMA as suggested by Robin. > Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ > > Change since v1: > - switch the user interface of trace to perf from debugfs > - switch the user interface of tune to sysfs from debugfs > - add perf tool support to start trace and decode the trace data > - address the comments of documentation from Bjorn > - add RMR[1] support of the device as trace works in RMR mode or > direct DMA mode. RMR support is achieved by common APIs rather > than the APIs implemented in [1]. > Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ > [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ > > Qi Liu (3): > perf tool: arm: Refactor event list iteration in > auxtrace_record__init() > perf tool: Add support for HiSilicon PCIe Tune and Trace device driver > perf tool: Add support for parsing HiSilicon PCIe Trace packet > > Yicong Yang (5): > iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to > identity > hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe > Tune and Trace device > hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune > and Trace device > docs: trace: Add HiSilicon PTT device driver documentation > MAINTAINERS: Add maintainer for HiSilicon PTT driver > > .../ABI/testing/sysfs-devices-hisi_ptt | 61 + > Documentation/trace/hisi-ptt.rst | 298 +++++ > Documentation/trace/index.rst | 1 + > MAINTAINERS | 8 + > drivers/Makefile | 1 + > drivers/hwtracing/Kconfig | 2 + > drivers/hwtracing/ptt/Kconfig | 12 + > drivers/hwtracing/ptt/Makefile | 2 + > drivers/hwtracing/ptt/hisi_ptt.c | 1032 +++++++++++++++++ > drivers/hwtracing/ptt/hisi_ptt.h | 200 ++++ > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 + Everything above needs to go in one patchset and everything below in another one. The first patchset will need to be merged before the second one. Someone already commented on that. > tools/perf/arch/arm/util/auxtrace.c | 116 +- > tools/perf/arch/arm/util/pmu.c | 3 + > tools/perf/arch/arm64/util/Build | 2 +- > tools/perf/arch/arm64/util/hisi-ptt.c | 188 +++ > tools/perf/util/Build | 2 + > tools/perf/util/auxtrace.c | 4 + > tools/perf/util/auxtrace.h | 1 + > tools/perf/util/hisi-ptt-decoder/Build | 1 + > .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 164 +++ > .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 31 + > tools/perf/util/hisi-ptt.c | 192 +++ > tools/perf/util/hisi-ptt.h | 19 + > 23 files changed, 2341 insertions(+), 20 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-devices-hisi_ptt > create mode 100644 Documentation/trace/hisi-ptt.rst > create mode 100644 drivers/hwtracing/ptt/Kconfig > create mode 100644 drivers/hwtracing/ptt/Makefile > create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c > create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h > create mode 100644 tools/perf/arch/arm64/util/hisi-ptt.c > create mode 100644 tools/perf/util/hisi-ptt-decoder/Build > create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c > create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h > create mode 100644 tools/perf/util/hisi-ptt.c > create mode 100644 tools/perf/util/hisi-ptt.h > > -- > 2.24.0 >
在 7/21/2022 11:43 PM, Mathieu Poirier 写道: > On Thu, 21 Jul 2022 at 07:03, <yangyicong@huawei.com> wrote: >> From: Yicong Yang <yangyicong@hisilicon.com> >> >> HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex >> integrated Endpoint (RCiEP) device, providing the capability >> to dynamically monitor and tune the PCIe traffic (tune), >> and trace the TLP headers (trace). >> >> PTT tune is designed for monitoring and adjusting PCIe link parameters. >> We provide several parameters of the PCIe link. Through the driver, >> user can adjust the value of certain parameter to affect the PCIe link >> for the purpose of enhancing the performance in certian situation. >> >> PTT trace is designed for dumping the TLP headers to the memory, which >> can be used to analyze the transactions and usage condition of the PCIe >> Link. Users can choose filters to trace headers, by either requester >> ID, or those downstream of a set of Root Ports on the same core of the >> PTT device. It's also supported to trace the headers of certain type and >> of certain direction. >> >> The driver registers a PMU device for each PTT device. The trace can >> be used through `perf record` and the traced headers can be decoded >> by `perf report`. The perf command support for the device is also >> added in this patchset. The tune can