Message ID | 582ADBC4.3000000@sigmadesigns.com |
---|---|
State | Accepted |
Commit | 3371d663bb4579f1b2003a92162edd6d90edd089 |
Headers | show |
Hi Mark, On Tue, 15 Nov 2016 10:56:20 +0100 Marc Gonzalez <marc_gonzalez@sigmadesigns.com> wrote: > If your controller already sends the required NAND commands when > reading or writing a page, then the framework is not supposed to > send READ0 and SEQIN/PAGEPROG respectively. > > Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Applied the whole series. Just a small request for your future contributions, can you please group the patches of a specific version in the same thread instead of making them answers to my previous reviews? Thanks, Boris > --- > v3: > ecc->write_subpage handling > don't use WARN_ON > --- > drivers/mtd/nand/nand_base.c | 34 +++++++++++++++++++++++++++++++--- > include/linux/mtd/nand.h | 12 ++++++++++++ > 2 files changed, 43 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c > index 50cdf37cb8e4..e7034f3bcace 100644 > --- a/drivers/mtd/nand/nand_base.c > +++ b/drivers/mtd/nand/nand_base.c > @@ -1970,7 +1970,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, > __func__, buf); > > read_retry: > - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); > + if (nand_standard_page_accessors(&chip->ecc)) > + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); > > /* > * Now read the page into the buffer. Absent an error, > @@ -2658,7 +2659,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, > else > subpage = 0; > > - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); > + if (nand_standard_page_accessors(&chip->ecc)) > + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); > > if (unlikely(raw)) > status = chip->ecc.write_page_raw(mtd, chip, buf, > @@ -2681,7 +2683,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, > > if (!cached || !NAND_HAS_CACHEPROG(chip)) { > > - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); > + if (nand_standard_page_accessors(&chip->ecc)) > + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); > status = chip->waitfunc(mtd, chip); > /* > * See if operation failed and additional status checks are > @@ -4539,6 +4542,26 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) > return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; > } > > +static bool invalid_ecc_page_accessors(struct nand_chip *chip) > +{ > + struct nand_ecc_ctrl *ecc = &chip->ecc; > + > + if (nand_standard_page_accessors(ecc)) > + return false; > + > + /* > + * NAND_ECC_CUSTOM_PAGE_ACCESS flag is set, make sure the NAND > + * controller driver implements all the page accessors because > + * default helpers are not suitable when the core does not > + * send the READ0/PAGEPROG commands. > + */ > + return (!ecc->read_page || !ecc->write_page || > + !ecc->read_page_raw || !ecc->write_page_raw || > + (NAND_HAS_SUBPAGE_READ(chip) && !ecc->read_subpage) || > + (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage && > + ecc->hwctl && ecc->calculate)); > +} > + > /** > * nand_scan_tail - [NAND Interface] Scan for the NAND device > * @mtd: MTD device structure > @@ -4559,6 +4582,11 @@ int nand_scan_tail(struct mtd_info *mtd) > !(chip->bbt_options & NAND_BBT_USE_FLASH))) > return -EINVAL; > > + if (invalid_ecc_page_accessors(chip)) { > + pr_err("Invalid ECC page accessors setup\n"); > + return -EINVAL; > + } > + > if (!(chip->options & NAND_OWN_BUFFERS)) { > nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize > + mtd->oobsize * 3, GFP_KERNEL); > diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h > index 06d0c9d740f7..c5f3a012ae62 100644 > --- a/include/linux/mtd/nand.h > +++ b/include/linux/mtd/nand.h > @@ -142,6 +142,12 @@ enum nand_ecc_algo { > */ > #define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) > #define NAND_ECC_MAXIMIZE BIT(1) > +/* > + * If your controller already sends the required NAND commands when > + * reading or writing a page, then the framework is not supposed to > + * send READ0 and SEQIN/PAGEPROG respectively. > + */ > +#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2) > > /* Bit mask for flags passed to do_nand_read_ecc */ > #define NAND_GET_DEVICE 0x80 > @@ -186,6 +192,7 @@ enum nand_ecc_algo { > /* Macros to identify the above */ > #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) > #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) > +#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE) > > /* Non chip related options */ > /* This option skips the bbt scan during initialization. */ > @@ -568,6 +575,11 @@ struct nand_ecc_ctrl { > int page); > }; > > +static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc) > +{ > + return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS); > +} > + > /** > * struct nand_buffers - buffer structure for read/write > * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 50cdf37cb8e4..e7034f3bcace 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1970,7 +1970,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, __func__, buf); read_retry: - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); + if (nand_standard_page_accessors(&chip->ecc)) + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); /* * Now read the page into the buffer. Absent an error, @@ -2658,7 +2659,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, else subpage = 0; - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + if (nand_standard_page_accessors(&chip->ecc)) + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) status = chip->ecc.write_page_raw(mtd, chip, buf, @@ -2681,7 +2683,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, if (!cached || !NAND_HAS_CACHEPROG(chip)) { - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + if (nand_standard_page_accessors(&chip->ecc)) + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); /* * See if operation failed and additional status checks are @@ -4539,6 +4542,26 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; } +static bool invalid_ecc_page_accessors(struct nand_chip *chip) +{ + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (nand_standard_page_accessors(ecc)) + return false; + + /* + * NAND_ECC_CUSTOM_PAGE_ACCESS flag is set, make sure the NAND + * controller driver implements all the page accessors because + * default helpers are not suitable when the core does not + * send the READ0/PAGEPROG commands. + */ + return (!ecc->read_page || !ecc->write_page || + !ecc->read_page_raw || !ecc->write_page_raw || + (NAND_HAS_SUBPAGE_READ(chip) && !ecc->read_subpage) || + (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage && + ecc->hwctl && ecc->calculate)); +} + /** * nand_scan_tail - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure @@ -4559,6 +4582,11 @@ int nand_scan_tail(struct mtd_info *mtd) !(chip->bbt_options & NAND_BBT_USE_FLASH))) return -EINVAL; + if (invalid_ecc_page_accessors(chip)) { + pr_err("Invalid ECC page accessors setup\n"); + return -EINVAL; + } + if (!(chip->options & NAND_OWN_BUFFERS)) { nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize + mtd->oobsize * 3, GFP_KERNEL); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 06d0c9d740f7..c5f3a012ae62 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -142,6 +142,12 @@ enum nand_ecc_algo { */ #define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) #define NAND_ECC_MAXIMIZE BIT(1) +/* + * If your controller already sends the required NAND commands when + * reading or writing a page, then the framework is not supposed to + * send READ0 and SEQIN/PAGEPROG respectively. + */ +#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2) /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -186,6 +192,7 @@ enum nand_ecc_algo { /* Macros to identify the above */ #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) +#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ @@ -568,6 +575,11 @@ struct nand_ecc_ctrl { int page); }; +static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc) +{ + return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS); +} + /** * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
If your controller already sends the required NAND commands when reading or writing a page, then the framework is not supposed to send READ0 and SEQIN/PAGEPROG respectively. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> --- v3: ecc->write_subpage handling don't use WARN_ON --- drivers/mtd/nand/nand_base.c | 34 +++++++++++++++++++++++++++++++--- include/linux/mtd/nand.h | 12 ++++++++++++ 2 files changed, 43 insertions(+), 3 deletions(-)