| Message ID | 20240404083157.940-1-ansuelsmth@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v4] mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec() | expand |
On Thu, 2024-04-04 at 08:31:55 UTC, Christian Marangi wrote: > While migrating to exec_ops in commit a82990c8a409 ("mtd: rawnand: qcom: > Add read/read_start ops in exec_op path"), OP_RESET_DEVICE command handling > got broken unintentionally. Right now for the OP_RESET_DEVICE command, > qcom_misc_cmd_type_exec() will simply return 0 without handling it. Even, > if that gets fixed, an unnecessary FLASH_STATUS read descriptor command is > being added in the middle and that seems to be causing the command to fail > on IPQ806x devices. > > So let's fix the above two issues to make OP_RESET_DEVICE command working > again. > > Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") > Cc: stable@vger.kernel.org > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes, thanks. Miquel
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index b079605c84d3..b8cff9240b28 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub host->cfg0_raw & ~(7 << CW_PER_PAGE)); nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw); instrs = 3; - } else { + } else if (q_op.cmd_reg != OP_RESET_DEVICE) { return 0; } @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub nandc_set_reg(chip, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL); - (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0, - 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc, - NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + if (q_op.cmd_reg == OP_BLOCK_ERASE) + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
While migrating to exec_ops in commit a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path"), OP_RESET_DEVICE command handling got broken unintentionally. Right now for the OP_RESET_DEVICE command, qcom_misc_cmd_type_exec() will simply return 0 without handling it. Even, if that gets fixed, an unnecessary FLASH_STATUS read descriptor command is being added in the middle and that seems to be causing the command to fail on IPQ806x devices. So let's fix the above two issues to make OP_RESET_DEVICE command working again. Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v4: - Rework commit title and description as suggested. - Add Reviewed-by tag Changes v3: - Merge patches - Rework commit description Changes v2: - Split patches drivers/mtd/nand/raw/qcom_nandc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)