be used through the sysfs >> attributes of related PMU device. See the documentation for the >> detailed usage. >> >> Change since v10: >> - Use title case in the documentation >> - Add RB from Bagas, thanks. >> Link: https://lore.kernel.org/lkml/20220714092710.53486-1-yangyicong@hisilicon.com/ >> >> Change since v9: >> - Add sysfs ABI description documentation >> - Remove the controversial available_{root_port, requester}_filters sysfs file >> - Shorten 2 tune sysfs attributes name and add some comments >> - Move hisi_ptt_process_auxtrace_info() to Patch 6. >> - Add RB from Leo and Ack-by from Mathieu, thanks! > You can add my Ack-by to patch 03 as well. See below for another comment. Thanks! >> Link: https://lore.kernel.org/lkml/20220606115555.41103-1-yangyicong@hisilicon.com/ >> >> Change since v8: >> - Cleanups and one minor fix from Jonathan and John, thanks >> Link: https://lore.kernel.org/lkml/20220516125223.32012-1-yangyicong@hisilicon.com/ >> >> Change since v7: >> - Configure the DMA in probe rather than in runtime. Also use devres to manage >> PMU device as we have no order problem now >> - Refactor the config validation function per John and Leo >> - Use a spinlock hisi_ptt::pmu_lock instead of mutex to serialize the perf process >> in pmu::start as it's in atomic context >> - Only commit the traced data when stop, per Leo and James >> - Drop the filter dynamically updating patch from this series to simply the review >> of the driver. That patch will be send separately. >> - add a cpumask sysfs attribute and handle the cpu hotplug events, follow the >> uncore PMU convention >> - Other cleanups and fixes, both in driver and perf tool >> Link: https://lore.kernel.org/lkml/20220407125841.3678-1-yangyicong@hisilicon.com/ >> >> Change since v6: >> - Fix W=1 errors reported by lkp test, thanks >> >> Change since v5: >> - Squash the PMU patch into PATCH 2 suggested by John >> - refine the commit message of PATCH 1 and some comments >> Link: https://lore.kernel.org/lkml/20220308084930.5142-1-yangyicong@hisilicon.com/ >> >> Change since v4: >> Address the comments from Jonathan, John and Ma Ca, thanks. >> - Use devm* also for allocating the DMA buffers >> - Remove the IRQ handler stub in Patch 2 >> - Make functions waiting for hardware state return boolean >> - Manual remove the PMU device as it should be removed first >> - Modifier the orders in probe and removal to make them matched well >> - Make available {directions,type,format} array const and non-global >> - Using the right filter list in filters show and well protect the >> list with mutex >> - Record the trace status with a boolean @started rather than enum >> - Optimize the process of finding the PTT devices of the perf-tool >> Link: https://lore.kernel.org/linux-pci/20220221084307.33712-1-yangyicong@hisilicon.com/ >> >> Change since v3: >> Address the comments from Jonathan and John, thanks. >> - drop members in the common struct which can be get on the fly >> - reduce buffer struct and organize the buffers with array instead of list >> - reduce the DMA reset wait time to avoid long time busy loop >> - split the available_filters sysfs attribute into two files, for root port >> and requester respectively. Update the documentation accordingly >> - make IOMMU mapping check earlier in probe to avoid race condition. Also >> make IOMMU quirk patch prior to driver in the series >> - Cleanups and typos fixes from John and Jonathan >> Link: https://lore.kernel.org/linux-pci/20220124131118.17887-1-yangyicong@hisilicon.com/ >> >> Change since v2: >> - address the comments from Mathieu, thanks. >> - rename the directory to ptt to match the function of the device >> - spinoff the declarations to a separate header >> - split the trace function to several patches >> - some other comments. >> - make default smmu domain type of PTT device to identity >> Drop the RMR as it's not recommended and use an iommu_def_domain_type >> quirk to passthrough the device DMA as suggested by Robin. >> Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ >> >> Change since v1: >> - switch the user interface of trace to perf from debugfs >> - switch the user interface of tune to sysfs from debugfs >> - add perf tool support to start trace and decode the trace data >> - address the comments of documentation from Bjorn >> - add RMR[1] support of the device as trace works in RMR mode or >> direct DMA mode. RMR support is achieved by common APIs rather >> than the APIs implemented in [1]. >> Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ >> [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ >> >> Qi Liu (3): >> perf tool: arm: Refactor event list iteration in >> auxtrace_record__init() >> perf tool: Add support for HiSilicon PCIe Tune and Trace device driver >> perf tool: Add support for parsing HiSilicon PCIe Trace packet >> >> Yicong Yang (5): >> iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to >> identity >> hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe >> Tune and Trace device >> hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune >> and Trace device >> docs: trace: Add HiSilicon PTT device driver documentation >> MAINTAINERS: Add maintainer for HiSilicon PTT driver >> >> .../ABI/testing/sysfs-devices-hisi_ptt | 61 + >> Documentation/trace/hisi-ptt.rst | 298 +++++ >> Documentation/trace/index.rst | 1 + >> MAINTAINERS | 8 + >> drivers/Makefile | 1 + >> drivers/hwtracing/Kconfig | 2 + >> drivers/hwtracing/ptt/Kconfig | 12 + >> drivers/hwtracing/ptt/Makefile | 2 + >> drivers/hwtracing/ptt/hisi_ptt.c | 1032 +++++++++++++++++ >> drivers/hwtracing/ptt/hisi_ptt.h | 200 ++++ >> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 + > Everything above needs to go in one patchset and everything below in > another one. The first patchset will need to be merged before the > second one. Someone already commented on that. ok. I put them together to provide an overall view of this and thought maintainers can take them separately. Will spilt the driver part and perf tool patches. I still don't know who will finally take the driver part. It should be Alexander from maintainer list but I got no response yet for a long time. Any hint for this? Thanks. >> tools/perf/arch/arm/util/auxtrace.c | 116 +- >> tools/perf/arch/arm/util/pmu.c | 3 + >> tools/perf/arch/arm64/util/Build | 2 +- >> tools/perf/arch/arm64/util/hisi-ptt.c | 188 +++ >> tools/perf/util/Build | 2 + >> tools/perf/util/auxtrace.c | 4 + >> tools/perf/util/auxtrace.h | 1 + >> tools/perf/util/hisi-ptt-decoder/Build | 1 + >> .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 164 +++ >> .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 31 + >> tools/perf/util/hisi-ptt.c | 192 +++ >> tools/perf/util/hisi-ptt.h | 19 + >> 23 files changed, 2341 insertions(+), 20 deletions(-) >> create mode 100644 Documentation/ABI/testing/sysfs-devices-hisi_ptt >> create mode 100644 Documentation/trace/hisi-ptt.rst >> create mode 100644 drivers/hwtracing/ptt/Kconfig >> create mode 100644 drivers/hwtracing/ptt/Makefile >> create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c >> create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h >> create mode 100644 tools/perf/arch/arm64/util/hisi-ptt.c >> create mode 100644 tools/perf/util/hisi-ptt-decoder/Build >> create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c >> create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h >> create mode 100644 tools/perf/util/hisi-ptt.c >> create mode 100644 tools/perf/util/hisi-ptt.h >> >> -- >> 2.24.0 >>
On Fri, 22 Jul 2022 at 08:53, Yicong Yang <yangyccccc@gmail.com> wrote: > > 在 7/21/2022 11:43 PM, Mathieu Poirier 写道: > > On Thu, 21 Jul 2022 at 07:03, <yangyicong@huawei.com> wrote: > >> From: Yicong Yang <yangyicong@hisilicon.com> > >> > >> HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex > >> integrated Endpoint (RCiEP) device, providing the capability > >> to dynamically monitor and tune the PCIe traffic (tune), > >> and trace the TLP headers (trace). > >> > >> PTT tune is designed for monitoring and adjusting PCIe link parameters. > >> We provide several parameters of the PCIe link. Through the driver, > >> user can adjust the value of certain parameter to affect the PCIe link > >> for the purpose of enhancing the performance in certian situation. > >> > >> PTT trace is designed for dumping the TLP headers to the memory, which > >> can be used to analyze the transactions and usage condition of the PCIe > >> Link. Users can choose filters to trace headers, by either requester > >> ID, or those downstream of a set of Root Ports on the same core of the > >> PTT device. It's also supported to trace the headers of certain type and > >> of certain direction. > >> > >> The driver registers a PMU device for each PTT device. The trace can > >> be used through `perf record` and the traced headers can be decoded > >> by `perf report`. The perf command support for