@@ -834,8 +834,8 @@ config LPC_ICH
help
The LPC bridge function of the Intel ICH provides support for
many functional units. This driver provides needed support for
- other drivers to control these functions, currently GPIO and
- watchdog.
+ other drivers to control these functions, currently GPIO,
+ watchdog, and boot ROM.
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
@@ -115,6 +115,7 @@ static struct resource gpio_ich_res[] = {
enum lpc_cells {
LPC_WDT = 0,
LPC_GPIO,
+ LPC_ROM,
};
static struct mfd_cell lpc_ich_cells[] = {
@@ -130,6 +131,12 @@ static struct mfd_cell lpc_ich_cells[] = {
.resources = gpio_ich_res,
.ignore_resource_conflicts = true,
},
+ [LPC_ROM] = {
+ .name = "esb2rom",
+ .num_resources = 0,
+ .resources = NULL,
+ .ignore_resource_conflicts = true,
+ },
};
/* chipset related info */
@@ -206,6 +213,7 @@ struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
[LPC_ICH2] = {
.name = "ICH2",
.iTCO_version = 1,
+ .esb2rom_present = 1,
},
[LPC_ICH2M] = {
.name = "ICH2-M",
@@ -214,6 +222,7 @@ struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
[LPC_ICH3] = {
.name = "ICH3-S",
.iTCO_version = 1,
+ .esb2rom_present = 1,
},
[LPC_ICH3M] = {
.name = "ICH3-M",
@@ -222,6 +231,7 @@ struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
[LPC_ICH4] = {
.name = "ICH4",
.iTCO_version = 1,
+ .esb2rom_present = 1,
},
[LPC_ICH4M] = {
.name = "ICH4-M",
@@ -234,10 +244,12 @@ struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
[LPC_ICH5] = {
.name = "ICH5 or ICH5R",
.iTCO_version = 1,
+ .esb2rom_present = 1,
},
[LPC_6300ESB] = {
.name = "6300ESB",
.iTCO_version = 1,
+ .esb2rom_present = 1,
},
[LPC_ICH6] = {
.name = "ICH6 or ICH6R",
@@ -258,6 +270,7 @@ struct lpc_ich_info lpc_chipset_info[] __devinitdata = {
.name = "631xESB/632xESB",
.iTCO_version = 2,
.gpio_version = ICH_V6_GPIO,
+ .esb2rom_present = 1,
},
[LPC_ICH7] = {
.name = "ICH7 or ICH7R",
@@ -831,6 +844,21 @@ wdt_done:
return ret;
}
+static int __devinit lpc_ich_init_rom(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int ret;
+
+ if (!lpc_chipset_info[id->driver_data].esb2rom_present)
+ return -ENODEV;
+
+ lpc_ich_finalize_cell(&lpc_ich_cells[LPC_ROM], id);
+ ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_ROM],
+ 1, NULL, 0);
+
+ return ret;
+}
+
static int __devinit lpc_ich_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
@@ -845,6 +873,10 @@ static int __devinit lpc_ich_probe(struct pci_dev *dev,
if (!ret)
cell_added = true;
+ ret = lpc_ich_init_rom(dev, id);
+ if (!ret)
+ cell_added = true;
+
/*
* We only care if at least one or none of the cells registered
* successfully.
@@ -207,6 +207,7 @@ config MTD_ICHXROM
config MTD_ESB2ROM
tristate "BIOS flash chip on Intel ESB Controller Hub 2"
depends on X86 && MTD_JEDECPROBE && PCI
+ select LPC_ICH
help
Support for treating the BIOS flash chip on ESB2 motherboards
as an MTD device - with this you can reprogram your BIOS.
