mbox series

[v2,0/6] Add PCIe EP support for SDX65

Message ID 1678277993-18836-1-git-send-email-quic_rohiagar@quicinc.com
Headers show
Series Add PCIe EP support for SDX65 | expand

Message

Rohit Agarwal March 8, 2023, 12:19 p.m. UTC 
Hi,

Changes in v2:
 - Addressing comments from Konrad and Dmitry.
 - Rebased on top of 6.3-rc1.

This series adds the devicetree support for PCIe PHY and PCIe EP on SDX65.
The PCIe EP is enabled on SDX65 MTP board.

Thanks,
Rohit.

Rohit Agarwal (6):
  dt-bindings: mfd: qcom,tcsr: Add compatible for sdx65
  dt-bindings: PCI: qcom: Add SDX65 SoC
  ARM: dts: qcom: sdx65: Add support for PCIe PHY
  ARM: dts: qcom: sdx65: Add support for PCIe EP
  ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
  ARM: dts: qcom: sdx65-mtp: Enable PCIe EP

 .../devicetree/bindings/mfd/qcom,tcsr.yaml         |  1 +
 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      |  2 +
 arch/arm/boot/dts/qcom-sdx65-mtp.dts               | 50 ++++++++++--
 arch/arm/boot/dts/qcom-sdx65.dtsi                  | 92 ++++++++++++++++++++++
 4 files changed, 140 insertions(+), 5 deletions(-)