the device is also > >> added in this patchset. The tune can be used through the sysfs > >> attributes of related PMU device. See the documentation for the > >> detailed usage. > >> > >> Change since v10: > >> - Use title case in the documentation > >> - Add RB from Bagas, thanks. > >> Link: https://lore.kernel.org/lkml/20220714092710.53486-1-yangyicong@hisilicon.com/ > >> > >> Change since v9: > >> - Add sysfs ABI description documentation > >> - Remove the controversial available_{root_port, requester}_filters sysfs file > >> - Shorten 2 tune sysfs attributes name and add some comments > >> - Move hisi_ptt_process_auxtrace_info() to Patch 6. > >> - Add RB from Leo and Ack-by from Mathieu, thanks! > > You can add my Ack-by to patch 03 as well. See below for another comment. > > Thanks! > > >> Link: https://lore.kernel.org/lkml/20220606115555.41103-1-yangyicong@hisilicon.com/ > >> > >> Change since v8: > >> - Cleanups and one minor fix from Jonathan and John, thanks > >> Link: https://lore.kernel.org/lkml/20220516125223.32012-1-yangyicong@hisilicon.com/ > >> > >> Change since v7: > >> - Configure the DMA in probe rather than in runtime. Also use devres to manage > >> PMU device as we have no order problem now > >> - Refactor the config validation function per John and Leo > >> - Use a spinlock hisi_ptt::pmu_lock instead of mutex to serialize the perf process > >> in pmu::start as it's in atomic context > >> - Only commit the traced data when stop, per Leo and James > >> - Drop the filter dynamically updating patch from this series to simply the review > >> of the driver. That patch will be send separately. > >> - add a cpumask sysfs attribute and handle the cpu hotplug events, follow the > >> uncore PMU convention > >> - Other cleanups and fixes, both in driver and perf tool > >> Link: https://lore.kernel.org/lkml/20220407125841.3678-1-yangyicong@hisilicon.com/ > >> > >> Change since v6: > >> - Fix W=1 errors reported by lkp test, thanks > >> > >> Change since v5: > >> - Squash the PMU patch into PATCH 2 suggested by John > >> - refine the commit message of PATCH 1 and some comments > >> Link: https://lore.kernel.org/lkml/20220308084930.5142-1-yangyicong@hisilicon.com/ > >> > >> Change since v4: > >> Address the comments from Jonathan, John and Ma Ca, thanks. > >> - Use devm* also for allocating the DMA buffers > >> - Remove the IRQ handler stub in Patch 2 > >> - Make functions waiting for hardware state return boolean > >> - Manual remove the PMU device as it should be removed first > >> - Modifier the orders in probe and removal to make them matched well > >> - Make available {directions,type,format} array const and non-global > >> - Using the right filter list in filters show and well protect the > >> list with mutex > >> - Record the trace status with a boolean @started rather than enum > >> - Optimize the process of finding the PTT devices of the perf-tool > >> Link: https://lore.kernel.org/linux-pci/20220221084307.33712-1-yangyicong@hisilicon.com/ > >> > >> Change since v3: > >> Address the comments from Jonathan and John, thanks. > >> - drop members in the common struct which can be get on the fly > >> - reduce buffer struct and organize the buffers with array instead of list > >> - reduce the DMA reset wait time to avoid long time busy loop > >> - split the available_filters sysfs attribute into two files, for root port > >> and requester respectively. Update the documentation accordingly > >> - make IOMMU mapping check earlier in probe to avoid race condition. Also > >> make IOMMU quirk patch prior to driver in the series > >> - Cleanups and typos fixes from John and Jonathan > >> Link: https://lore.kernel.org/linux-pci/20220124131118.17887-1-yangyicong@hisilicon.com/ > >> > >> Change since v2: > >> - address the comments from Mathieu, thanks. > >> - rename the directory to ptt to match the function of the device > >> - spinoff the declarations to a separate header > >> - split the trace function to several patches > >> - some other comments. > >> - make default smmu domain type of PTT device to identity > >> Drop the RMR as it's not recommended and use an iommu_def_domain_type > >> quirk to passthrough the device DMA as suggested by Robin. > >> Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ > >> > >> Change since v1: > >> - switch the user interface of trace to perf from debugfs > >> - switch the user interface of tune to sysfs from debugfs > >> - add perf tool support