diff mbox

[3/3,NAND,OMAP] : Fixing issue in oamp nand driver in prefetch mode read

Message ID ce9ab5791001060606w46483e93o753913c01752a4b6@mail.gmail.com
State New, archived
Headers show

Commit Message

vimal singh Jan. 6, 2010, 2:06 p.m. UTC
From 3700088e8da8c890d9e4c6eb626e18287d149b97 Mon Sep 17 00:00:00 2001
From: Vimal Singh <vimalsingh@ti.com>
Date: Tue, 5 Jan 2010 16:37:03 +0530
Subject: [PATCH] NAND: OMAP: Fixing issue in oamp nand driver in
prefetch mode read

There is a bug in nand prefetch read routine, which comes into effect
only if nand device is a 16-bit device (as we have in zoom boards).
This bug is effective only with below combination of conditions:
1. nand deivce, in use, is a 16 bit device
2. nand driver supports 'subpage' read
3. SW ECC is in use

This was not seen old  kernel (ex: .23), because when, in early days,
we tested this (nand prefetch read in LDP boards) there was no
'subpage read' support.
Later when we had subpage read in (.27) kernel, we had hw ecc enabled
always in our internal tree. So, we missed this bug.

This patch fixes the issue.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
---
 drivers/mtd/nand/omap2.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)

 	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
diff mbox

Patch

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 16120e2..7df303a 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -295,11 +295,14 @@  static void omap_read_buf_pref(struct mtd_info
*mtd, u_char *buf, int len)
 	u32 *p = (u32 *)buf;

 	/* take care of subpage reads */
-	for (; len % 4 != 0; ) {
-		*buf++ = __raw_readb(info->nand.IO_ADDR_R);
-		len--;
+	if (len % 4) {
+		if (info->nand.options & NAND_BUSWIDTH_16)
+			omap_read_buf16(mtd, buf, len % 4);
+		else
+			omap_read_buf8(mtd, buf, len % 4);
+		p = (u32 *) (buf + len % 4);
+		len -= len % 4;
 	}
-	p = (u32 *) buf;

 	/* configure and start prefetch transfer */