mbox series

[v7,0/3] PCI: qcom: ep: Add basic interconnect support

Message ID 1688099123-28036-1-git-send-email-quic_krichai@quicinc.com
Headers show
Series PCI: qcom: ep: Add basic interconnect support | expand

Message

Krishna Chaitanya Chundru June 30, 2023, 4:25 a.m. UTC 
Add basic support for managing "pcie-mem" interconnect path by setting
a low constraint before enabling clocks and updating it after the link
is up based on link speed and width the device got enumerated.

chnages from v6:
	- addressed the comments as suggested by mani.
changes from v5:
        - addressed the comments by mani.
changes from v4:
        - rebased with linux-next.
        - Added comments as suggested by mani.
        - removed the arm: dts: qcom: sdx55: Add interconnect path
          as that patch is already applied.
changes from v3:
        - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
         errors.
        - Added macros in the qcom ep driver patch as suggested by Dmitry
changes from v2:
        - changed the logic for getting speed and width as suggested
         by bjorn.
        - fixed compilation errors.


Krishna chaitanya chundru (3):
  dt-bindings: PCI: qcom: ep: Add interconnects path
  arm: dts: qcom: sdx65: Add PCIe interconnect path
  PCI: qcom-ep: Add ICC bandwidth voting support

 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 13 ++++
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |  3 +
 drivers/pci/controller/dwc/pcie-qcom-ep.c          | 71 ++++++++++++++++++++++
 3 files changed, 87 insertions(+)

Comments

Krishna Chaitanya Chundru July 12, 2023, 5:07 a.m. UTC | #1 
Hi All,

A gentle ping.


Thanks,

KC

On 6/30/2023 9:55 AM, Krishna chaitanya chundru wrote:
> Add basic support for managing "pcie-mem" interconnect path by setting
> a low constraint before enabling clocks and updating it after the link
> is up based on link speed and width the device got enumerated.
>
> chnages from v6:
> 	- addressed the comments as suggested by mani.
> changes from v5:
>          - addressed the comments by mani.
> changes from v4:
>          - rebased with linux-next.
>          - Added comments as suggested by mani.
>          - removed the arm: dts: qcom: sdx55: Add interconnect path
>            as that patch is already applied.
> changes from v3:
>          - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
>           errors.
>          - Added macros in the qcom ep driver patch as suggested by Dmitry
> changes from v2:
>          - changed the logic for getting speed and width as suggested
>           by bjorn.
>          - fixed compilation errors.
>
>
> Krishna chaitanya chundru (3):
>    dt-bindings: PCI: qcom: ep: Add interconnects path
>    arm: dts: qcom: sdx65: Add PCIe interconnect path
>    PCI: qcom-ep: Add ICC bandwidth voting support
>
>   .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 13 ++++
>   arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |  3 +
>   drivers/pci/controller/dwc/pcie-qcom-ep.c          | 71 ++++++++++++++++++++++
>   3 files changed, 87 insertions(+)
>