to start trace and decode the trace data > >> - address the comments of documentation from Bjorn > >> - add RMR[1] support of the device as trace works in RMR mode or > >> direct DMA mode. RMR support is achieved by common APIs rather > >> than the APIs implemented in [1]. > >> Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ > >> [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ > >> > >> Qi Liu (3): > >> perf tool: arm: Refactor event list iteration in > >> auxtrace_record__init() > >> perf tool: Add support for HiSilicon PCIe Tune and Trace device driver > >> perf tool: Add support for parsing HiSilicon PCIe Trace packet > >> > >> Yicong Yang (5): > >> iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to > >> identity > >> hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe > >> Tune and Trace device > >> hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune > >> and Trace device > >> docs: trace: Add HiSilicon PTT device driver documentation > >> MAINTAINERS: Add maintainer for HiSilicon PTT driver > >> > >> .../ABI/testing/sysfs-devices-hisi_ptt | 61 + > >> Documentation/trace/hisi-ptt.rst | 298 +++++ > >> Documentation/trace/index.rst | 1 + > >> MAINTAINERS | 8 + > >> drivers/Makefile | 1 + > >> drivers/hwtracing/Kconfig | 2 + > >> drivers/hwtracing/ptt/Kconfig | 12 + > >> drivers/hwtracing/ptt/Makefile | 2 + > >> drivers/hwtracing/ptt/hisi_ptt.c | 1032 +++++++++++++++++ > >> drivers/hwtracing/ptt/hisi_ptt.h | 200 ++++ > >> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 + > > Everything above needs to go in one patchset and everything below in > > another one. The first patchset will need to be merged before the > > second one. Someone already commented on that. > > ok. I put them together to provide an overall view of this and thought maintainers can take > them separately. Will spilt the driver part and perf tool patches. > > I still don't know who will finally take the driver part. It should be Alexander from maintainer > list but I got no response yet for a long time. Any hint for this? It will either be Peter, Greg or myself. We'll see when we get there.
On 2022/7/25 22:32, Mathieu Poirier wrote: > On Fri, 22 Jul 2022 at 08:53, Yicong Yang <yangyccccc@gmail.com> wrote: >> >> 在 7/21/2022 11:43 PM, Mathieu Poirier 写道: >>> On Thu, 21 Jul 2022 at 07:03, <yangyicong@huawei.com> wrote: >>>> From: Yicong Yang <yangyicong@hisilicon.com> >>>> >>>> HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex >>>> integrated Endpoint (RCiEP) device, providing the capability >>>> to dynamically monitor and tune the PCIe traffic (tune), >>>> and trace the TLP headers (trace). >>>> >>>> PTT tune is designed for monitoring and adjusting PCIe link parameters. >>>> We provide several parameters of the PCIe link. Through the driver, >>>> user can adjust the value of certain parameter to affect the PCIe link >>>> for the purpose of enhancing the performance in certian situation. >>>> >>>> PTT trace is designed for dumping the TLP headers to the memory, which >>>> can be used to analyze the transactions and usage condition of the PCIe >>>> Link. Users can choose filters to trace headers, by either requester >>>> ID, or those downstream of a set of Root Ports on the same core of the >>>> PTT device. It's also supported to trace the headers of certain type and >>>> of certain direction. >>>> >>>> The driver registers a PMU device for each PTT device. The trace can >>>> be used through `perf record` and the traced headers can be decoded >>>> by `perf report`. The perf command support for the device is also >>>> added in this patchset. The tune can be used through the sysfs >>>> attributes of related PMU device. See the documentation for the >>>> detailed usage. >>>> >>>> Change since v10: >>>> - Use title case in the documentation >>>> - Add RB from Bagas, thanks. >>>> Link: https://lore.kernel.org/lkml/20220714092710.53486-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v9: >>>> - Add sysfs ABI description documentation >>>> - Remove the controversial available_{root_port, requester}_filters sysfs file >>>> - Shorten 2 tune sysfs attributes name and add some comments >>>> - Move hisi_ptt_process_auxtrace_info() to Patch 6. >>>> - Add RB from Leo and Ack-by from Mathieu, thanks! >>> You can add my Ack-by to patch 03 as well. See below for another comment. >> >> Thanks! >> >>>> Link: https://lore.kernel.org/lkml/20220606115555.41103-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v8: >>>> - Cleanups and one minor fix from Jonathan and John, thanks >>>> Link: https://lore.kernel.org/lkml/20220516125223.32012-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v7: >>>> - Configure the DMA in probe rather than in runtime. Also use devres to manage >>>> PMU device as we have no order problem now >>>> - Refactor the config validation function per John and Leo >>>> - Use a spinlock hisi_ptt::pmu_lock instead of mutex to serialize the perf process >>>> in pmu::start as it's in atomic context >>>> - Only commit the traced data when stop, per Leo and James >>>> - Drop the filter dynamically updating patch from this series to simply the review >>>> of the driver. That patch will be send separately. >>>> - add a cpumask sysfs attribute and handle the cpu hotplug events, follow the >>>> uncore PMU convention >>>> - Other cleanups and fixes, both in driver and perf tool >>>> Link: https://lore.kernel.org/lkml/20220407125841.3678-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v6: >>>> - Fix W=1 errors reported by lkp test, thanks >>>> >>>> Change since v5: >>>> - Squash the PMU patch into PATCH 2 suggested by John >>>> - refine the commit message of PATCH 1 and some comments >>>> Link: https://lore.kernel.org/lkml/20220308084930.5142-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v4: >>>> Address the comments from Jonathan, John and Ma Ca, thanks. >>>> - Use devm* also for allocating the DMA buffers >>>> - Remove the IRQ handler stub in Patch 2 >>>> - Make functions waiting for hardware state return boolean >>>> - Manual remove the PMU device as it should be removed first >>>> - Modifier the orders in probe and removal to make them matched well >>>> - Make available {directions,type,format} array const and non-global >>>> - Using the right filter list in filters show and well protect the >>>> list with mutex >>>> - Record the trace status with a boolean @started rather than enum >>>> - Optimize the process of finding the PTT devices of the perf-tool >>>> Link: https://lore.kernel.org/linux-pci/20220221084307.33712-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v3: >>>> Address the comments from Jonathan and John, thanks. >>>> - drop members in the common struct which can be get on the fly >>>> - reduce buffer struct and organize the buffers with array instead of list >>>> - reduce the DMA reset wait time to avoid long time busy loop >>>> - split the available_filters sysfs attribute into two files, for root port >>>> and requester respectively. Update the documentation accordingly >>>> - make IOMMU mapping check earlier in probe to avoid race condition. Also >>>> make IOMMU quirk patch prior to driver in the series >>>> - Cleanups and typos fixes from John and Jonathan >>>> Link: https://lore.kernel.org/linux-pci/20220124131118.17887-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v2: >>>> - address the comments from Mathieu, thanks. >>>> - rename the directory to ptt to match the function of the device >>>> - spinoff the declarations to a separate header >>>> - split the trace function to several patches >>>> - some other comments. >>>> - make default smmu domain type of PTT device to identity >>>> Drop the RMR as it's not recommended and use an iommu_def_domain_type >>>> quirk to passthrough the device DMA as suggested by Robin. >>>> Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ >>>> >>>> Change since v1: >>>> - switch the user interface of trace to perf from debugfs >>>> - switch the user interface of tune to sysfs from debugfs >>>> - add perf tool support to start trace and decode the trace data >>>> - address the comments of documentation from Bjorn >>>> - add RMR[1] support of the device as trace works in RMR mode or >>>> direct DMA mode. RMR support is achieved by common APIs rather >>>> than the APIs implemented in [1]. >>>> Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ >>>> [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ >>>> >>>> Qi Liu (3): >>>> perf tool: arm: Refactor event list iteration in >>>> auxtrace_record__init() >>>> perf tool: Add support for HiSilicon PCIe Tune and Trace device driver >>>> perf tool: Add support for parsing HiSilicon PCIe Trace packet >>>> >>>> Yicong Yang (5): >>>> iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to >>>> identity >>>> hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe >>>> Tune and Trace device >>>> hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune >>>> and Trace device >>>> docs: trace: Add HiSilicon PTT device driver documentation >>>> MAINTAINERS: Add maintainer for HiSilicon PTT driver >>>> >>>> .../ABI/testing/sysfs-devices-hisi_ptt | 61 + >>>> Documentation/trace/hisi-ptt.rst | 298 +++++ >>>> Documentation/trace/index.rst | 1 + >>>> MAINTAINERS | 8 + >>>> drivers/Makefile | 1 + >>>> drivers/hwtracing/Kconfig | 2 + >>>> drivers/hwtracing/ptt/Kconfig | 12 + >>>> drivers/hwtracing/ptt/Makefile | 2 + >>>> drivers/hwtracing/ptt/hisi_ptt.c | 1032 +++++++++++++++++ >>>> drivers/hwtracing/ptt/hisi_ptt.h | 200 ++++ >>>> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 + >>> Everything above needs to go in one patchset and everything below in >>> another one. The first patchset will need to be merged before the >>> second one. Someone already commented on that. >> >> ok. I put them together to provide an overall view of this and thought maintainers can take >> them separately. Will spilt the driver part and perf tool patches. >> >> I still don't know who will finally take the driver part. It should be Alexander from maintainer >> list but I got no response yet for a long time. Any hint for this? > > It will either be Peter, Greg or myself. We'll see when we get there. Thanks a lot for the information! Since it's going to be the merge window soon, I'll continue this on the next cycle. Regards.
From: Yicong Yang <yangyicong@hisilicon.com> HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex integrated Endpoint (RCiEP) device, providing the capability to dynamically monitor and tune the PCIe traffic (tune), and trace the TLP headers (trace). PTT tune is designed for monitoring and adjusting PCIe link parameters. We provide several parameters of the PCIe link. Through the driver, user can adjust the value of certain parameter to affect the PCIe link for the purpose of enhancing the performance in certian situation. PTT trace is designed for dumping the TLP headers to the memory, which can be used to analyze the transactions and usage condition of the PCIe Link. Users can choose filters to trace headers, by either requester ID, or those downstream of a set of Root Ports on the same core of the PTT device. It's also supported to trace the headers of certain type and of certain direction. The driver registers a PMU device for each PTT device. The trace can be used through `perf record` and the traced headers can be decoded by `perf report`. The perf command support for the device is also added in this patchset. The tune can be used through the sysfs attributes of related PMU device. See the documentation for the detailed usage. Change since v10: - Use title case in the documentation - Add RB from Bagas, thanks. Link: https://lore.kernel.org/lkml/20220714092710.53486-1-yangyicong@hisilicon.com/ Change since v9: - Add sysfs ABI description documentation - Remove the controversial available_{root_port, requester}_filters sysfs file - Shorten 2 tune sysfs attributes name and add some comments - Move hisi_ptt_process_auxtrace_info() to Patch 6. - Add RB from Leo and Ack-by from Mathieu, thanks! Link: https://lore.kernel.org/lkml/20220606115555.41103-1-yangyicong@hisilicon.com/ Change since v8: - Cleanups and one minor fix from Jonathan and John, thanks Link: https://lore.kernel.org/lkml/20220516125223.32012-1-yangyicong@hisilicon.com/ Change since v7: - Configure the DMA in probe rather than in runtime. Also use devres to manage PMU device as we have no order problem now - Refactor the config validation function per John and Leo - Use a spinlock hisi_ptt::pmu_lock instead of mutex to serialize the perf process in pmu::start as it's in atomic context - Only commit the traced data when stop, per Leo and James - Drop the filter dynamically updating patch from this series to simply the review of the driver. That patch will be send separately. - add a cpumask sysfs attribute and handle the cpu hotplug events, follow the uncore PMU convention - Other cleanups and fixes, both in driver and perf tool Link: https://lore.kernel.org/lkml/20220407125841.3678-1-yangyicong@hisilicon.com/ Change since v6: - Fix W=1 errors reported by lkp test, thanks Change since v5: - Squash the PMU patch into PATCH 2 suggested by John - refine the commit message of PATCH 1 and some comments Link: https://lore.kernel.org/lkml/20220308084930.5142-1-yangyicong@hisilicon.com/ Change since v4: Address the comments from Jonathan, John and Ma