diff mbox series

[v1,1/2] jffs2: introduce jffs2_nandflash()

Message ID 20231019073838.17586-2-mmkurbanov@salutedevices.com
State New
Headers show
Series jffs2: make cleanmarker support option | expand

Commit Message

Martin Kurbanov Oct. 19, 2023, 7:38 a.m. UTC 
Introduce jffs2_nandflash() instead of jffs2_cleanmarker_oob().
The jffs2_nandflash() is used to determine the type of flash.
And the jffs2_cleanmarker_oob() determines whether cleanmarkers
are needed.

The function name is chosen by analogy with jffs2_dataflash() and
jffs2_ubivol().

This is a preparation patch making further changes a bit cleaner
(no functional change).

Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
 fs/jffs2/erase.c    | 2 +-
 fs/jffs2/fs.c       | 4 ++--
 fs/jffs2/os-linux.h | 3 +++
 fs/jffs2/scan.c     | 2 +-
 4 files changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index acd32f05b519..4475de5206c0 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -173,7 +173,7 @@  static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
 {
 	/* For NAND, if the failure did not occur at the device level for a
 	   specific physical page, don't bother updating the bad block table. */
-	if (jffs2_cleanmarker_oob(c) && (bad_offset != (uint32_t)MTD_FAIL_ADDR_UNKNOWN)) {
+	if (jffs2_nandflash(c) && (bad_offset != (uint32_t)MTD_FAIL_ADDR_UNKNOWN)) {
 		/* We had a device-level failure to erase.  Let's see if we've
 		   failed too many times. */
 		if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 038516bee1ab..6de91c00eb73 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -687,7 +687,7 @@  struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
 static int jffs2_flash_setup(struct jffs2_sb_info *c) {
 	int ret = 0;
 
-	if (jffs2_cleanmarker_oob(c)) {
+	if (jffs2_nandflash(c)) {
 		/* NAND flash... do setup accordingly */
 		ret = jffs2_nand_flash_setup(c);
 		if (ret)
@@ -720,7 +720,7 @@  static int jffs2_flash_setup(struct jffs2_sb_info *c) {
 
 void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
 
-	if (jffs2_cleanmarker_oob(c)) {
+	if (jffs2_nandflash(c)) {
 		jffs2_nand_flash_cleanup(c);
 	}
 
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 8da19766c101..c604f639a00f 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -81,6 +81,7 @@  static inline void jffs2_init_inode_info(struct jffs2_inode_info *f)
 #define jffs2_flush_wbuf_pad(c) ({ do{} while(0); (void)(c), 0; })
 #define jffs2_flush_wbuf_gc(c, i) ({ do{} while(0); (void)(c), (void) i, 0; })
 #define jffs2_write_nand_badblock(c,jeb,bad_offset) (1)
+#define jffs2_nandflash(c) (0)
 #define jffs2_nand_flash_setup(c) (0)
 #define jffs2_nand_flash_cleanup(c) do {} while(0)
 #define jffs2_wbuf_dirty(c) (0)
@@ -124,6 +125,8 @@  void jffs2_wbuf_timeout(unsigned long data);
 void jffs2_wbuf_process(void *data);
 int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino);
 int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c);
+
+#define jffs2_nandflash(c) ((c)->mtd->type == MTD_NANDFLASH)
 int jffs2_nand_flash_setup(struct jffs2_sb_info *c);
 void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c);
 
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 29671e33a171..005d0af950ea 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -113,7 +113,7 @@  int jffs2_scan_medium(struct jffs2_sb_info *c)
 	if (!flashbuf) {
 		/* For NAND it's quicker to read a whole eraseblock at a time,
 		   apparently */
-		if (jffs2_cleanmarker_oob(c))
+		if (jffs2_nandflash(c))
 			try_size = c->sector_size;
 		else
 			try_size = PAGE_SIZE;