@@ -10,21 +10,18 @@
* Eric Biederman, of course, was a major help in this effort.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
-#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/flashchip.h>
#include <linux/pci.h>
-#include <linux/pci_ids.h>
#include <linux/list.h>
-
-#define MOD_NAME KBUILD_BASENAME
+#include <linux/mfd/core.h>
#define ADDRESS_NAME_LEN 18
@@ -99,7 +96,7 @@ struct esb2rom_window {
unsigned long size;
struct list_head maps;
struct resource rsrc;
- struct pci_dev *pdev;
+ struct platform_device *dev;
};
struct esb2rom_map_info {
@@ -107,7 +104,7 @@ struct esb2rom_map_info {
struct map_info map;
struct mtd_info *mtd;
struct resource rsrc;
- char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
+ char map_name[sizeof(KBUILD_MODNAME) + 2 + ADDRESS_NAME_LEN];
};
static struct esb2rom_window esb2rom_window = {
@@ -117,11 +114,12 @@ static struct esb2rom_window esb2rom_window = {
static void esb2rom_cleanup(struct esb2rom_window *window)
{
struct esb2rom_map_info *map, *scratch;
+ struct pci_dev *pdev = to_pci_dev(window->dev->dev.parent);
u8 byte;
/* Disable writes through the rom window */
- pci_read_config_byte(window->pdev, BIOS_CNTL, &byte);
- pci_write_config_byte(window->pdev, BIOS_CNTL,
+ pci_read_config_byte(pdev, BIOS_CNTL, &byte);
+ pci_write_config_byte(pdev, BIOS_CNTL,
byte & ~BIOS_WRITE_ENABLE);
/* Free all of the mtd devices */
@@ -141,15 +139,15 @@ static void esb2rom_cleanup(struct esb2rom_window *window)
window->phys = 0;
window->size = 0;
}
- pci_dev_put(window->pdev);
+ pci_dev_put(pdev);
}
-static int __devinit esb2rom_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __devinit esb2rom_init_one(struct platform_device *dev)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
struct esb2rom_window *window = &esb2rom_window;
struct esb2rom_map_info *map = NULL;
+ struct pci_dev *pdev = to_pci_dev(dev->dev.parent);
unsigned long map_top;
u8 byte;
u16 word;
@@ -164,28 +162,24 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
* Also you can page firmware hubs if an 8MiB window isn't enough
* but don't currently handle that case either.
*/
- window->pdev = pci_dev_get(pdev);
+ window->dev = dev;
+ pci_dev_get(pdev);
/* RLG: experiment 2. Force the window registers to the widest values */
/*
pci_read_config_word(pdev, FWH_DEC_EN1, &word);
- printk(KERN_DEBUG "Original FWH_DEC_EN1 : %x\n", word);
- pci_write_config_byte(pdev, FWH_DEC_EN1, 0xff);
- pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
- printk(KERN_DEBUG "New FWH_DEC_EN1 : %x\n", byte);
-
- pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
- printk(KERN_DEBUG "Original FWH_DEC_EN2 : %x\n", byte);
- pci_write_config_byte(pdev, FWH_DEC_EN2, 0x0f);
- pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
- printk(KERN_DEBUG "New FWH_DEC_EN2 : %x\n", byte);
+ pr_debug("Original FWH_DEC_EN1 : %x\n", word);
+ pci_write_config_word(pdev, FWH_DEC_EN1, 0x0fff);
+ pci_read_config_word(pdev, FWH_DEC_EN1, &word);
+ pr_debug("New FWH_DEC_EN1 : %x\n", word);
*/
+
/* Find a region continuous to the end of the ROM window */
window->phys = 0;
pci_read_config_word(pdev, FWH_DEC_EN1, &word);
- printk(KERN_DEBUG "pci_read_config_word : %x\n", word);
+ pr_debug("pci_read_config_word : %x\n", word);
if ((word & FWH_8MiB) == FWH_8MiB)
window->phys = 0xff400000;
@@ -213,7 +207,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
window->phys = 0xfff80000;
if (window->phys == 0) {
- printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
+ pr_err("ROM window is closed\n");
goto out;
}
@@ -227,7 +221,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
/* The BIOS will generate an error if I enable
* this device, so don't even try.
*/
- printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
+ pr_err("firmware access control, I can't enable writes\n");
goto out;
}
pci_write_config_byte(pdev, BIOS_CNTL, byte | BIOS_WRITE_ENABLE);
@@ -236,21 +230,20 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
* Try to reserve the window mem region. If this fails then
* it is likely due to the window being "reseved" by the BIOS.
