| Message ID | 20230816104245.2676965-2-hsinyi@chromium.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/2] mtd: spi-nor: giga: gd25lq64c: Disable quad mode according to bus width | expand |
On Wed, Aug 16, 2023 at 6:42 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote: > > Some of the SKUs are using gigadevice gd25lq64c flash chip. The chip > default enables quad mode, which results in the write protect pin set to > IO pin. In mt8183 kukui, we won't use quad enable for all SKUs, so apply > the property to disable spi nor's quad mode. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- change log: v1->v2: use existing property. v1 link: https://lore.kernel.org/lkml/20230815154412.713846-1-hsinyi@chromium.org/ --- > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > index 6ce16a265e053..ef472b522f2e7 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > @@ -877,6 +877,7 @@ w25q64dw: flash@0 { > compatible = "winbond,w25q64dw", "jedec,spi-nor"; > reg = <0>; > spi-max-frequency = <25000000>; > + spi-rx-bus-width = <2>; > }; > }; > > -- > 2.41.0.694.ge786442a9b-goog >
Hi, On Wed, Aug 16, 2023 at 3:43 AM Hsin-Yi Wang <hsinyi@chromium.org> wrote: > > Some of the SKUs are using gigadevice gd25lq64c flash chip. The chip > default enables quad mode, which results in the write protect pin set to > IO pin. In mt8183 kukui, we won't use quad enable for all SKUs, so apply > the property to disable spi nor's quad mode. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > index 6ce16a265e053..ef472b522f2e7 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > @@ -877,6 +877,7 @@ w25q64dw: flash@0 { > compatible = "winbond,w25q64dw", "jedec,spi-nor"; > reg = <0>; > spi-max-frequency = <25000000>; > + spi-rx-bus-width = <2>; This feels wrong to me. Is your controller actually capable of "dual SPI"? If so, why wasn't the rx-bus-width specified before? ...and if you're truly capable of "dual SPI" then why aren't you also setting the tx-bus-width? My best guess (I can look up the schematic if needed) is that you're actually _single_ lane, not dual lane SPI. Thus, a more accurate description would probably be: spi-rx-bus-width = <1>; spi-tx-bus-width = <1>; ...but... I think that the default of rx/tx bus width isn't specified is "1". Thus I think you should drop this patch. -Doug
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6ce16a265e053..ef472b522f2e7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -877,6 +877,7 @@ w25q64dw: flash@0 { compatible = "winbond,w25q64dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; + spi-rx-bus-width = <2>; }; };
Some of the SKUs are using gigadevice gd25lq64c flash chip. The chip default enables quad mode, which results in the write protect pin set to IO pin. In mt8183 kukui, we won't use quad enable for all SKUs, so apply the property to disable spi nor's quad mode. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 + 1 file changed, 1 insertion(+)