From patchwork Wed Feb 19 12:39:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1240693 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 48My3N67b9z9sRJ for ; Wed, 19 Feb 2020 23:39:44 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727333AbgBSMjo (ORCPT ); Wed, 19 Feb 2020 07:39:44 -0500 Received: from mx2.suse.de ([195.135.220.15]:52796 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726530AbgBSMjn (ORCPT ); Wed, 19 Feb 2020 07:39:43 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id AFA58B442; Wed, 19 Feb 2020 12:39:41 +0000 (UTC) From: Nicolas Saenz Julienne To: linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, f.fainelli@gmail.com, gregkh@linuxfoundation.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, wahrenst@gmx.net, Nicolas Saenz Julienne , Andrew Murray Subject: [PATCH v2 0/4] Raspberry Pi 4 VL805 firmware load support Date: Wed, 19 Feb 2020 13:39:29 +0100 Message-Id: <20200219123933.2792-1-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.25.0 MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideCore. This series adds support for the later. Note that there are a set of constraints we have to consider (some of them I missed on v1): - We need to make sure the VideoCore firmware interface is up and running before running the VL805 firmware load call. - There is no way to discern RPi4's VL805 chip from other platforms', so we need the firmware load to happen *before* running quirk_usb_handoff_xhci(). Failure to do so results in an unwarranted 5 second wait while the fixup code polls xHC's unexisting state. As per Stefan Wahren's comments I tested the behaviour on outdated firmware. Boards dependent on this will not boot if firmware is not up-to-date. Older boards with outdated firmware will fail to execute the VideoCore firmware call, but xHCI will perform reliably. I added a warning printout in case of failure. I'm aware that Florian Fianelli noted on the previous revision that waiting on the VideoCore firmware interface during PCIe's probe is far from ideal. But this was before taking into account the second constraint mentioned above. Impact on non RPi4 boards is minimal. --- Changes since v1: - Split things into their own patches - Wait for mailbox interface in pcie-brcmstb - Move firmware load code into RPi4 platform code - Move firmware load to usb/pci-quirks.c - Fix behaviour on outdated firmware Nicolas Saenz Julienne (4): soc: bcm2835: Sync xHCI reset firmware property with downstream firmware: raspberrypi: Introduce vl805 init routine PCI: brcmstb: Wait for Raspberry Pi's firmware when present USB: pci-quirks: Add Raspberry Pi 4 quirk drivers/firmware/raspberrypi.c | 37 ++++++++++++++++++++++ drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++ drivers/usb/host/pci-quirks.c | 18 +++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 9 +++++- 4 files changed, 78 insertions(+), 1 deletion(-)