*/
- window->rsrc.name = MOD_NAME;
+ window->rsrc.name = KBUILD_MODNAME;
window->rsrc.start = window->phys;
window->rsrc.end = window->phys + window->size - 1;
window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&iomem_resource, &window->rsrc)) {
window->rsrc.parent = NULL;
- printk(KERN_DEBUG MOD_NAME ": "
- "%s(): Unable to register resource %pR - kernel bug?\n",
+ pr_debug("%s(): Unable to register resource %pR - kernel bug?\n",
__func__, &window->rsrc);
}
/* Map the firmware hub into my address space. */
window->virt = ioremap_nocache(window->phys, window->size);
if (!window->virt) {
- printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
+ pr_err("ioremap(%08lx, %08lx) failed\n",
window->phys, window->size);
goto out;
}
@@ -279,7 +272,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
if (!map)
map = kmalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
- printk(KERN_ERR MOD_NAME ": kmalloc failed");
+ pr_err("kmalloc failed");
goto out;
}
memset(map, 0, sizeof(*map));
@@ -292,7 +285,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
sprintf(map->map_name, "%s @%08Lx",
- MOD_NAME, (unsigned long long)map->map.phys);
+ KBUILD_MODNAME, (unsigned long long)map->map.phys);
/* Firmware hubs only use vpp when being programmed
* in a factory setting. So in-place programming
@@ -321,8 +314,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
found:
/* Trim the size if we are larger than the map */
if (map->mtd->size > map->map.size) {
- printk(KERN_WARNING MOD_NAME
- " rom(%llu) larger than window(%lu). fixing...\n",
+ pr_warn("ROM(%llu) larger than window(%lu). fixing...\n",
(unsigned long long)map->mtd->size, map->map.size);
map->mtd->size = map->map.size;
}
@@ -337,8 +329,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
map->rsrc.end = map->map.phys + map->mtd->size - 1;
map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&window->rsrc, &map->rsrc)) {
- printk(KERN_ERR MOD_NAME
- ": cannot reserve MTD resource\n");
+ pr_err("cannot reserve MTD resource\n");
map->rsrc.parent = NULL;
}
}
@@ -378,70 +369,32 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
return 0;
}
-static void __devexit esb2rom_remove_one (struct pci_dev *pdev)
+static int __devexit esb2rom_remove_one(struct platform_device *dev)
{
struct esb2rom_window *window = &esb2rom_window;
- esb2rom_cleanup(window);
-}
-static struct pci_device_id esb2rom_pci_tbl[] __devinitdata = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
- PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
- PCI_ANY_ID, PCI_ANY_ID, },
- { 0, },
-};
+ esb2rom_cleanup(window);
-#if 0
-MODULE_DEVICE_TABLE(pci, esb2rom_pci_tbl);
+ return 0;
+}
-static struct pci_driver esb2rom_driver = {
- .name = MOD_NAME,
- .id_table = esb2rom_pci_tbl,
- .probe = esb2rom_init_one,
- .remove = esb2rom_remove_one,
+static struct platform_driver esb2rom_driver = {
+ .probe = esb2rom_init_one,
+ .remove = __devexit_p(esb2rom_remove_one),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ },
};
-#endif
static int __init init_esb2rom(void)
{
- struct pci_dev *pdev;
- struct pci_device_id *id;
- int retVal;
-
- pdev = NULL;
- for (id = esb2rom_pci_tbl; id->vendor; id++) {
- printk(KERN_DEBUG "device id = %x\n", id->device);
- pdev = pci_get_device(id->vendor, id->device, NULL);
- if (pdev) {
- printk(KERN_DEBUG "matched device = %x\n", id->device);
- break;
- }
- }
- if (pdev) {
- printk(KERN_DEBUG "matched device id %x\n", id->device);
- retVal = esb2rom_init_one(pdev, &esb2rom_pci_tbl[0]);
- pci_dev_put(pdev);
- printk(KERN_DEBUG "retVal = %d\n", retVal);
- return retVal;
- }
- return -ENXIO;
-#if 0
- return pci_register_driver(&esb2rom_driver);
-#endif
+ return platform_driver_register(&esb2rom_driver);
}
static void __exit cleanup_esb2rom(void)
{
- esb2rom_remove_one(esb2rom_window.pdev);
+ platform_driver_unregister(&esb2rom_driver);
}
module_init(init_esb2rom);
@@ -450,3 +403,4 @@ module_exit(cleanup_esb2rom);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lew Glendenning <lglendenning@lnxi.com>");
MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ESB2 southbridge");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
@@ -43,6 +43,7 @@ struct lpc_ich_info {
char name[32];
unsigned int iTCO_version;
unsigned int gpio_version;
+ unsigned int esb2rom_present;
};
#endif
Move esb2rom PCI device scanning to lpc_ich. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> --- drivers/mfd/Kconfig | 4 +- drivers/mfd/lpc_ich.c | 32 +++++++++++ drivers/mtd/maps/Kconfig | 1 + drivers/mtd/maps/esb2rom.c | 130 ++++++++++++++----------------------------- include/linux/mfd/lpc_ich.h | 1 + 5 files changed, 78 insertions(+), 90 deletions(-)