Ca, thanks. - Use devm* also for allocating the DMA buffers - Remove the IRQ handler stub in Patch 2 - Make functions waiting for hardware state return boolean - Manual remove the PMU device as it should be removed first - Modifier the orders in probe and removal to make them matched well - Make available {directions,type,format} array const and non-global - Using the right filter list in filters show and well protect the list with mutex - Record the trace status with a boolean @started rather than enum - Optimize the process of finding the PTT devices of the perf-tool Link: https://lore.kernel.org/linux-pci/20220221084307.33712-1-yangyicong@hisilicon.com/ Change since v3: Address the comments from Jonathan and John, thanks. - drop members in the common struct which can be get on the fly - reduce buffer struct and organize the buffers with array instead of list - reduce the DMA reset wait time to avoid long time busy loop - split the available_filters sysfs attribute into two files, for root port and requester respectively. Update the documentation accordingly - make IOMMU mapping check earlier in probe to avoid race condition. Also make IOMMU quirk patch prior to driver in the series - Cleanups and typos fixes from John and Jonathan Link: https://lore.kernel.org/linux-pci/20220124131118.17887-1-yangyicong@hisilicon.com/ Change since v2: - address the comments from Mathieu, thanks. - rename the directory to ptt to match the function of the device - spinoff the declarations to a separate header - split the trace function to several patches - some other comments. - make default smmu domain type of PTT device to identity Drop the RMR as it's not recommended and use an iommu_def_domain_type quirk to passthrough the device DMA as suggested by Robin. Link: https://lore.kernel.org/linux-pci/20211116090625.53702-1-yangyicong@hisilicon.com/ Change since v1: - switch the user interface of trace to perf from debugfs - switch the user interface of tune to sysfs from debugfs - add perf tool support to start trace and decode the trace data - address the comments of documentation from Bjorn - add RMR[1] support of the device as trace works in RMR mode or direct DMA mode. RMR support is achieved by common APIs rather than the APIs implemented in [1]. Link: https://lore.kernel.org/lkml/1618654631-42454-1-git-send-email-yangyicong@hisilicon.com/ [1] https://lore.kernel.org/linux-acpi/20210805080724.480-1-shameerali.kolothum.thodi@huawei.com/ Qi Liu (3): perf tool: arm: Refactor event list iteration in auxtrace_record__init() perf tool: Add support for HiSilicon PCIe Tune and Trace device driver perf tool: Add support for parsing HiSilicon PCIe Trace packet Yicong Yang (5): iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device docs: trace: Add HiSilicon PTT device driver documentation MAINTAINERS: Add maintainer for HiSilicon PTT driver .../ABI/testing/sysfs-devices-hisi_ptt | 61 + Documentation/trace/hisi-ptt.rst | 298 +++++ Documentation/trace/index.rst | 1 + MAINTAINERS | 8 + drivers/Makefile | 1 + drivers/hwtracing/Kconfig | 2 + drivers/hwtracing/ptt/Kconfig | 12 + drivers/hwtracing/ptt/Makefile | 2 + drivers/hwtracing/ptt/hisi_ptt.c | 1032 +++++++++++++++++ drivers/hwtracing/ptt/hisi_ptt.h | 200 ++++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 + tools/perf/arch/arm/util/auxtrace.c | 116 +- tools/perf/arch/arm/util/pmu.c | 3 + tools/perf/arch/arm64/util/Build | 2 +- tools/perf/arch/arm64/util/hisi-ptt.c | 188 +++ tools/perf/util/Build | 2 + tools/perf/util/auxtrace.c | 4 + tools/perf/util/auxtrace.h | 1 + tools/perf/util/hisi-ptt-decoder/Build | 1 + .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.c | 164 +++ .../hisi-ptt-decoder/hisi-ptt-pkt-decoder.h | 31 + tools/perf/util/hisi-ptt.c | 192 +++ tools/perf/util/hisi-ptt.h | 19 + 23 files changed, 2341 insertions(+), 20 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-devices-hisi_ptt create mode 100644 Documentation/trace/hisi-ptt.rst create mode 100644 drivers/hwtracing/ptt/Kconfig create mode 100644 drivers/hwtracing/ptt/Makefile create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h create mode 100644 tools/perf/arch/arm64/util/hisi-ptt.c create mode 100644 tools/perf/util/hisi-ptt-decoder/Build create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.c create mode 100644 tools/perf/util/hisi-ptt-decoder/hisi-ptt-pkt-decoder.h create mode 100644 tools/perf/util/hisi-ptt.c create mode 100644 tools/perf/util/hisi-ptt.h